2. Samsung
  3. WMN4270SH

Samsung WMN4270SH Owner's manual

  • Hello! I am an AI chatbot trained to assist you with the Samsung WMN4270SH Owner's manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
Adjustable Wall Mount User Guide
WMN4270SH
Finished wall mount
1. Do not let children play underneath the product when it is installed. Children may hit their heads against the edge of the product.
2. Take care when you adjust the angle or rotate the product because the back of the product may make contact with the wall.
(You can prevent damage to the product and the wall by attaching sponges to the 4 edges of the product.)
3. Do not install the product in a hot, humid location or on a weak wall that is unable to sustain the weight of the product.
4. Do not insert your hand into the groove at the bottom of the TV while installing the TV onto the wall mount as this may result in an electric shock.
5. Make sure to cover the groove at the bottom of the TV that becomes visible after removing the stand using the separate cover supplied with the TV.
Components
Safety precautions
Please make sure to use the components and parts supplied with the product.
Make sure that an installation engineer specified by your dealer installs the product.
Make sure that an installation engineer specified by your
dealer moves or replaces the product after the installation.
Do not hang onto the installed product and avoid
impacts to the product.
Adjustable mount Bracket
1 EA Left: 1 EA Right: 1 EA
Parts
Plastic hangers
: 4 EA
Screws ⓐ: 8 EA Anchors: 8 EA
Cable tie: 1 EA
Screws ⓑ: 8 EA
Screws ⓒ: 4 EA Washers
M8X35 M8X40 1T 4EA
M8X47 M8X49 2T 2EA
[WMN4270SH]IB_04L02.indb 1 2015-04-09 오전 8:49:16
Installing the wall mount
1
Fix the adjustable mount onto the wall as shown by the figure.
Fix the adjustable mount onto the wall with anchors and
screws ⓐ from ① to ⑦ in this order.
If you cannot fasten the anchors and screws at the specified
positions, fasten them at the nearest possible positions.
2
After firmly fixing the adjustable mount onto the wall as shown
by the figure, pull the adjustable part forward, assemble the
brackets with the adjustable mount as shown by the figure and
fix them by fastening the 8 screws ⓑ supplied with the product.
(The same for left and right)
Check the strength of the wall, and if the wall is insufficiently strong, reinforce the wall before installing the product on the wall.
The screws and anchors supplied with the product are to fix the product onto wood or concrete.
Check the material of the wall and use appropriate fixing screws depending on the type of material such as plaster board,
marble or iron plate.
2
6
4
3
7
5
1
Fixing the anchors and screws ⓐ
When you drill a hole in the wall, make sure to use a drill
bit with the specified diameter. failing to do so may result
in a safety issue.
Drill a hole using a 9X70 drill bit.
Clean the inside of the hole.
Insert the enclosed anchor into the hole.
Align the adjustable mount with the hole
and fasten the screw
ⓐ.
4 screws ⓑ
4 screws ⓑ
[WMN4270SH]IB_04L02.indb 2 2015-04-09 오전 8:49:16
3
Remove the screws from the main body of the TV, assemble the 4 enclosed
plastic hangers and screws ⓒ as shown by the figure and firmly fasten them to
the back of the main body of the TV.
Hang the TV onto the wall mount and make sure to check if the TV has been installed properly onto the wall mount by
observing the assembled TV as you move the wall mount from left to right.
Take care not to hurt your fingers when you install the TV or adjust the wall mount.
Make sure to fix the wall mount onto the wall firmly. If the TV falls, it may result in injury or damage to the product.
4
Pull the wall mount brackets as far forward as possible and hang the TV onto the wall mount at the specified positions as shown
by the figure while 2 persons are holding the TV.
5
Tie the power cord and the other cables with the enclosed cable tie as shown by the figure
and make sure that the cables do not come loose when the wall mount is adjusted.
After connecting the cables and pulling the adjustable mount as far forward as possible,
arrange the cables using the cable tie that has been passed through the specified hole
in the adjustable mount as shown by the figure.
The cable will then not interfere with the wall mount.
Check the operation 2 or 3 times and if there is no problem, fix the wall molding.
You can keep the TV level using the height leveler.
Fix the TV onto the wall mount firmly and
turn the 2 safety catches at the top of the
wall mount brackets to the lock position
as shown by the figure, so that the TV and
the wall mount do not become separated.
[Models before 2013] [Models after 2013]
Use M8X35 and M8X40 screws
ⓒ
Refer to the separate sheet
[For normal models] [For slim models]
[WMN4270SH]IB_04L02.indb 3 2015-04-09 오전 8:49:17
Adjust the angle of the product carefully. Using excessive force
may result in the product hitting the wall and becoming damaged.
Adjust the horizontal angle by holding both sides of the product.
When you adjust the vertical angle, hold the top center of the
product. Then you can smoothly adjust the angle.
You can adjust the angle up to -20° ~ 20° horizontally and up
to 10° ~ 15° vertically. The allowed adjustable angle may differ
depending on the model.
Product specifications
Specifications
The product appearance and specifications are subject to change for product improvement purposes without
prior notice.
Width (mm) 465
Height (mm) 460
Depth (mm) 24.5
Weight (Kg) 5.5
Wall mount VESA specifications 400 X 400
Adjusting the wall mount angle
This product has adopted a Smooth Moving Mechanism so that it always moves very smoothly.
465
240.5 24.5 50
400
346
8
247
394
135
172
212
400
460
[WMN4270SH]IB_04L02.indb 4 2015-04-09 오전 8:49:18
각도 조절 및 회전형 벽걸이 지지대 사용설명서
WMN4270SH
벽걸이 완제품
1. 제품아래에서아이가놀지못하게하세요.모서리에머리가부딪칠수있습니다.
2. 각도조절을하거나회전시에제품의뒷면이벽과부딪칠수있으니주의하세요.
(모서리4곳에스폰지등을부착하면벽과제품이상하는것을방지할수있습니다.)
3. 고온다습한곳이나제품의무게를견디지못하는벽에는설치하지마세요.
4. 감전의위험이있으므로벽걸이설치중에TV제품하단의스탠드분리홈에절대손을넣지마세요.
5. TV제품의스탠드가분리된홈은TV제품에있는별도의덮개를반드시막고벽걸이설치작업을완료하여주세요.
구성품
안전을 위한 주의사항
벽걸이설치시반드시제공되는구성품및부품을사용하여주세요.
제품설치는반드시판매점에서지정한전문설치업자에게의뢰해주세요.
나사ⓒ:4개 와셔
M8X35 M8X40 1T4개
M8X47 M8X49 2T2개
설치후제품을이동하거나교체시에는반드시
판매점에서지정한전문설치업자에게문의하세요.
설치후매달리거나심한충격을주지마세요.
각도 조절 장치 브라켓
1개
왼쪽:1개 오른쪽:1개
부속품
걸이용플라스틱
:4개
나사ⓐ:8개 앵커:8개
와이어고정부품
:1개
나사ⓑ:8개
[WMN4270SH]IB_04L02.indb 5 2015-04-09 오전 8:49:19
벽걸이 설치 방법
1
각도조절장치를그림과같이벽면에고정하십시오.
각도조절장치를앵커와나사ⓐ로그림과같이①번에서
⑦번까지순서대로고정시키세요.
불가피하게지정된위치에고정하지못할경우에는가장
인접한곳으로이동하여고정하세요.
2
그림과같이벽면에본체를단단히고정시킨후에전면으로
당겨서펼쳐진브라켓을각도조절장치의지정한위치에
삽입하여동봉된나사ⓑ8개를이용하여고정하십시오.
(좌/우동일)
벽의강도를확인한후에강도가충분하지못한곳은반드시적절한보강작업을한뒤에설치하세요.
동봉된나사와앵커는목재와콘크리트체결용입니다.
벽을확인하여석고보드,대리석,철판등에는적절한전용체결나사를사용하세요.
2
6
4
3
7
5
1
나사ⓑ4개
나사ⓑ4개
벽에구멍을뚫을때에는반드시지정된직경의드릴
비트및드릴을사용하세요.지정되지않은방법으로
설치할경우에는안전상의문제가발생될수있습니다.
앵커 및 나사ⓐ 고정 방법
9X70의드릴로구멍을뚫으세요.
뚫은구멍을청소하세요.
구멍에동봉된앵커를삽입하세요.
각도조절장치를구멍에맞추어
나사ⓐ를체결하세요.
[WMN4270SH]IB_04L02.indb 6 2015-04-09 오전 8:49:20
3
TV본체의나사를제거한후에,동봉된걸이용플라스틱과나사ⓒ4개를
그림과같이결합하여TV본체뒷면에단단하게조여주세요.
4
그림과같이벽걸이의브라켓고정부를전면으로최대한당긴후에TV본체를반드시두사람이들고벽걸이의지정부위에
걸어주십시오.
5
전원선및기타주변기기연결선의처리는동봉된와이어고정부품을사용하여그림과같이
묶은후에회전및작동시에이탈되거나빠지지않는지확인해주시길바랍니다.
케이블을삽입한후에각도조절장치를전면으로최대한당긴후에와이어를그림과같이
각도조절기의지정한구멍을이용하여정형하게되면회전시에연결선과간섭되지않습니다.
2~3회동안동작확인후,이상이없을시에는벽면몰딩을고정바랍니다.
본체를벽걸이에걸은후에모두정확하게걸렸는지좌,우측면에서필히확인하세요.
설치및각도조절시손가락이끼일수있으니조심하세요.
벽걸이브라켓이벽에단단하게고정되어있지않으면본체가떨어져다칠수있으니단단하게고정하세요.
수평조절장치를이용하여,
TV본체의수평조절이가능합니다.
벽걸이에TV본체를완전히고정한
후에벽걸이양쪽상부2개소의
안전고리를그림과같이회전하여
고정되도록하십시오.
[13년도이전모델] [13년도이후모델]
M8X35,M8X40나사ⓒ사용
별지참조
[일반사용시] [슬림사용시]
[WMN4270SH]IB_04L02.indb 7 2015-04-09 오전 8:49:21
제품의각도를조정할때너무강한힘을주면제품이벽면과
부딪쳐손상을입을수있으니주의하세요.
좌우각도를조정할때에는제품의양옆부분을잡아주고,아래
각도를조정할때에는제품윗면의가운데를잡으면
부드럽게원하는각도로조절할수있습니다.
각도조절은좌/우방향으로-20° ~ 20°까지,아래방향으로10°
~ 15°까지임의로조절할수있습니다.모델에따라
각도조절장치의각도가상이할수있습니다.
제품 사양
제품 규격
제품의외관이나사양등은제품의개량을위해서,사전에예고없이변경될수있습니다.
폭(mm) 465
높이(mm) 460
깊이(mm) 24.5
무게(Kg) 5.5
벽걸이VESA규격 400X400
벽걸이 각도 조절 방법
본제품은소비자의편리성을위해SMOOTHMOVINGMECHANISM을도입하여아주부드럽게움직이도록
설계되어있습니다.
465
240.5 24.5 50
400
346
8
247
394
135
172
212
400
460
[WMN4270SH]IB_04L02.indb 8 2015-04-09 오전 8:49:21
/