Eaton ETN-ENC422442SB Datasheet

Brand: Eaton

Model: ETN-ENC422442SB

Category: Racks

Type: Datasheet

Designed for small and

medium-sized businesses,

the Eaton S-Series

Rack with rack hygiene

supports and optimizes IT

equipment. These standard

configured racks are

scalable and integrate an

array of options including

cable management, power

distribution and backup

power to provide a full

network solution.

Features

• Enhanced frame ensures zero leakage around

the front perimeter and also features oval

grommets in front frame verticals for cable

pass-thru between racks.

• High flow single front door with 75 percent open

perforation pattern

• High flow split rear door with 75 percent open

perforation pattern

• Top panel with two six inch wide brushed openings

for cable egress

• Standard models available with side or divider panels

• 19 inch EIA-310 vertical mounting rails (quantity four)

with U-markings

• Vertical blanking panels (quantity two) with cable pass-

thru for 30 inch wide models only

• Integrated cable trough for overhead cable distribution

• Grounding pre-installed

• Color: Black

Eaton.com/S-Series

Eaton S-Series Rack

Unmatched reliability and service for your critical IT electronics and servers

To interact with the Eaton S-Series

rack, please visit Eaton.com/S-Series

Eaton Corporation

Electrical Sector

8609 Six Forks Road

Raleigh, NC 27615

800-356-5794

Eaton.com/powerquality

Publication No. ITRACK03FXA/0512

EATON S-SERIES RACKS

Catalog Number Configuration Height U Width, in Depth, in Approx. Unit

Weight, lb

Casters

ETN-ENC422442SB With side panels (2) 42 24 42 367 Yes

ETN-ENC422442S With divider panel (1) 42 24 42 309 Yes

ETN-ENC423042S With divider panel (1) 42 30 42 351 Yes

ETN-ENC422448S With divider panel (1) 42 24 48 321 Yes

ETN-ENC423048S

With divider panel (1) 42 30 48 364 Yes

ETN-ENC422442SE Without panels and doors 42 24 42 171 No

ETN-ENC482442S With divider panel (1) 48 24 42 336 Yes

ETN-ENC483042S With divider panel (1) 48 30 42 380 Yes

ETN-ENC482448S With divider panel (1) 48 24 48 350 Yes

ETN-ENC483048S With divider panel (1) 48 30 48 394 Yes

SOLID SIDE PANELS

Catalog Number Height Width

ETN-ACC4842SP 48U 42"

ETN-ACC4848SP 48U 48"

ETN-ACC4242SP 42U 42"

ETN-ACC4248SP 42U 48"

* For a complete listing of available accessories, please

visit Eaton.com/S-Series and click on the options tab.

Standard feature Optional accessories*

Optional accessories*

Cable management

Accomodates large cable

quantities and provides

unmatched rack-to-rack,

raised floor, and overhead

cable access.

Solid side panel

A solid side panel kit (qty.

1) is available to further

enclose your rack where

end-of-row or single-rack

aesthetics are necessary.

Cable rings

Allows for vertical cable

management with flexible

mounting to multiple points.

Floor grommet

Allows maximum pressure

to be maintained in the

sub-floor plenum when

cables are installed.

Lacing bars

Flexible management bar

for attaching/mounting

cables and power strips.

Blanking panels

Tool-less plastic blanking

panels prevent air

recirculation.

Lifetime warranty

Eaton S-Series racks are backed

by a limited lifetime warranty.

Eaton ETN-ENC422442SB Datasheet

Brand: Eaton

Model: ETN-ENC422442SB

Category: Racks

Type: Datasheet

Download PDF

report

Eaton ETN-ENC422442SB Datasheet

Eaton ETN-ENC422442SB Datasheet

Related papers

Other documents