Page is loading ...
Model 85-203
AIR CONTROL UNIT
(Used only to regulate fluid pressure in pressure tank)
OPERATION:
To increase pressure on the fluid, turn regula-
tor knob CLOCKWISE. To decrease pressure
on the fluid, turn regulator knob COUNTER-
CLOCKWISE.
MAINTENANCE:
Occasionally remove the bottom plug on the
back side of the regulator to clean the valve
seat and body. (Reference Part Sheet 77-2781.)
PARTS LIST
(When ordering, please specify Part No.)
ITEM PART
NO. PART NO. DESCRIPTION QTY. SHEET
1 72-55 ADAPTER ............................................. 1
2 72-84040 BALL VALVE ......................................... 1 77-2806
3 HAR-511 REGULATOR,
5-PORT ............................ 1 77-2781
PIPE PLUG,
1/4" NPT
(INCL. WITH REGULATOR)
... 1
(INCL. WITH REGULATOR)................................
4 83-1290* GAUGE,
150 PSI .................................... 1
5 72-83030 BALL VALVE ......................................... 1 77-2806
6 86-8 VALVE .................................................. 1
7 83-2675 BODY ................................................... 1
8 TIA-5110 POP OFF VAVLE,
110PSI ....................... 1
9 SSP-1917-NI STREET ELBOW .................................... 1
10 83-1512 NUT ...................................................... 1
*For replacement glass lens order 83-2052
NOTE
To rapidly vent the tank, open stem (6).
1/12 ©2012 Binks All rights reserved. Printed in U.S.A.
U.S.A./Canada Customer Service
195 Internationale Blvd.
Glendale Heights, IL 60139
630-237-5000
Toll Free Customer Service
and Technical Support
800-992-4657
Toll Free Fax
888-246-5732
Binks Sales and Service: www.binks.com
WARRANTY
This product is covered by Binks’ 1 Year Limited Warranty.
77-1827R-6 Revisions: Revised diagram and text.
CA PROP
65
PROP 65 WARNING
WARNING: This product contains chemicals known
to the State of California to cause cancer and
birth defects or other reproductive harm.
/
