SECO-LARM E-931ACC-BLS6Q Owner's manual

Brand: SECO-LARM

Model: E-931ACC-BLS6Q

Category: Wall & ceiling mounts accessories

Type: Owner's manual

This manual is also suitable for

E-931ACC-BLS7Q

SECO-LARM E-931ACC-BLS6Q is a flush mount bracket compatible with sensors E-931-S35RRQ and E-931-S45RRQ. It allows for a quick and easy installation of these sensors, providing a secure and stable mounting solution. The bracket is designed to be mounted flush against a wall or surface, making it suitable for various indoor and outdoor applications. The package includes all necessary hardware for installation, including wall plate screws, bracket screws, and lock washers.

SECO-LARM E-931ACC-BLS6Q is a flush mount bracket compatible with sensors E-931-S35RRQ and E-931-S45RRQ. It allows for a quick and easy installation of these sensors, providing a secure and stable mounting solution. The bracket is designed to be mounted flush against a wall or surface, making it suitable for various indoor and outdoor applications. The package includes all necessary hardware for installation, including wall plate screws, bracket screws, and lock washers.

E-931ACC-BLS6Q

Flush Mount Bracket

E-931ACC-BLS7Q

Wall Bracket

Compatible with Sensors E-931-S35RRQ and E-931-S45RRQ

Manual

Sensor E-931-S35RRQ Shown

Parts List - Flush Mount Bracket E-931ACC-BLS6Q

1x

Wall Plate

1x

Bracket Screw and Lock Washer

1x

L-Bracket

2x

Wall Plate Screws

STEP 1

STEP 2

Note: Sensor E-931-S45RRQ

uses upper screw opening

Installation Flush Mount Bracket E-931ACC-BLS6Q

Attachment screws, washers,

and nuts included with sensor

ENFORCER Sensor Brackets

2 SECO-LARM U.S.A., Inc.

Note: Wall Mount Bracket should be first installed to the wall using four attachment

screws (not included) and facing in the proper direction for the desired left or right-

facing orientation before proceeding with attachment of the sensors.

Installation for Wall Mount Bracket E-931ACC-BLS7Q

(Sample Installation for Sensor E-931-S45RRQ shown.)

Left-Facing Sensor Orientation

Right-Facing Sensor Orientation

Using sensor supplied bracket E-931ACC-BLS5Q (E-931-S45RRQ only)

Using sensor supplied bracket E-931ACC-BLS1Q

NOTICE: The information and specifications printed in this manual are current at the time of publication. However, the

SECO-LARM policy is one of continual development and improvement. For this reason, SECO-LARM reserves the right to

change specifications without notice. SECO-LARM is also not responsible for misprints or typographical errors.

Copyright © 2014 SECO-LARM U.S.A., Inc. All rights reserved. This material may not be reproduced or copied, in whole or

in part, without the written permission of SECO-LARM.

WARRANTY: This SECO-LARM product is warranted against defects in material and workmanship while used in normal

service for 1 (one) year from the date of sale to the original customer.

SECO-LARM

®

U.S.A., Inc.

16842 Millikan Avenue, Irvine, CA 92606

Website: www.seco-larm.com

PITSW1

Phone: (949) 261-2999 | (800) 662-0800

Email: sales@seco-larm.com

MiE-931ACC-BLSxQ_140814.docx

FIG. 1L

FIG. 1R

FIG. 2L

FIG. 2R

Parts List - Wall Mount Bracket E-931ACC-BLS7Q

1x

Wall Mount Bracket

4x

Spring Lock Washers

4x

Mounting Bolts

8x

Washers

Note sensor

bracket positioning

Order Part# 764-101%

1
2

SECO-LARM E-931ACC-BLS6Q Owner's manual

Brand: SECO-LARM

Model: E-931ACC-BLS6Q

Category: Wall & ceiling mounts accessories

Type: Owner's manual

This manual is also suitable for

E-931ACC-BLS7Q

SECO-LARM E-931ACC-BLS6Q is a flush mount bracket compatible with sensors E-931-S35RRQ and E-931-S45RRQ. It allows for a quick and easy installation of these sensors, providing a secure and stable mounting solution. The bracket is designed to be mounted flush against a wall or surface, making it suitable for various indoor and outdoor applications. The package includes all necessary hardware for installation, including wall plate screws, bracket screws, and lock washers.

Download PDF

Related papers

Other documents