Azden SGM-100 Operating instructions

Category
Microphones
Type
Operating instructions

Azden SGM-100 is a professional shotgun microphone designed for videographers and audio professionals. It features a super-cardioid polar pattern, providing excellent directivity and minimizing background noise. The wide frequency response of 80-18,000Hz ensures accurate sound reproduction, making it suitable for capturing clear and natural audio in various situations. The low-cut filter switch allows you to reduce unwanted low frequencies, such as air conditioner noise, for cleaner recordings.

Azden SGM-100 is a professional shotgun microphone designed for videographers and audio professionals. It features a super-cardioid polar pattern, providing excellent directivity and minimizing background noise. The wide frequency response of 80-18,000Hz ensures accurate sound reproduction, making it suitable for capturing clear and natural audio in various situations. The low-cut filter switch allows you to reduce unwanted low frequencies, such as air conditioner noise, for cleaner recordings.

SGM-100
INSTRUCTIONS
PROFESSIONAL SHOTGUN MICROPHONE
Super-Cardioid Polar Pattern
Customers in the North/South America and Europian markets contact:
Azden Corp., 147 New Hyde Park Rd, P.O. Box 10, Franklin Square, NY 11010
voice - 516.328.7500 • fax - 516.328.7506 • email - [email protected]
© 2007 Azden Corporation
P1050-01 012-34291-01
Printed in Japan
Customers in the Asian and Oceania markets contact:
Azden Corp., 1-12-17 Kamirenjaku Mitaka-shi, Tokyo, 181-8533 Japan
voice - 81-1-422-55-5115(Japan) • fax - 81-1-422-55-0131(Japan)
Thank you for purchasing the Azden SGM-100 microphone. Designed for Video and Audio
Professionals, the SGM-100 is a directional super-cardioid shotgun microphone with a wide
frequency response and low noise levels. AZDEN new generation "microphone unit" is used
for higher sound quality.
BATTERY:
The SGM-100 is powered by 1 “AAA” battery (not included). Unscrew the lower half of the short
barrel case just below the “Power” switch by turning it counterclockwise. Install 1 fresh “AAA”
Alkaline battery, making sure to check polarity, and close the case by turning it clockwise. DO
NOT OVERTIGHTEN or you may strip the threads.
SHOCK-MOUNT HOLDER:
The SGM-100 is supplied with a shock-mount holder. This holder can be used on a camera
shoe or on a microphone stand. Push the barrel through the center of the elastic bands until it
is positioned as shown. To secure the holder to a camera shoe, slide the holder into the
camera shoe and tighten the thumbwheel by turning it clockwise. To secure the holder to a
microphone stand, screw the holder to the stand by turning it clockwise until it is tight.
NOTE: Two holes are drilled into the bottom of the holder for different diameter microphone
stand threads, choose the one that matches your mic stand or boom pole
POWER SWITCH:
The SGM-100 has a 2-position power switch.
OFF: Switch the microphone to OFF when not in use to conserve battery life.
ON: Switch the microphone to ON for normal operation.
LOW-CUT SWITCH:
The SGM-100 has a "Low-Cut" filter switch that is designed to reduce unwanted low frequen-
cies from entering the audio. This will reduce low frequency energy created from things like
air conditioner compressors. The frequency response is "Flat" when the switch is in the
position while the low frequencies are reduced when the switch in in the position.
MIC OUTPUT:
WIRELESS OPTIONS:
You can turn the SGM-100 into a wireless microphone by purchasing one of Azden’s unique
XLR plug-in transmitters and matching receiver. For more details contact your Azden dealer or
one of the dealers linked at our website: www.azden.co.jp
SPECIFICATIONS:
FREQUENCY RESPONSE 80-18,000Hz
SENSITIVITY SUPER CARDIOID -33dB re 1V/Pa
IMPEDANCE 1.5k Ohms @ 1KHz
MAX. SPL INPUT LEVEL 110dB
SIGNAL TO NOISE RATIO 70dB
BATTERY TYPE AAA (1.5V) - USE ALKALINE BATTERY
BATTERY CURRENT 0.5 mA
BATTERY LIFE 1000 HOURS w/ALKALINE BATTERY
WEIGHT w/o BATTERY
140grams
DIMENSIONS 310mm length
21mm diameter
OUTPUT TYPE 3-Pin XLR type
SUPPLIED ACCESSORIES SHOCK MOUNT MIC HOLDER
1 WINDSCREEN
Windscreen
Shock Mount Holder
+
-
The SGM-100 has a balanced XLR output and will work in any low impedance microphone
input of 1K ohm or less. Due to the wide variety of possible connections and equipment used
with the SGM-100, an output cable is not supplied.
  • Page 1 1
  • Page 2 2

Azden SGM-100 Operating instructions

Category
Microphones
Type
Operating instructions

Azden SGM-100 is a professional shotgun microphone designed for videographers and audio professionals. It features a super-cardioid polar pattern, providing excellent directivity and minimizing background noise. The wide frequency response of 80-18,000Hz ensures accurate sound reproduction, making it suitable for capturing clear and natural audio in various situations. The low-cut filter switch allows you to reduce unwanted low frequencies, such as air conditioner noise, for cleaner recordings.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI