SECO-LARM E-931ACC-BLS6Q Owner's manual

Category
Wall & ceiling mounts accessories
Type
Owner's manual

This manual is also suitable for

SECO-LARM E-931ACC-BLS6Q is a flush mount bracket compatible with sensors E-931-S35RRQ and E-931-S45RRQ. It allows for a quick and easy installation of these sensors, providing a secure and stable mounting solution. The bracket is designed to be mounted flush against a wall or surface, making it suitable for various indoor and outdoor applications. The package includes all necessary hardware for installation, including wall plate screws, bracket screws, and lock washers.

SECO-LARM E-931ACC-BLS6Q is a flush mount bracket compatible with sensors E-931-S35RRQ and E-931-S45RRQ. It allows for a quick and easy installation of these sensors, providing a secure and stable mounting solution. The bracket is designed to be mounted flush against a wall or surface, making it suitable for various indoor and outdoor applications. The package includes all necessary hardware for installation, including wall plate screws, bracket screws, and lock washers.

E-931ACC-BLS6Q
Flush Mount Bracket
E-931ACC-BLS7Q
Wall Bracket
Compatible with Sensors E-931-S35RRQ and E-931-S45RRQ
Manual
Sensor E-931-S35RRQ Shown
Parts List - Flush Mount Bracket E-931ACC-BLS6Q
Wall Plate
1x
Bracket Screw and Lock Washer
L-Bracket
2x
Wall Plate Screws
STEP 1
STEP 2
Note: Sensor E-931-S45RRQ
uses upper screw opening
Installation Flush Mount Bracket E-931ACC-BLS6Q
Attachment screws, washers,
and nuts included with sensor
ENFORCER Sensor Brackets
2 SECO-LARM U.S.A., Inc.
Note: Wall Mount Bracket should be first installed to the wall using four attachment
screws (not included) and facing in the proper direction for the desired left or right-
facing orientation before proceeding with attachment of the sensors.
Installation for Wall Mount Bracket E-931ACC-BLS7Q
(Sample Installation for Sensor E-931-S45RRQ shown.)
Left-Facing Sensor Orientation
Right-Facing Sensor Orientation
Using sensor supplied bracket E-931ACC-BLS5Q (E-931-S45RRQ only)
Using sensor supplied bracket E-931ACC-BLS1Q
NOTICE: The information and specifications printed in this manual are current at the time of publication. However, the
SECO-LARM policy is one of continual development and improvement. For this reason, SECO-LARM reserves the right to
change specifications without notice. SECO-LARM is also not responsible for misprints or typographical errors.
Copyright © 2014 SECO-LARM U.S.A., Inc. All rights reserved. This material may not be reproduced or copied, in whole or
in part, without the written permission of SECO-LARM.
WARRANTY: This SECO-LARM product is warranted against defects in material and workmanship while used in normal
service for 1 (one) year from the date of sale to the original customer.
SECO-LARM
®
U.S.A., Inc.
16842 Millikan Avenue, Irvine, CA 92606
Website: www.seco-larm.com
PITSW1
Phone: (949) 261-2999 | (800) 662-0800
Email: sales@seco-larm.com
MiE-931ACC-BLSxQ_140814.docx
FIG. 1L
FIG. 1R
FIG. 2L
FIG. 2R
Parts List - Wall Mount Bracket E-931ACC-BLS7Q
Wall Mount Bracket
4x
Spring Lock Washers
Mounting Bolts
8x
Washers
Note sensor
bracket positioning
Order Part# 764-101%
  • Page 1 1
  • Page 2 2

SECO-LARM E-931ACC-BLS6Q Owner's manual

Category
Wall & ceiling mounts accessories
Type
Owner's manual
This manual is also suitable for

SECO-LARM E-931ACC-BLS6Q is a flush mount bracket compatible with sensors E-931-S35RRQ and E-931-S45RRQ. It allows for a quick and easy installation of these sensors, providing a secure and stable mounting solution. The bracket is designed to be mounted flush against a wall or surface, making it suitable for various indoor and outdoor applications. The package includes all necessary hardware for installation, including wall plate screws, bracket screws, and lock washers.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI