Zebra EP10 Owner's manual

Type
Owner's manual

Zebra EP10

The Zebra EP10 is a rugged and versatile enterprise handheld computer designed to handle the demands of mobile workforces. With its sleek and ergonomic design, the EP10 offers a comfortable grip and easy one-handed operation. Here are some of the key capabilities of the Zebra EP10:

• USB & Charger Snap Module (Model No. RV4001): This snap module provides ports to connect a micro-USB cable and a power cable to the EP10, allowing for easy charging and data transfer.

• DB9 RS-232 & charger Snap Module (Model No. RV4002): This snap module provides an RS-232 connection and a power cable connection to the EP10, enabling communication with legacy devices and charging.

Zebra EP10

The Zebra EP10 is a rugged and versatile enterprise handheld computer designed to handle the demands of mobile workforces. With its sleek and ergonomic design, the EP10 offers a comfortable grip and easy one-handed operation. Here are some of the key capabilities of the Zebra EP10:

• USB & Charger Snap Module (Model No. RV4001): This snap module provides ports to connect a micro-USB cable and a power cable to the EP10, allowing for easy charging and data transfer.

• DB9 RS-232 & charger Snap Module (Model No. RV4002): This snap module provides an RS-232 connection and a power cable connection to the EP10, enabling communication with legacy devices and charging.

Two variants of the EP10 snap module are available:
USB & Charger Snap Module (Model No. RV4001) provides ports to connect a micro-USB cable and a power cable to
the EP10, and
DB9 RS-232 & charger Snap Module (Model No. RV4002) provides an RS-232 connection and a power cable
connection to the EP10.
Please review the points listed below before using your EP10 snap module.
Make certain that the logo on the snap module is front-facing when attaching it to the EP10.
A pop-up window is displayed on the EP10 when the hand-held is properly seated in the snap module.
Use only the universal AC power adaptor approved by Psion Inc. for the snap module – Model Number PS1050-G1.
The micro-USB variant USB connector supports USB On-The-Go.
The current version of the RS-232 snap module, identified through the serial number label containing 'C3 ' or higher,
has +5V power on pin 9. The previous version of the RS-232 snap module (with serial numbers lower than 'C3') has
RI (Ring Indicator) on pin 9.
Two variants of the EP10 snap module are available:
USB & Charger Snap Module (Model No. RV4001) provides ports to connect a micro-USB cable and a power cable to
the EP10, and
DB9 RS-232 & charger Snap Module (Model No. RV4002) provides an RS-232 connection and a power cable connec-
tion to the EP10.
Please review the points listed below before using your EP10 snap module.
Make certain that the logo on the snap module is front-facing when attaching it to the EP10.
A pop-up window is displayed on the EP10 when the hand-held is properly seated in the snap module.
Use only the universal AC power adaptor approved by Psion Inc. for the snap module – Model Number PS1050-G1.
The micro-USB variant USB connector supports USB On-The-Go.
The current version of the RS-232 snap module, identified through the serial number label containing 'C3' or higher,
has +5V power on pin 9. The previous version of the RS-232 snap module (with serial numbers lower than 'C3') has
RI (Ring Indicator) on pin 9.
COMPANY HEADQUARTERS SUPPORT SERVICES
Psion Inc. For local support services, go to:
2100 Meadowvale Boulevard, Mississauga http://www.psion.com/service-and-support.htm
Ontario, Canada L5N 7J9
Tel: +1 905 813 9900
January 17, 2013
Fax: +1 905 812 6300 8000245 Rev. B Sheet 1 of 1
COMPANY HEADQUARTERS SUPPORT SERVICES
Psion Inc. For local support services, go to:
2100 Meadowvale Boulevard, Mississauga http://www.psion.com/service-and-support.htm
Ontario, Canada L5N 7J9
Tel: +1 90 5 8 1 3 9900
January 17, 2013
Fax: +1 905 812 6300 8000245 Rev. B Sheet 1 of 1
EP10™ SNAP MODULE INFORMATION
EP10™ SNAP MODULE INFORMATION
  • Page 1 1

Zebra EP10 Owner's manual

Type
Owner's manual

Zebra EP10

The Zebra EP10 is a rugged and versatile enterprise handheld computer designed to handle the demands of mobile workforces. With its sleek and ergonomic design, the EP10 offers a comfortable grip and easy one-handed operation. Here are some of the key capabilities of the Zebra EP10:

• USB & Charger Snap Module (Model No. RV4001): This snap module provides ports to connect a micro-USB cable and a power cable to the EP10, allowing for easy charging and data transfer.

• DB9 RS-232 & charger Snap Module (Model No. RV4002): This snap module provides an RS-232 connection and a power cable connection to the EP10, enabling communication with legacy devices and charging.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI