Kingsman Hardware ARL-KR2118, ARL-KR2213VL, ARL-KR2319 User manual

  • Hello! I am an AI chatbot trained to assist you with the Kingsman Hardware ARL-KR2118 User manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
Installation Guideline for Stone Resin Series Vessel Bathroom Vanity
Things you will need:
1. Vessel Sink 2. Plumber Putty 3.Drain Hardware 4. Silicone Caulk
Vessel sinks are supported directly by the countertop, Rest the sink on the predrilled
drain hole in your countertop. Align the vessel drain hole facing directly downward.
Caulk the edges of the sink hole. From beneath the countertop, use silicone caulk to
seal the seam between the vessel sink and the edges of the countertop hole. This will
keep moisture from dripping down.
Separate the drain body from the rest of the assembly. Since each vessel sink is
different, check the manual that came with your sink to keep track of how the washers,
nuts and O-rings fit on the assembly.
Slide the drain body down into the sink’s drain hole. If the vessel sink instructions require
it, apply a bead of plumber’s putty around the fitting and press it firmly into place.
From underneath the vessel sink, reattach the rest of the washers and other assembly
hardware to the drain body, protruding from the drain hole. Check the vessel sink
instructions to be sure you assemble everything properly.
Attach P-Trap. Depending on your vessel sink design, you may be using a custom P-
trap and drain fittings. Otherwise, you can attach the drain assembly to the existing P-
trap, hand-tightening the connections.
Release the stop valves for the hot and cold water and test the sink faucet.
Contact information: by email at info@contempolivinginc.com or by phone toll free from
Monday through Friday (except on holidays) from 9 am through 4 pm at 888-413-0171
_________________________________________________________________________
Care and Maintenance
Clean regularly with normal detergent and warm water.
Always make a habit of drying your sink after use and buffing with a soft cloth.
This will ensure that no buildup of lime scale or other mineral deposits can occur.
Clean the sink once a week using a nonabrasive cleanser such as Comet and a
clean soft sponge Scrub in the same direction as the natural grain of the sink.
Never let soap or other household cleaners to dry on the surface of the sink. Most
products contain additives which will affect the finish of the sink.
Never use a steel wool pad to clean your sink. Doing so may damage the sink's
surface and cause discoloration.
Minor scratching of the sink's surface is extremely difficult to avoid and is not
something to be unduly concerned about. These marks are usually only superficial
and can be removed with a proprietary stainless steel cleaner.
__________________________________________________________________________
LIMITED LIFETIME WARRANTY
This product has been manufactured and
inspected to the highest possible quality
standards.
Should you experience any defects in
materials or workmanship within the
warranty period, we will repair or replace
the defective product, subject to the
following conditions:
Any claim made under this warranty must
include a copy of a valid proof of
purchase showing the date and place of
purchase.
Our obligation under this warranty is to the
original purchaser only, and may not be
transferred.
Product replacement does not include shipping
costs or labor installation costs.
This warranty relates to defects in manufacture,
materials or workmanship in a sink supplied for
installation into domestic premises in the United
States. It does not extend to Damage resulting
from failure to maintain the product in
accordance with the Care and Maintenance
instructions in this manual.
Normal wear and tear, scratches or
accidental damage.
Faults arising from improper use and/or
installation.
Defects in accessories, strainers and rinse grids.
All incidental or consequential damages are
specifically excluded. No additional warranties,
express or implied are given, including but not
limited to, any implied warranty of
merchantability or fitness for a particular
purpose.
/