GETTING STARTED: Getting Started - Continued:
Plug into a power socket.
Press the STANDBY button to start listening to the radio.
Adjust the FM frequency using the PREV/NEXT buttons.
Change the volume using the VOL+/VOL- buttons.
d
Goodmans QSG (2803)_R7 • 24 Jul 2014 • AT
210 x 148 mm
In standby mode, press and hold the TIME-SET button. The
display will begin to flash.
Use the HOUR and MIN buttons to set the correct time. Press the
TIME-SET button to confirm.
Press and hold the AL-1 button. The LED indicator and time will
begin to flash.
Use the HOUR and MIN buttons to set the correct time. Press the
AL-1 button to confirm.
Choose the alarm type (FM or Buzzer) by pressing AL-S
(BU = Buzzer). Press AL-1 to confirm and set.
Press the AL-OFF button to turn o the alarm. To use the snooze
function, press down on the SNOOZE label on the alarm clock
radio. To cancel snooze, press STANDBY.
Setting the time
Setting the alarm