Page is loading ...
The Gardner Bender Ultra Brutus™ 10,000 lb. Puller
has an innovative design that features a 1 person
set-up in under 2 minutes!
2
M I N
40
*
M I N
The
Other
Brand
* Calculated from 2 people, 20 minutes each
Above information based on actual test results received
by measuring pulling force and amperage draw.
n Folds to 61" L x 28" W x 39" H
n Product weight 385 lbs.
Requires No Assembly
Space Saving Design
Above information based on actual test results received
by measuring pulling force and amperage draw.
n 1.7 HP motor
– Provides constant pull
speed through bends
n Non-reversing planetary gears
– Capstan will not reverse
and allow pulled cable
to return
n Motor and gearing is designed
specifically for heavy-duty
cable pulling application
CP10K motor provides consistently strong pulling
power at less amperage, which adds durability and a
steady pull speed.
LOAD CELL READING VS. MOTOR CURRENT
0.0 5.0 10.0 15.0 20.0 25.0 30.0
Motor Current (Amps)
Pulling Force (Lbs)
CP10K
Competitor A
Competitor B
10,000 lb. Cable Puller
FASTER. EASIER. SAFER.FASTER. EASIER. SAFER.
MADE IN
1 PERSON.
2 MINUTES.
DONE.
FAST 1 PERSON SET-UP
Flip booms into
position and lock
2
Place into conduit
4
Pump main boom to 30°
1
Align with conduit,
properly adjust booms
3
www.gardnerbender.com | PO Box 3241 Milwaukee, WI 53201-3241 | 414.352.4160 | fax 414.352.2377
6615 Ordan Drive | Mississauga, Ontario L5T 1X2 | 905.564.5749 | fax 905.564.0305
B-0042 | September 2009
Unmatched Power
50
years
1959
2009
10,000 lb. Cable Puller
MADE IN
10,000 lb. pulling
capacity
6
n Non-reversing
planetary
gear motor
for consistent
pulling power up
to 10,000 lbs.
Extended boom
2
n Allows 12'
of cable to
be pulled
from the
conduit to
the capstan
Assisted boom lift
5
n Set-up in 2 minutes
with 1 person
n Designed for
optimal safety
n Adjust boom to
any angle
1
2
3
4
5
6
7
5 conduit adapters
1
n 2" - 4" adapters
stored
conveniently
onboard
n Doesn’t need
to be fastened
to conduit
Quick toolless angle
adjustment
3
n Spring loaded
pin reduces risk
of loss
n Faster positioning
saves time
n Adjusts up to 300°
Easily change pulling
direction
4
n Only requires
one person
n Doesn’t require
disassembly
n Speeds up and
simplifies set-up
n Safer for the user
n No tools required
Swiveling casters
7
n Moves easily
on dirt and
gravel
No assembly required
n No loose
parts
n No tools
required
n Includes
footswitch
It’s tough out there. Shouldn’t your cable puller be ready to work when you are?
It will be, with the new Ultra Brutus™ 10,000 lb. Cable Puller from Gardner Bender
®
. Right away,
you’ll understand why it’s the fastest, strongest, most operator-friendly puller on the market today:
FASTER. EASIER. SAFER.
Fast easy set-up. Flexible single-person design. No assembly required.
Created with optimum safety in mind. Mobile and portable.
Why waste additional man hours assembling, adjusting, dis-assembling and dragging your cable puller
from different locations on the jobsite? Let the Ultra Brutus™ help you work faster, easier, and safer.
www.gardnerbender.com/ultrabrutus
/
