Mio MiVue 785 Quick start guide

MiVue 785
Mio
Brand
Mio
Model
MiVue 785
Type
Quick start guide

Mio MiVue 785 is a dash cam that automatically starts recording when the vehicle engine is turned on, and has an event recording feature that is triggered by sudden impact, high-speed driving, an aggressive turn, or an accidental crash. It also has a parking recording feature (with additional power source), a camera mode for taking photos, and a playback mode for reviewing recorded videos. The device comes with a GPS function for tracking location and speed, and can be connected to a computer using a mini-USB connector.

Mio MiVue 785 is a dash cam that automatically starts recording when the vehicle engine is turned on, and has an event recording feature that is triggered by sudden impact, high-speed driving, an aggressive turn, or an accidental crash. It also has a parking recording feature (with additional power source), a camera mode for taking photos, and a playback mode for reviewing recorded videos. The device comes with a GPS function for tracking location and speed, and can be connected to a computer using a mini-USB connector.

Getting to know your dash cam
4
Microphone
5
Touch screen
6
System indicator
7
Shutdown button
1
Mini-USB connector
2
AV-out connector
(for selected models only)
3
Device mount socket
8
Speaker
9
Camera lens
10
Power button
11
Memory card slot
Using your dash cam in a vehicle
Precautions and notices
l
Do not operate the device while driving. Using this product does not change the requirement for
a driver to take full responsibility for his or her behavior. This responsibility includes observing all
trafc rules and regulations in order to avoid accidents, personal injury or property damage.
l
A window mount is needed when using the dash cam in a car. Make sure that you place the dash
cam in an appropriate place, so as not to obstruct the driver’s view or deployment of airbags.
l
Make sure that no object is blocking the camera lens and no reective material is placed near the
lens. Please keep the lens clean.
l
If the car’s windscreen is tinted with a coating, it may impact the recording quality.
l
To ensure the highest quality recordings, you are advised to place the dash cam near the rear
view mirror.
l
Select an appropriate location for mounting the device in a vehicle. Never place the device where
the driver’s eld of vision is blocked.
l
If the car’s windscreen is tinted with a reective coating, it may be athermic and impact the GPS
reception. In this instance, please mount your device where there is a “clear area.”
l
The system will automatically calibrate the G sensor of the device during start-up. To avoid
G sensor malfunction, always turn the device on AFTER you mount it in the vehicle properly.
Make sure that your car is parked on level ground. Follow the instructions to securely mount your dash
cam in a vehicle.
1. Mount the dash cam.
2. Adjust the lens angle.
3. Connect the cables.
TM
TM
785
Quick Start Guide
5 6 1 5 N 5 6 8 0 0 1 2 R 0 0
Inserting a memory card
The dash cam supports the Class 10 memory cards with 8 GB – 128 GB capacity.
Hold the card (MicroSD) by the edges and gently insert it into the slot as shown in
the illustration. To remove a card, gently push the top edge of the card inwards to
release it and pull it out of the slot.
Formatting a card
To format a memory card (all data will be erased), tap > > .
2
1
2
3
Turning the dash cam ON
Once the vehicle engine is started, the dash cam automatically turns on.
Press and hold the Power button for 2 seconds to manually turn the dash cam on and off. When the
dash cam is turned on, press the power button to switch the LCD screen on and off.
Recording
Continuous recording
By default, the system will automatically start continuous recording in few seconds after start-up.
Event recording
By default, if an event happens such as sudden impact, high-speed driving, an aggressive turn or an
accidental crash during continuous recording, the G sensor will prompt the dash cam to start an event
recording.
If you want to manually start an event recording while continuous recording is in progress, tap on
the recording screen.
Parking recording
Note: This feature is not available for all models.
You must use an additional power source to record the video during Parking mode, such as Mio Smart
Box uninterruptible power cable which is sold separately.
Enable parking recording by tapping > > > > .
Camera mode
l
If the recording is in progress, tap to take a photo. (This function is not available when the rear
camera is connected.)
l
Tap > > .
Playback mode
1. Tap > .
2. Select the desired type.
3. Tap the desired le to start playback.
System settings
Note: Not all setting items and options are available for all models.
To customise the system settings, tap > > .
MiVue Manager
MiVue Manager™ is a tool for you to view the videos recorded on a MiVue dash cam. Download
MiVue Manager from the Support page of Mio™ website (www.mio.com/support) and follow the on-
screen prompts to install it.
For more information
Depending on the specic model purchased, the colour and look of your device and accessories may
not exactly match the graphics shown in this document. You can download the latest User Manual of
your product from Mio website (www.mio.com).
Not all models are available in all regions.
Specications and documents are subject to change without notice. MiTAC does not warrant this
document is error-free. MiTAC assumes no liability for damage incurred directly or indirectly from
errors, omissions or discrepancies between the device and the documents.
About GPS
l
GPS is operated by the United States government, which is solely responsible for the performance
of GPS. Any change to the GPS system can affect the accuracy of all GPS equipment.
l
GPS satellite signals cannot pass through solid materials (except glass). When you are inside a
tunnel or building, GPS positioning is not available. Signal reception can be affected by situations
such as bad weather or dense overhead obstacles (e.g. trees, tunnels, viaducts and tall buildings).
l
The GPS positioning data is for reference only.
Declaration of conformity
For regulatory identication purposes, MiVue 785 is assigned a model number of N568. Hereby,
MiTAC declares that this N568 is in compliance with the essential requirements and other relevant
provisions of Directive 2014/53/EU.
Visit Mio website (www.mio.com) for the full text of the declaration for your device.
WEEE
This product must not be disposed of as normal household waste, in accordance with the
EU directive for waste electrical and electronic equipment (WEEE – 2012/19/EU). Instead,
it should be disposed of by returning it to the point of sale, or to a municipal recycling
collection point.
Revision: R00
(10/2017)
  • Page 1 1
  • Page 2 2

Mio MiVue 785 Quick start guide

MiVue 785
Mio
Brand
Mio
Model
MiVue 785
Type
Quick start guide

Mio MiVue 785 is a dash cam that automatically starts recording when the vehicle engine is turned on, and has an event recording feature that is triggered by sudden impact, high-speed driving, an aggressive turn, or an accidental crash. It also has a parking recording feature (with additional power source), a camera mode for taking photos, and a playback mode for reviewing recorded videos. The device comes with a GPS function for tracking location and speed, and can be connected to a computer using a mini-USB connector.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents