Installation Instructions
Square Deck Sconce | Item No. 1524
Start Here
HINKLEY LIGHTING 33000 Pin Oak Parkway Avon Lake, OH 44012 (p)800.442.5539 / (f) 440.653.5555 www.hinkleylighting.com
Mounting
Assembly
1. Wire the xture according to the transformer instructions.
2. Install the bulb, if applicable.
3. Slide the cover onto the mounting plate.
Unpacking
1. Unpack the xture from the box.
2. Remove the mounting plate from the back of the xture.
1. Tape template in location where xture is to be mounted.
Make sure the template is straight.
2. Using a 3/32” diameter drill. Drill two holes at places
indicated.
3. Use 3/4“ #8 pan head wood screws (supplied) to screw
the mounting plate onto the mounting surface.
Mounting Template
Drill a 3/32”
hole here
Drill a 3/32”
hole here
Cover
Mounting Plate
Page is loading ...
/
