CyberData Corporation 3 Justin Court, Monterey, CA 93940 831.373.2601 Fax: 831.373.4193 www.cyberdata.net
The IP Endpoint Company
Conduit Speaker Mount
The IP Endpoint Company
The Conduit Speaker Mount is the newest option for installation of the
CyberData VoIP Ceiling Speaker. Made of electro-galvanized steel,
the easy-to-install cylindrical design gives the finished look of the
mount and speaker a clear and modern appearance.
Ordering information:
When ordering one of the following:
VoIP V2 Ceiling Speaker (PN: 011098, 011099)
VoIP Singlewire-enabled Ceiling Speaker (PN: 011102, 011103)
Auxiliary Speaker, Analog (PN: 011120, 011121)
Please specify all of these items by their part number.
Features:
Easy to install
Galvanized steel construction
RoHS compliant
Part number: 011039
Two years warranty
Specifications
Boxed Weight
3.3 lbs.
Part Number
011039
CyberData Corporation 3 Justin Court, Monterey, CA 93940 831.373.2601 Fax: 831.373.4193 www.cyberdata.net
Conduit Speaker Mount
930422A/110908
Installation
1/2" Conduit
Network Cable
1/2" Set Screw
Connector
611056B
011021B, 011022A
& Plastic Anchor
Sheet Metal Screw
(4 Pieces Each)
Mounting Screw
(3 Pieces)
071006A
Accessory Kit
RJ-45
Connector
Terminate after
Network Cable
Pass Through
1/2" Set Screw Connector
Connector
1/2" Set Screw
Part of
Nut,
Network Cable
Tighten Screw
to Secure
1/2" Conduit
Knockout (KO)
Pry & Remove
(KO)
(KO)
(KO)
Comes with
Accessory Kit
121001A
or
011127A (As Shown)
-
1
-
2
