INSTRUCTION FOR USE
Ionic Hairbrush
• Slide the switch up to the on position ‘I’, the on indicator light will
illuminate.
• Turning on the appliance will automatically activate the ionic
technology. Please note: the release of the ions produces a slight
buzzing noise.
• Simply brush dry hair to calm frizz and static.
• After each use, slide the switch down to the ‘0’ position which will
turn the appliance off.
WARNING! Do not touch the multi-bre negative ion dispenser.
WARNING! If the appliance remains unused for a while or if the batteries
have run down, remove them from the unit. These precautions will
extend the life of the product.
Replacing the Batteries
To replace the batteries once they begin to run down:
• Twist the battery compartment cover to the unlocked position then
slide the battery cover off the brush.
• Insert the rst battery negative end rst, followed by the second
battery, negative end rst, so the positive end is against the battery
compartment cover once replaced.
• Replace the battery compartment cover back over the end of the
brush and twist it back into place to the locked position.
Please Note: When the batteries have run down, they should be
disposed of at a recycling centre to safeguard the environment. If the
batteries leak, avoid touching them and dispose of them at a recycling
centre.
• Non-rechargeable batteries are not to be recharged.
• Rechargeable batteries must be removed from the device before
being re-charged.
• If the appliance is to be stored unused for a long period, the batteries
should be removed.
• The supply terminals are not to be short-circuited.