MGP BEE-60S Installation guide

BEE-60S

Bamboo Edging Assembly

1-800-574-7248

www.mastergardenproducts.com

Unpack your Bamboo Edging and it

should look like the following image:

Place the Bamboo Edging in the area you

wish for it to stand. Once it is standing, use

2 wooden stakes (stakes not included with

purchase) and hammer them into the

ground next to each end of the Bamboo

Edging.

Once the stakes are hammered in, use a

wire, string, or large zip tie to tie the stakes

and Bamboo Edging together. This will

keep the Bamboo Edging from moving

around or falling. Example and final look

shown below.