PDP TV
quick start guide
imagine the possibilities
Thank you for purchasing a Samsung product.
To receive a more complete service, please
register your product at
www.samsung.com/global/register
02169A_CMS.indd 1 2009-09-08��1:46:39
1
connections
CONNECTING A CABLE BOX/SATELLITE RECEIVER (SET-TOP BOX)
VIA HDMI
● When connecting an external device, match the colour of the connection terminal to the cable.
Each Cable Box/Satellite receiver (Set-Top Box) has a different back panel confi guration.
1.
Connect an HDMI Cable(Not supplied) between the HDMI IN (1 (DVI), 2, 3 or 4) jack on the TV and the HDMI
jack on the Cable Box/Satellite receiver (Set-Top Box).
➢
No additional Audio connection is needed for an HDMI to HDMI connection.
➢
When using an HDMI/DVI cable connection, you must use the HDMI IN 1(DVI) jack.
Caution
HDMI IN
DVD Player or Cable Box /
Satellite receiver (Set-Top Box)
1
HDMI Cable (Not supplied)
TV REAR PANEL
02169A_CMS.indd 1 2009-09-08��1:46:40
2
CONNECTING A CABLE BOX/SATELLITE RECEIVER (SET-TOP BOX)
VIA DVI
HDMI IN
1.
Connect an HDMI Cable(Not supplied) between the HDMI IN 1(DVI) jack on the TV and the HDMI jack on the
Cable Box/Satellite receiver (Set-Top Box).
2.
Connect Audio Cables(Not supplied) between the PC/DVI AUDIO IN jack on the TV and the Cable Box/Satellite
receiver (Set-Top Box).
➢
When using an HDMI/DVI cable(Not supplied) connection, you must use the HDMI IN 1 jack.
CONNECTING A CABLE BOX/SATELLITE RECEIVER (SET-TOP BOX)
VIA COMPONENT CABLES
1.
Connect a Component Cable(Not supplied) between the COMPONENT IN [Y, PB, PR] jacks on the TV and the
COMPONENT jacks on the Cable Box/Satellite receiver (Set-Top Box).
2.
Connect Audio Cables(Not supplied) between the COMPONENT IN [R-AUDIO-L] jacks on the TV and the AUDIO OUT
jacks on the Cable Box/Satellite receiver (Set-Top Box).
DVD Player or Cable Box /
Satellite receiver (Set-Top Box)
DVD Player or Cable Box /
Satellite receiver (Set-Top Box)
TV REAR PANEL
TV REAR PANEL
2
1
Audio Cable (Not supplied)
HDMI/DVI Cable (Not supplied)
Audio Cable (Not supplied)
Component Cable (Not supplied)
2
1
02169A_CMS.indd 2 2009-09-08��1:46:40
3
Storing Channels Automatically
No sound or picture
Check that the mains lead has been connected to a wall socket. •
Check that you have pressed the button on your set. •
Check the picture contrast and brightness settings. •
Check the volume. •
Check if • Select Speaker is set to External Speaker.
Normal picture but no sound
Check the volume. •
Check whether the •
M
MUTE button has been pressed on the remote control.
No picture or black and white
picture
Adjust the colour settings. •
Check that the broadcast system selected is correct. •
Sound and picture
interference
Try to identify the electrical appliance that is affecting the television, then move it further away. •
Plug the television into a different main socket. •
Blurred or snowy picture,
distorted sound
Check the direction, location and connections of your aerial. •
This interference often occurs due to the use of an indoor aerial.
Remote control malfunctions
Replace the remote control batteries. •
Clean the upper edge of the remote control (transmission window). •
Check that the • + and – ends of the batteries are inserted correctly.
Check that the batteries are drained. •
Screen is black and power
indicator light blinks steadily
On your computer check; Power, Signal Cable. •
Move the computer’s mouse or press any key on the keyboard. •
On your equipment check (STB, DVD, etc) ; Power, Signal Cable. •
The TV is using its power management system. •
Press the Source button on the panel or remote control. •
Turn the TV off and on. •
The damaged picture appears
in the corner of the screen.
If • Screen Fit is selected in some external devices, the damaged picture may appear in the
corner of the screen. This symptom is caused by external devices, not TV.
The “Resets all settings to
the default values” message
appears.
This appears when you press and hold the • EXIT button for a while. The product settings are
reset to the factory defaults.
Troubleshooting
Scans for all channels with active broadcast stations (and availability depends on your
country) and stores them in the TV’s memory.
You can memorize the Antenna source.
Air • : Air antenna signal.
Cable • : Cable antenna signal.
Air+Cable • : Air and Cable antenna signals
If the antenna is connected to ANT 2 IN (CABLE), select N Cable and if it is
connected to ANT 1 IN (AIR), select Air.
If both ANT 1 IN and ANT 2 IN are connected, select the N Air+Cable.
After all the available channels are stored, it starts to remove scrambled channels. N
The Auto program menu then reappears.
If you want to stop Auto Programming, press the N ENTER
E
button.
The Stop Auto Program? message will be displayed. Select Yes by pressing the
◄ or ► button, then press the ENTER
E
button.
Before contacting the Samsung after-sales service, perform the following simple checks. N
If you cannot solve the problem using the instructions below, note the model and serial number of the television and contact
your local dealer.
Antenna :Air
►
AutoProgram
Full Guide
Mini Guide
DefaultGuide :FullGuide
Channel List
Fine Tune
LNA :Off
Channel
02169A_CMS.indd3 2009-09-08��1:46:40
Contact SAMSUNG WORLDWIDE
If you have any questions or comments relating to Samsung products,
please contact the SAMSUNG customer care centre.
CMS
COUNTRY
Customer Care Center
Web Site
ARGENTINE 0800-333-3733 www.samsung.com/ar
BRAZIL
0800-124-421
4004-0000
www.samsung.com/br
CHILE 800-SAMSUNG(726-7864) www.samsung.com/cl
COLOMBIA 01-8000112112 www.samsung.com.co
COSTA RICA 0-800-507-7267 www.samsung.com/latin
ECUADOR 1-800-10-7267 www.samsung.com/latin
EL SALVADOR 800-6225 www.samsung.com/latin
GUATEMALA 1-800-299-0013 www.samsung.com/latin
HONDURAS 800-7919267 www.samsung.com/latin
JAMAICA 1-800-234-7267 www.samsung.com/latin
NICARAGUA 00-1800-5077267 www.samsung.com/latin
PANAMA 800-7267 www.samsung.com/latin
REP. DOMINICA 1-800-751-2676 www.samsung.com/latin
PUERTO RICO 1-800-682-3180 www.samsung.com/latin
TRINIDAD & TOBAGO 1-800-SAMSUNG(726-7864) www.samsung.com/latin
VENEZUELA 0-800-100-5303 www.samsung.com/latin
02169A_CMS.indd4 2009-09-08��1:46:40
/