Sakar protrack pt-2600 User manual

Brand: Sakar

Model: protrack pt-2600

Category: Activity trackers

Type: User manual

ProTrack

Wireless Activity Tracker

Instruction Manual

Item #PT-2600

Introduction

The ProTrack Wireless Activity Tracker allows you to track your steps, distance and calories burned. It is

compatible with iOS and Android devices so that you can track your daily, weekly, monthly and yearly data via

app on your mobile device or tablet. Please read this manual first before using this device in order to get best

results.

Intended Use

The ProTrack Wireless Activity Tracker is a home fitness product only and it is not intended to serve as a

substitute for the advice of a physician or medical professional. Do not use this device for diagnosis or

treatment of any health problem or disease. This is not a medical device.

Important Note

Your ProTrack Wireless Activity Tracker can be used as a Bluetooth device so that you can monitor your steps

using iPhones and iPads which run iOS 7 and above, and Android devices running Android 4.3 or above. In

addition, your phone or tablet needs to support Bluetooth LE (Bluetooth low energy). To use your activity

tracker with your smartphone or tablet, you must make sure the Bluetooth function is enabled.

Initial Synchronization of the Time and Date

IMPORTANT: You must first set the time and date of your ProTrack device before you initially wear it and start

measuring,

To set the device time and date:

1. Download the ProTrack Fitness application to your compatible mobile device.

See the ‘Installing the ProTrack Fitness App’ section for further information and instructions.

2. Launch the ProTrack application and complete the initial set up. It is very important during this initial set

up to make sure your ProTrack device has been successfully connected and paired to the ProTrack

application on your mobile device. Once your ProTrack device and the ProTrack app are paired, the date

and time on each will be synched.

See the ‘Initial Setup and Device Pairing’ section for further information and instructions regarding the

initial setup.

NOTE: If you do not sync the device’s date and time to your smart phone/tablet’s date and time before

using your ProTrack device, the measurements will be deleted when you do sync your device with the app

upon first use. You will lose your measurements if the date and time sync is not done before you begin

exercising.

3. Once you have completed the initial set up and pairing of your device, check that the time on your device

and the time on your compatible smart phone/tablet are the same. If they are not, tap Daily Activity from

the home screen to automatically sync the date and time.

NOTE: After use, when the battery level is low, make sure to sync your measurements to the app before the

battery depletes and you install a new, fresh battery. After changing to a new battery, you must re-sync your

device’s time and date to your smart phone/tablet.

Package Contents

1. ProTrack Wireless Activity Tracker

2. Watch band

3. Belt clip

4. Battery (CR2025 Lithium Coin Battery)

5. Instruction manual with warranty information

Features

 7 Days Total Work Out Memory

 Time Display: Hour and Minute

 Support 12 Hour Display Format

 Track Step, Distance and Calculate Calories Burned

 Automatic Memory per 10 Minutes and 144 Ranges Per Day

 Exercise Intensity Reminder Display

 Wireless Pedometer for Bluetooth LE (Bluetooth low energy) Smart Ready Devices

 Water Proof Structure

A Quick Look at Your Device

1. LCD Display Screen

NOTE: Tap on the screen or side = Mode key

2. Battery Compartment

LCD Display

Accessing the Different Modes

You can tap on the mode button (screen or side) on your

pedometer to access the different modes.

 Time Mode: Displays the current time.

 Step Mode: Displays how far you have traveled in

steps.

 Calories Mode: Displays how many calories you have

burned.

 Distance Mode: Displays how far you have traveled.

Front View

Back View

Progress of Completed Target Steps

 The bars shown on the left section of the LCD screen displays progress of completed target steps. There

are 10 bars in total and each stands for 10% of target steps.

 The left bar displays by a target icon. The target icon appears when the sync with your mobile device

has successfully been completed, and if the target goal has been reached, the icon flashes.

 The 9 bars on the right of LCD screen shows exercise intensity, and updates every 5 seconds.

 The following chart displays the definition for each bar as per your steps/minute.

BAR

FREQUENCY (Step/Minute)

< 90

90 ≤ Step < 110

110 ≤ Step < 130

130 ≤ Step < 150

150 ≤ Step < 160

160 ≤ Step < 170

170 ≤ Step < 175

175 ≤ Step < 180

180 ≤ Step

Device Recording and Storage

Your pedometer will automatically start recording intraday data (steps, calorie consumption, distance and

progress of completed target) at 12:00 P.M., and intraday data will be deleted at the same time. After 7 days of

data collection, ‘FULL’ will display on the LCD screen. At this time data should be uploaded, or new data will

replace old data.

Setting up the ProTrack Fitness App

Mobile Device Requirements

Your ProTrack Wireless Activity Tracker can be used as a Bluetooth device, compatible with most

iPhone/iPad/Android phones or tablets which support Bluetooth LE (Bluetooth low energy).

DEVICE REQUIREMENTS

 iPhone with iOS 7 and above

 Android phone with OS 4.3 and above

NOTE

Your Android mobile device, tablet, iPhone, or iPad requires Bluetooth LE (Bluetooth low energy).

Installing the ProTrack Fitness App

Automatically and wirelessly sync your ProTrack Wireless Activity Tracker with your mobile device so you can

view your latest stats, graphs and charts on your smartphone or tablet.

The ProTrack Fitness app can be found on the iOS App store or Google Play store by searching for ‘ProTrack

Fitness’. If you already have installed the ProTrack Fitness application, check for available updates to make

sure you have the latest version.

REMINDER: After installing the ProTrack Fitness App, and before using your ProTrack device for the first time,

make sure to synchronize the time and date of your device to your smartphone/tablet.

Initial Setup and Device Pairing

Your ProTrack Wireless Activity Tracker must be paired directly through the ProTrack Fitness App.

1. Power on your smartphone or tablet. Make sure your smartphone or tablet is set to Bluetooth ‘On’. Check

your mobile device settings if needed.

2. Tap the ProTrack Fitness App from your mobile device to launch the app and begin the initial setup.

3. The ProTrack Fitness App Initial Setup: Start

The ‘Setup Wizard’ appears. Tap Start to personalize your app as well as to pair you device to the app.

4. Personal Data

Enter your personal data:

 Select an image of yourself, enter your name, preferred measure unit, gender and birthday.

Tap Next to continue.

 Enter your height, weight and stride length. Tap Next to continue.

NOTE: All personal data must be entered in order continue to the next screen. To measure your stride

length, walk ten steps, measure the distance in inches and divide by ten.

5. Connect Your Device

Select your device to pair with your smartphone/tablet:

 Make sure your smartphone/tablet has Bluetooth turned on.

 The list of ProTrack Bluetooth devices appears.

 Tap your device to select it.

A Bluetooth icon appears briefly on the device LCD screen once connected.

NOTE: After selecting your device, the time and date of your ProTrack device should now be synched

with your mobile device. Check that the time on your ProTrack device is the same as your mobile device.

 Tap Connect to continue.

6. Setup Your Daily Goals

Enter your personal goals for steps, distance, calories and sleep time.

After entering your daily goals, tap Next to continue the setup.

NOTE: All goal data must be entered in order continue to the next screen.

7. The ProTrack Fitness App: Setup Complete

Tap Finish to complete the setup and begin using your ProTrack Fitness application with your ProTrack

device.

REMINDER: The time and date of your ProTrack device must be synchronized with your smartphone/tablet

before beginning to record your measurements. Once you have completed the initial set up and pairing of your

device, check that the time on your device and the time on your compatible smart phone/tablet are the same. If

they are not, tap Daily Activity from the Home screen to automatically sync the date and time.

Using the ProTrack Fitness App

IMPORTANT NOTE:



In order to maintain sufficient transmission range it is necessary to keep your ProTrack Bluetooth

Pedometer within 30 feet of your phone/tablet. It is recommended to keep your smartphone/tablet in

front of you or in your pocket during use.



If your pedometer is not making a proper Bluetooth connection, check your smartphone/tablet Bluetooth

settings menu.



Reminder: Make sure before your first use of your ProTrack device or after changing the battery, that the

device’s date and time are synched to the date and time on your smartphone/tablet.

Getting Started

1. Make sure your ProTrack Bluetooth activity tracking wristband or belt clip has been placed properly.

Power on your iPhone/Tablet/Android device and launch the ProTrack Fitness app.

2. Once you have completed the initial set up, paired your device and synchronized the time and date as

described in the previous section, the ‘Home’ screen appears.

Note: If you have not paired your device with the app, the Home Screen appears, however the buttons will

be disabled until a device is paired. When you need to pair your device after this point, select Bluetooth

Devices option from the menu. See the ‘Menu> Bluetooth’ section for more details.

3. Tap Daily Activity to open the ‘Daily Activity’ screen.

NOTE:



Options that appear on the ‘Home’ screen which are not available for your selected ProTrack device will be

inactive.

Home Screen

Daily Activity Screen

When you tap Daily Activity from the ‘Home’ screen, the ‘Daily Activity’ Home screen appears. The Daily Activity

counter accumulates daily measurements. These daily measurements can be seen only after connecting and

syncing the data from your ProTrack device.

The following options and information appear on the ‘Daily Activity’ screen:

DAILY ACTIVITY SCREEN: TAB OPTIONS

 Daily Activity Tab: This tab appears automatically highlighted and

indicates that you are viewing the Daily Activity home screen.

 Sleep Activity Tab: Opens the ‘Sleep Monitor’ screen.

NOTE: Not available for the PT-2600.

 Heart Rate Tab: Opens the ‘Heart Rate’ screen when the ProTrack

Heart Rate Monitor device is connected.

NOTE: Not available for the PT-2600.

 Activity Monitor Tab: Opens the controls for recording steps.

NOTE: Not available for the PT-2600.

 Sync Data Tab: Tap the Sync Data tab to sync data from your ProTrack

Pedometer and add saved data to the app.

NOTE: Sync periodically also occurs automatically upon entering the

Daily Activity screen.

NOTE: The tab options that are not available for your selected ProTrack device will be inactive.

Daily Activity Screen

Sync

Data

Tab

DAILY ACTIVITY SCREEN: MEASUREMENT INFORMATION/DATA

Once you have synced data the following measurements are displayed:

 Activity Level Bar: Displays your daily percentage measurement of blended goals.

 Steps Bar: Displays the number of steps, your goal and percentage of achieved goal.

 Distance Bar: Displays daily distance measurement, your goal and percentage of achieved goal.

 Calories Bar: Displays the number of daily calories burned, your goal and percentage of achieved goal.

Navigation Bar

The bottom navigation bar includes tabs that allow you to quickly access the Home screen, your exercise goals,

history and charts.

 Tap the Home tab to enter the Home screen or the previously viewed screen.

 Tap the Goals tab to open the Goals screen that displays the status of your set goals as per the percentage

achieved. You can edit and reset your personal goals through the ‘Goals’ menu option.

 Tap the History tab to display the history of your recorded measurements in the calendar view.

 Tap the Chart tab to display the chart view of your recorded measurements.

Menu Options

Tap the Menu icon on the top right to open the ProTrack Fitness Menu options.

NOTE: Some Android mobile devices include a Menu button. Tap the Android’s Menu button to open the

application’s Menu options.

The Menu includes the following options:

1. Personal Data

The Personal Data menu option allows you to edit your user information: Name, Picture (tap on the picture

to select a photo from your Gallery or take a new photo), Gender (Male/Female), Birthday, Height, Weight,

Stride Length, Unit Measure (Metric or US).

2. Set Goals

The Goals menu option allows you to edit the measurements you would like to achieve for Steps, Distance,

Calories and Sleep time.

3. Bluetooth Devices

The Bluetooth Devices menu option allows you to view all available ProTrack Fitness Bluetooth devices

that are compatible with the ProTrack Fitness app.

 CONNECTED DEVICES

The device that is currently paired appears here along with the connectivity and battery status.

 AVAILABLE DEVICES

Tap Scan to open a list of available ProTrack devices that are detected via Bluetooth.

- Change Device: Select one of the detected devices from the list. You will be prompted to confirm

before the devices are switched. If your device does not appear, make sure your mobile device’s

Bluetooth is set to ON and your ProTrack Fitness device is in Bluetooth discovery mode.

NOTE: If you hadn’t paired up your ProTrack device during the setup you can connect your device via the

Bluetooth Devices menu option.

4. Alarm

NOTE: The Alarm menu option is available only for ProTrack Fitness devices that support this function.

The PT-2600 does not support the Alarm function.

5. Share

Create an account on mapmyfitness.com then log in via the ProTrack Fitness app to upload your daily

activity. Your measurements saved to the app from the previous day will be shared.

6. Help Guide

The Help Guide menu option opens the online help in an external browser.

7. User Manual

The User Manual menu option opens the online User Manual in an external browser.

8. About

The About menu option opens a window with the ProTrack Fitness app copyright and version.

9. Exit

Exits the app.

NOTE: The Exit menu option is applicable only on Android devices.

Viewing the Recorded Data

The data that has been saved can be reviewed from the History, Chart and Goals bottom tabs.

History View

Tap the History tab on the bottom navigation bar to display all historical data taken from your ProTrack device.

The ‘History Calendar’ screen appears. The History calendar allows you to browse through months by tapping

on the  Previous and  Next arrows by the date.

The History calendar also displays different colors for each day as per the

goals that have been achieved. The colors indicate the following:

 Gold: Shows that your goals have been met.

 Silver: Shows that 80% of your goals have been met.

 Red: Shows not enough activity for that day.

History Calendar Screen

DAILY ACTIVITY HISTORY SCREEN

To view the measurements taken on a specific day:

1. Tap a date in the ‘History Calendar’ screen to view the data saved on that day.

2. The ‘Daily Activity History’ screen appears.

3. The measurements taken on the selected day are displayed according to Activity, Steps, Distance and

Calories. The measurements also show your personal goals and the percentages of achieved goals.

4. You can tap the  Previous and  Next arrows by the date to navigate

between days. Tap Back to return to the ‘History Calendar’ screen.

NOTE: Tab options not available for your selected device will be inactive.

Daily Activity History Screen

Chart View

Tap the Chart tab on the bottom navigation bar to display all historical data

taken from your ProTrack device in Chart format.

NOTE: The top tab options not available for your selected ProTrack device will

be inactive.

Daily Activity Chart Screen

1. Tap Daily Activity to view your daily activity history.

The Daily Activity tab is selected by default.

2. You can view your daily activity history according to:

 Activity

 Steps

 Calories

 Distance

Tap one of these options (buttons located below the chart) to view the

selected data in Chart format.

3. You can select to display the Chart according to different time measurements:

 Year: Tap the Year button to open the chart in any specific year divided by months.

 Month: Tap the Month button to open the chart in any specific month divided by days.

 Day: Tap the Day button to open the chart in any specific day divided by hours.

NOTE: Tap and then drag your finger on the screen to activate a reading of that selected date/time. A red line

appears on the chart. Position it at any point and view the data of that date/time that is displayed above the red

line.

Daily Activity Chart Screen

Goals View

To view the status of achieving your daily goals tap the Goals tab on the bottom

navigation bar.

The daily goals view displays the following:

 Activity Level: Daily percentage measurement.

 Steps: Number of steps / Your personal steps goal number / The percentage

of your achieved goal.

 Distance: Daily distance measurement / Daily distance personal goal

number / Percentage of your achieved goal.

 Calories: Number of daily calories / Daily calories personal goal number /

Percentage of your achieved goal.

 Sleep Time: Amount of sleep (hours) / Daily sleep time goal number /

Percentage of your achieved goal.

NOTE: Sleep Time is a standard display for the Goals. Please note that the sleep activity feature it is not

included with the PT-2600, therefore the ‘Goals’ screen will not display achieved data for Sleep Time.

Additional Information

You can access the FAQ (Frequently Asked Questions) and User Manual by tapping the Menu icon in the

ProTrack Fitness application.

1. Tap the Menu icon on the top right to open the list of menu options for the ProTrack Fitness app.

2. Tap Help Guide from the menu options to open the online Help Guide in an external browser.

Then tap ProTrack Fitness FAQs listed on the left side of the Help Guide to view the FAQ details.

3. Tap User Manual from the menu options to open the online User Manual in an external browser.

Goals Screen

Battery Replacement

If after an extended period of use your pedometer starts to become less responsive, it may be time to change

the battery. To do so, follow the steps below:

1. Use a coin or similarly shaped item to help you twist open the battery compartment cover. Turn clockwise

to open.

2. Remove the old battery.

3. Insert a new CR2025 battery with the positive side (+) facing upwards.

4. Make sure the rubber sealing ring is aligned in its groove before closing the battery compartment. Failure

to do so may compromise water resistance.

5. Close the battery compartment cover, turning it in a counter clockwise direction.

NOTE:

When the battery level is below 20%, the Low Voltage " " icon is displayed on the pedometer.

After replacing the battery, the device will return to factory settings. Therefore, you must reset the date and

time of your ProTrack device to be synched with your smart phone/tablet by using the ProTrack application.

To re-set the date and time of your ProTrack device after you have installed the new battery:

Launch the ProTrack application and tap the Daily Activity button to begin the sync.

If you do not sync before using the device, the device measurements will be deleted when you sync.

with the app.

You will lose your measurements if the date and time sync is not done before you begin exercising.

Make sure to check that the time on your device and the time on your compatible phone/tablet are

the same.

Minimum and Maximum Units of Measurement and Ratings

Page is loading ...

Sakar protrack pt-2600 User manual

Brand: Sakar

Model: protrack pt-2600

Category: Activity trackers

Type: User manual

Download PDF

report

Sakar protrack pt-2600 User manual

Sakar protrack pt-2600 User manual

Other documents