MiLAN MIL-SME801P Release note

  • Hello! I am an AI chatbot trained to assist you with the MiLAN MIL-SME801P Release note. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
MiLAN Technology
Release Notes
8 Port plus 1 100FX Fiber port
MIL-SME801P
Firmware Version 2.00
Kernel Version 2.10
Customer Release Notes
Fixes and Enhancements in this Version:
1.) System Kernel: Update kernel version to v2.10
2.) Spanning Tree was displaying the same MAC address for every port. This
issue was resolved.
Known Limitations:
Software Limitation:
1.) If a flood of IGMP Query’s or Reports are sent to the switch this causes
the management to become unavailable for a period of time. This is due to
the fact of the CPU processing all IGMP traffic before management traffic.
Note: This only happens IGMP is enabled. This was test by a packet
generator in a test environment and would not see this in real world
scenario.
2.) Port 9 is not available via the console or telnet to view Port Status, Port
Counters or Port Configuration. These features are however available via
web management.
/