iStarUSA DAGE420U40-5MS Datasheet

Category
Disk arrays
Type
Datasheet
dAGE420U40-5MS
4U 20-bay SATA/SAS miniSAS SFF8088 JBOD Chassis 500W PSU
Power on/o
Fan status indicator
Mute alarm reset
Hot swappable drive bays
Air ow ventilation
Supports Up to 20 SAS/ SATA I/II (1.5/3 Gbps) HDDs
5 x Mini SAS (SFF8088) Interface for Easy Connection
120mm x 1 Cooling Fan for Ventilation
Mini SAS Backplane
LED Indicators for Power and Activity on Each HDD Tray
Power and Alarm Reset Switch
Optional Redundant Power Supply
Specication
Optional Accesories
Learn More
727 Phillips Drive, City of Industry, CA 91748 l www.istarusa.com l [email protected] l 626.303.8885
Features
Introduction
dAGE420U40-5MS is an external 4U-20 Bay Hot-Swap SATA/SAS
rackmount disk array storage chassis. It provides users a most big
storage capacity for up to 20 SATA/SAS drives for all the RAID
conguration. This 4U-20 Bay external SATA/SAS JBOD is designed
with 5 high quality miniSAS (SFF8088) connectors. One side
120mm ball bearing fan oers an enhanced thermal cooling
solution for keeping the equipment from heat damage.
dAGE420U40-5MS provides maximum storage and performance to
high density storage system.
cAGE-AAMMM1- External mini SAS to external mini SAS cable.
cAGE-AAMMI-H- Internal mini SAS cable
zAGE-H-8788-DU- Dual mini SAS x4 host adapter
zAGE-H-8788-QU- Quad mini SAS x4 host adapter
zAGE-H-8788-SI- Mini SAS x4 host adapter
* Specication is subject to change without notice
Model Number dAGE420U40-5MS
RoHS Compliance Yes
Host Interface 5 miniSAS (SFF8088)
LED Display LED for Power On/Off
Power Supply 750W, Input: 100 to 240 Vac Full Range
Material Heavy-Duty Cold-Roll Steel
Material of Main Chassis Zinc-Plated with Bright Chromate
Cooling 1 x 120 mm Cooling Fans
Dimensions (W x H x D) 19 x 7 x 20.8 inch
PS/2 power supply
miniSAS Connectors (SFF8088)
mini SAS backplane
120mm cooling fan
  • Page 1 1

iStarUSA DAGE420U40-5MS Datasheet

Category
Disk arrays
Type
Datasheet

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI