Pyle PLMRKT33WT Owner's manual

1

PLMRKT33WT

OWNER’S MANUAL

Mobile Audio System

 PLL Synthesizer Stereo Radio

 Automatic Memory Storing

 Preset Equalization

 USB/ SD Interface

 3.5mm Jack input

www.PyleUSA.com

2

CONTENTS

Installation ........................................... 3

Take out screw before installation ......... 3

DIN Front-Mount ................................. 3

Installing the unit ............................... 3

Removing the unit ............................. 4

Wiring Connection .............................. 5

Operation ............................................. 6

Location of keys .................................... 6

Switching on/off the unit ........................ 7

Sound adjustment ................................. 7

Liquid crystal display ............................. 7

Auxiliary input ....................................... 7

Reset function ....................................... 7

Radio operation .................................... 8

Switching to radio mode .................... 8

Selecting the frequency band ............ 8

Selecting station ................................ 8

Automatic memory storing&

program scanning ............................. 8

Station storing ................................... 8

USB play operation ............................... 8

Selecting tracks in single step ........... 8

Selecting directory up/down .............. 9

Pausing playing ................................. 9

Previewing all tracks .......................... 9

Repeating the same track ................. 9

Playing all tracks in random .............. 9

SD operation ......................................... 9

Remote control ................................... 10

Specification ....................................... 11

Trouble shooting ................................. 12

3

INSTALLATION

Notes:

 Choose the mounting location where

the unit will not interfere with the

normal driving function of the driver.

 Before finally installing the unit, connect

the wiring temporarily and make sure it

is all connected up properly and the

unit and the system work properly.

 Use only the parts included with the

unit to ensure proper installation. The

use of unauthorized parts can cause

malfunctions.

 Consult with your nearest dealer if

installation requires the drilling of holes

or other modifications of the vehicle.

 Install the unit where it does not get in

the driver’s way and cannot injure the

passenger if there is a sudden stop, like

an emergency stop.

 If installation angel exceeds 30°from

horizontal, the unit might not give its

optimum performance.

 Avoid installing the unit where it would

be subject to high temperature, such as

from direct sunlight, or from hot air,

from the heater, or where it would be

subject to dust, dirt or excessive

vibration.

DIN FRONT-MOUNT

Installation Opening

This unit can be installed in any dashboard

having an opening as shown below:

Installing the unit

Be sure you test all connections first, and

then follow these steps to install the unit.

1. Make sure the ignition is turned off, and

then disconnect the cable from the

vehicle battery’s negative (-) terminal.

2. Disconnect the wire harness and the

antenna.

3. Mount the sleeve by inserting the sleeve

into the opening of the dashboard and

bend open the tabs located around the

sleeve with a

screwdriver. Not all tabs will be able to

make contact, so examine which ones

will be most effective. Bending open the

appropriate tabs behind the dashboard

to secure the sleeve in place.

Tabs

Screwdriver

Sleeve

Dashboard

4. Reconnect the wire harness and the

antenna and be careful not to pinch any

wires or cables.

5. Slide the unit into the sleeve until it

locks into place.

6. To further secure the unit, use the

supplied metal strap to secure the back

of the unit in place. Use the supplied

hardware (Hex Nut (M5mm) and Spring

Washer) to attach one end of the strap

to the mounting bolt on the back of the

unit. If necessary, bend the metal strap

to fit your vehicle’s mounting area. Then

use the supplied hardware (Tapping

30

53mm

182mm

4

Mounting Bolt

Plain Washer

Tapping Screw

Metal Strap

Spring Washer

Hex Nut

INSTALLATION

Screw (5x25mm) and Plain Washer) to

attach the other end of metal strap to a

solid metal part of the vehicle under the

dashboard. This strap also helps ensure

proper electrical grounding of the unit.

Note to install the short threading

terminal of the mounting bolt to the back

of the unit and the other long threading

terminal to the dashboard.

7. Reconnect the cable to the vehicle

battery’s negative (-) terminal. Then

replace the outer trim ring.

Removing the unit

1. Make sure the ignition is turned off, then

disconnect the cable from the vehicle

battery’s negative (-) terminal.

2. Remove the metal strap attached the

back of the unit (if attached).

3. Lift the top of the outer trim ring then pull

it out to remove it.

4. Insert both of the supplied keys into the

slots at the middle left and right sides of

the unit, then pull the unit out of the

dashboard.

5

WIRING CONNECTION

ISO CONNECTION

6

OPERATION

LOCATION OF KEYS

1. 8/ (SEEK DOWN) button

2. PUSH/SEL/ENT

3. 9/ (SEEK UP) button

4. IR

5. LCD

6. PWR/MODE

7. AS/PS

8. SD interface

9. USB interface

10. AUX IN

11. 0/DISP

12. 7/WB/BAND

13. 6DIR+

14. 5 DIR-

15. 4RDM

16. 3 RPT

17. 2 INT

18. 1PAU

19. Reset function

7

OPERATION

SWITCHING ON/OFF THE UNIT

Press PWR button (6) to turn on the unit.

When the unit is on. Press and hold for 2

seconds to turn off the unit.

SOUND ADJUSTMENT

Press SEL button (2) shortly to select the

desired adjustment mode. The adjustment

mode will be changed in the following

order:

→BAS-TRE-BAL-FAD-BEEP-EQ-LOUD-LOC-

STEREO-VOL

BAS: bass

TRE: treble

BAL: balance

FAD: fader

LOUD: loudness

EQ: equalization

DX: distance

ST:stereo

VOL: volume

By rotating the audio knob (2) it is possible

to adjust the desired sound quality.

Press and hold SEL for 2 seconds. You can

choose the area between USA and

EUROPE by rotating the knob (2).

EQ FUNCTION

In EQ item you can select the preset EQ

mode by rotating the audio knob (2) as

below:

FLAT---POP--- ROCK---CLASS---EQ OFF

SHOW THE TIME

Press DISP button (11) to show the time for

several seconds. After several seconds it

will return to show the information.

SET THE TIME

Press and hold DISP button (11) for 2

seconds the HH digit will flash. Press the

/ to change the hour. After that press

DISP button the “MM” will flash. Press the

/ to change the minute. Then press DISP

button to confirm.

LOUDNESS

In LOUD item, rotating the audio knob (2) to

turn it on/off.

LIQUID CRYSTAL DISPLAY

Exhibit current frequency and activated

functions on the display .

LOCAL function

Press SEL knob several times till appear

“DX”. Rotating the audio knob (2) to switch it

to local mode. In LOC mode the unit will

reduce the receiving sensitivity when you

search station. That means you can receive

the station that sound is good. It will ignores

the station that sound is not good. In DX

mode it will increase the receiving

sensitivity when you search the station.

That means you can receive more stations.

STEREO /MONO function

In STEREO item rotating the audio knob (2)

to choose STEREO or MONO mode. In

STEREO mode you can receive FM stereo

signal. In MONO mode the stereo station

will be switched to monochrome.

Sometimes when the signal is not good. If

you change it to MONO mode. The noise

will be reduced.

AUXILIARY INPUT

The unit can be connected to a portable

audio player through the AUX IN jack (10).

RESET FUNCTION

RESET button (19) must be activated with

either a ballpoint pen or thin metal object.

The RESET button is to be activated for the

following reasons:

- Initial installation of the unit when all

wiring is completed.

- All the function buttons do not operate.

- Error symbol on the display.

Note: if press RESET button (19), the unit

can’t work yet, please use a cotton swab

8

OPERATION

soaked in isopropyl alcohol to clean the

socket on the front panel.

RADIO OPERATION

 SWITCHING TO RADIO MODE

Press MODE button (6) to select radio

mode, the radio mode appears in the

display together with the memory band

and frequency.

 SELECTING THE FREQUENCY BAND

At radio mode, press 7/BAND button

(12) shortly to select the desired band.

The reception band will change in the

following order:

→FM1→FM2→FM3→WB→AM1→AM2

 SELECTING STATION

Press 9/ button (3) or 8/ button (1)

shortly to activate automatic seek

function. It will search up/down a station

automatically. Press for 2 seconds until

“MANUAL” appears on the display, the

manual tuning mode is selected. In this

mode you can turn up/down a step

frequency one by one till searched a

station. If both buttons have not been

pressed for several seconds, they will

return to seek tuning mode and “AUTO”

appears on the display.

 AUTOMATIC MEMORY STORING &

PROGRAM SCANNING

- Automatic memory storing

Press AS/PS button (7) for 87.5MHz

frequency and checks the signal strength

until one cycle search is finished. And

then some stations are stored into the

corresponding preset number button. In

the first cycle it will in LOCAL mode to

receive the stronger station. If it is less

than 18 pcs station it will searching

stations in 2

nd

cycle in DX (distance)

mode.

- Program scanning

Press AS/PS button (7) shortly to scan

preset station. The radio is holding at that

preset number for several seconds with

release mute, then searches again.

 MANUALLY STORING STATION AND

RECALL PRESET STATION

To receive a station, Press one of the

preset button(1~6) for 2 seconds. The

current station is stored into the number

button. Shortly press the preset button (1~6)

to directly listen the station that saved in the

corresponding preset button.

In WEATHER BAND.

1 button(20): 162.550MHz

2 button(21): 162.400MHz

3 button(22): 162.475MHz

4 button(23): 162.425MHz

5 button(24): 162.450MHz

6 button(25): 162.500MHz

The next station is 162.525 MHz.

Press / button to change these

stations.

USB PLAY OPERATION

On the front panel of the unit, there is an

USB interface (9). You can connect an USB

driver through this interface (9). When you

connect an USB driver through the

interface, the unit will search the MP3/WMA

files and start to play. If in other mode, you

can also press MODE button (6) to select

USB mode.

The operation please refer to the following

instruction.

SELECTING SONGS IN SINGLE STEP

Press button (3) or button (1) to

move to the following song or the previous

song. Song number shows on display.

Press and hold button (3) or button

(1) for 2 seconds to fast forward or fast

reverse. Song playing starts from when you

9

OPERATION

release the button.

SELECTING DIRECTORY UP/DOWN

Press DIR- button (14) or DIR+ button (13)

to select previous directory or next

directory.

PAUSING PLAYING

Press PAU button (18) to pause playing.

Press it again to resume playing.

PREVIEWING ALL FILES

Press INT button (17) to INTRO each file.

Press again to stop intro and start to play.

REPEATING PLAYING

Press RPT button (16) to continuously

repeat the same file. Press it again to

repeat all files.

PLAYING IN RANDOM ORDER

Shortly press RDM button (15) to play all

files in random order. Press it again to

cancel the function.

SELECTING SONGS BY AS/PS BUTTON

Press AS/PS button (7) to active the file

search mode. It will show “TRKSCH” for 1

second then show “ T* * *”. In this moment

rotate VOL knob(2) to select the song

number and press SEL(2) to confirm. The

unit searches the track and plays. Also you

can directly enter the song number and

press SEL (2) to confirm. The number

definition is below:

1 PAU: 1

2 INT : 2

3 RPT : 3

4 RDM: 4

5 DIR- : 5

6 DIR+ : 6

7/BAND: 7

8/ : 8

9/ : 9

0/DISP: 0

If enter the wrong number. You can press

AS/PS button to delete the wrong number.

SD OPERATION

There is a SD interface (8) on the front

panel of the unit.

When you insert a SD card in the SD

interface, the unit will search the MP3 files

or WMA files in the card and start to play

automatically. The operation is the same

with the USB play operation described

above.

If in other mode, you can also press MODE

button (6) to select SD mode.

CAUTION：

When there are important files in the USB

Device or SD card, do not connect it to the

main unit to play, because any wrong

operation may cause files loss. And our

company assumes no responsibility for this.

10

REMOTE CONTROL (OPTIONAL)

FUNCTION KEY & CONTROL

1. Power ON/OFF Button.

2. VOL+ Volume up button.

3. BAND Band Select Button.

4. SEL Sound Mode Select Button

5. Radio mode: seek/turn down station.

MP3 mode: skip to the previous file or fast reverse.

6. EQ Press it to select desired audio equalization.

7. 1/ Radio mode: Preset number 1.

MP3 mode: Pause/playing file.

8. 4/RDM Radio mode: Preset number 4

MP3 mode: Turn on/off the random function.

9. 6/+10/DIR+: Radio mode: Preset number 6.

MP3 mode: shortly press for next directory.

Long press for +10 songs function).

10. 5/-10/DIR-: Radio mode: Preset number 5.

MP3 mode: shortly press for previous directory.

Long press for -10 songs function)

11. 3/RPT Radio mode: Preset number 3.

MP3 mode: Repeat one/all.

12. 2/INT Radio mode: Preset number 2.

MP3 mode: Turn on/off the INTRO function.

13. DISP Press DISP to show the time.

14. VOL- Volume down button.

15. Radio mode: seek/turn up station.

MP3 mode: skip to the next file or fast forward.

16. AMS Same as the AS/PS function. See page 10

MP3 mode: File search function.

17. Press to mute the sound. Press it again to recover the

Sound.

18. MODE Press to change the source.

11

SPECIFICATION

GENERAL

Power Supply Requirements : DC 12 Volts, Negative Ground

Chassis Dimensions : 178 (W) x 97 (D) x 50 (H)

Tone Controls

- Bass (at 100 Hz) : ±10 dB

- Treble (at 10 kHz) : ±10 dB

Maximum Output Power

- High power : 4x50 watts

Current Drain

- High power: : 10 Ampere (max.)

RADIO

For 2 Bands

FM

Frequency Coverage 87.5 to 107.9 MHz.

IF 10.7 MHz

Sensitivity (S/N=30dB) 4μV

Stereo Separation >25dB

AM

Frequency Coverage 530 to 1710 KHz

IF 450 kHz

Sensitivity (S/N=20dB) 36 dBuV

12

TROUBLE SHOOTING

Before going through the checklist, check wiring connection. If any of the problems persist

after checklist has been made, consult your nearest service dealer.

Symptom

Cause

Solution

No power.

The car ignition switch is

not on.

If the power supply is

connected to the car accessory

circuits, but the engine is not

moving, switch the ignition key

to “ACC”.

The fuse is blown.

Replace the fuse.

No sound.

Volume is in minimum

Adjust volume to a desired level.

Wiring is not properly

connected.

Check wiring connection.

The operation

keys do not

work.

The built-in microcomputer

is not operating properly

due to noise.

Press the reset button.

The radio does

not Work. The

radio station

automatic

selection does

not work.

The antenna cable is not

connected.

Insert the antenna cable firmly.

The signals are too weak.

Select a station manually.

Pyle PLMRKT33WT Owner's manual

Pyle PLMRKT33WT Owner's manual

Related papers

Other documents