Unbranded 28062-003 Installation guide

by St. Simons, Inc.

Quality Solid Brass Decorative Hardware & Bath Accessories

“The Special Finishes Specialist”



idhbrass.com

Installation Instructions

Premium Grade Solid Brass

Security Guard with Ball End

Item# 28062

Dimensions:

• Base: 2-1/2” x 1”

• Base Weight: 2.5 oz.

• Arm: 5”

• Arm Weight: 4 oz.

• Total Weight: 6.5 oz.

Dimensions are for reference use only.

For exact dimensions, please measure actual part.

Installation Instructions:

1. Position the larger part of the door frame and the

smaller part (with ball) on the door edge.

2. Make sure both parts are level and edges are parallel

to one another.

3. Mark and drill pilot holes.

4. Install with the screws provided.

Maintenance: To maintain the brilliance of the brass finish,

this product has a protective, clear lacquer coating. Clean

only with a soft cloth and mild soap. DO NOT USE brass

cleaner or abrasive materials.

Catalog Section: B

Security Guard with Ball End

Item# 28062

Date: Rev 01/18

This manual is also suitable for

Download PDF