Ledpax Technology LPGDP1 Installation guide

Brand: Ledpax Technology

Model: LPGDP1

Type: Installation guide

110V PENDANT LAMP

LPGDP1

Please read instructions before

Commencing installation and retain

for future reference.

SPECIFICATIONS:

1.Fitting:Glass body.

2.Bulb:E26 60W.

3.Protection against electric shock:

CLASS I.

4.Ingress Protection:IP20.

5.Ambient temperature range:-40C

to+45C.

INSTALLATION INSTRUCTIONS:

Electrical products can cause

death,injury,or damage to

property.Installation of this product

must be carried out by a

qualified electrician.On completion

of installation,ensure that the

Certificate of Compliance is updated.

1.Ensure mains supply is switched

off.

2.Insete fixing screw(1)into mounting

box.Connected the wire in the lamp and the

wire from the ceiling by wire connector.

Fix the two earth wires connected by green

screw.

sure all connections are tight.

3.Fit ceiling box onto mounting

bracket with the head screws(2-2).

4.Fix the glass lampshade onto the

lamp holder with the screw ring.

Assemble the bulb.

5.Reconnect power.

WARNING:

Indoor use only,not for outdoor use.

LEDPAX

3

1

2-2

2-1

STEP 2

STEP 1

STEP 3

1

Ledpax Technology LPGDP1 Installation guide

Brand: Ledpax Technology

Model: LPGDP1

Type: Installation guide

Other documents