by St. Simons, Inc.
Quality Solid Brass Decorative Hardware & Bath Accessories
“The Special Finishes Specialist”
idhbrass.com
Installation Instructions
Premium Grade Solid Brass
Security Guard with Ball End
Item# 28062
Dimensions:
• Base: 2-1/2” x 1”
• Base Weight: 2.5 oz.
• Arm: 5”
• Arm Weight: 4 oz.
• Total Weight: 6.5 oz.
Dimensions are for reference use only.
For exact dimensions, please measure actual part.
Installation Instructions:
1. Position the larger part of the door frame and the
smaller part (with ball) on the door edge.
2. Make sure both parts are level and edges are parallel
to one another.
3. Mark and drill pilot holes.
4. Install with the screws provided.
Maintenance: To maintain the brilliance of the brass finish,
this product has a protective, clear lacquer coating. Clean
only with a soft cloth and mild soap. DO NOT USE brass
cleaner or abrasive materials.
Catalog Section: B
Security Guard with Ball End
Item# 28062
Date: Rev 01/18
/
