TOA SP-131 User manual

TOA
Brand
TOA
Model
SP-131
Type
User manual

This manual is also suitable for

TOA SP-131 is a speaker mount bracket designed for mounting horn speakers or wide-range speakers to walls or poles. With a withstand load of 8 kg, it's suitable for most speakers within this weight range. Made from stainless steel (SUS304), the bracket is durable and corrosion-resistant, making it suitable for both indoor and outdoor use. The adjustable mounting angle of up to 145 degrees allows for precise positioning of the speaker, ensuring optimal sound coverage.

TOA SP-131 is a speaker mount bracket designed for mounting horn speakers or wide-range speakers to walls or poles. With a withstand load of 8 kg, it's suitable for most speakers within this weight range. Made from stainless steel (SUS304), the bracket is durable and corrosion-resistant, making it suitable for both indoor and outdoor use. The adjustable mounting angle of up to 145 degrees allows for precise positioning of the speaker, ensuring optimal sound coverage.

INSTALLATION MANUAL
SP-131
SP-201
SP-301
Thank you for purchasing TOA's Speaker Mount Bracket.
Please carefully follow the instructions in this manual to ensure long,
trouble-free use of your equipment.
1. SAFETY PRECAUTIONS
• Before installation or use, be sure to carefully read all the instructions in this section for correct and safe
operation.
• Be sure to follow all the precautionary instructions in this section, which contain important warnings and/or
cautions regarding safety.
• After reading, keep this manual handy for future reference.
When Installing the Unit
• Install the unit only in a location that can structurally support the weight of the unit and the speaker. Doing
otherwise may result in the speaker falling down and causing personal injury and/or property damage.
• Do notuseother methods than specied to mountthe unit. Extreme force is applied to the unitand the
speaker could fall off, possibly resulting in personal injuries.
• Use nuts and bolts that are appropriate for the wall's structure and composition. Failure to do so may cause
the speaker to fall, resulting in material damage and possible personal injury.
• Tighten each nut and bolt securely. Ensure that the unit has no loose joints after installation to prevent
accidents that could result in personal injury.
• Donotmounttheunitinlocationsexposedtoconstantvibration.Theunitcanbedamagedbyexcessive
vibration,potentiallycausingthespeakertofall,whichcouldresultinpersonalinjury.
• Do not use anti-rust lubricant. If it contacts resin or rubber parts, they could deteriorate and cause the unit to
fall, possibly resulting in personal injury.
SPEAKER MOUNT BRACKETS
When Installing the Unit
• Avoidtouchingtheunit'ssharpmetaledgetopreventinjury.
When the Unit is in Use
• Do not stand or sit on, nor hang down from the unit as this may cause it to fall down or drop, resulting in
personal injury and/or property damage.
• Havetheunitcheckedperiodicallybytheshopfromwhereitwaspurchased.Failuretodosomayresultin
corrosion or damage to the unit that could cause the unit to fall, possibly causing personal injury.
2. GENERAL DESCRIPTION
These Speaker Mount Brackets are designed to mount horn speakers or wide range speakers to walls or poles.
Pole mounting of the speaker requires addition of the optional YS-60B Pole Band.
Indicates a potentially hazardous situation which, if mishandled, could
result in death or serious personal injury.
WARNING
Indicates a potentially hazardous situation which, if mishandled, could
result in moderate or minor personal injury, and/or property damage.
CAUTION
3. COMPONENT PARTS
4. INSTALLATION
4.1. SP-131 (Designed for pole mounting)
Quantity
SP-131* SP-201 SP-301
2
--
-
1
-
--
1
422
422
844
422
422
422
844
422
No.
1
2
3
4
5
6
7
8
9
10
11
Part name
SP-131 pole bracket
SP-201 base bracket
SP-301 base bracket
Hexagon bolt M8 x 20
Nut (for M8)
Plain washer (for M8)
Spring washer (for M8)
Hexagon bolt M10 x 25
Nut (for M10)
Plain washer (for M10)
Spring washer (for M10)
1
2
3
4
5
6
7
8
9
10
11
* The SP-131 contains 2 sets of brackets.
Step 1. Attach the SP-131 pole bracket to the speaker's mounting bracket.
Use the supplied bolts that fit holes in the speaker mounting bracket.
Step 2. Mount the SP-131 pole bracket to
the pole by using the YS-60B Pole
Band.
Note
The YS-60B permits speaker mounting to
a pole of 9 to 34 cm in diameter.
Example of mounting reinforcement
If the installation location is susceptible to
vibrations or strong wind, use the SP-131 in
combination with 2 YS-60Bs to reinforce the
mounting strength as shown below.
SP-131 pole bracket YS-60B (option)
Reinforcing plate
Note: Separately prepare the one with 5 mm or
more in thickness.
Nut
Spring washer
Speaker's mounting bracket
Plain washers
SP-131 pole bracket
Hexagon bolt
SP-131 pole bracket
YS-60B (option)
4.2. SP-201 (Designed for wall or pole mounting)
4.3. SP-301 (Designed for wall mounting)
Step 1. Attach the SP-201 base bracket to the speaker's mounting bracket.
Use the supplied bolts that fit holes in the speaker mounting bracket.
Step 2. Adjust the mounting angle of the
speaker's mounting bracket.
Adjustable range: Up to 145°
Step 3. Mount the SP-201 base bracket to the wall or pole.
[Example of wall mounting]
Note
Any bolts, nuts, and washers for
wall mounting are not supplied.
Separately prepare ones appropriate for walls.
Step 1. Attach the SP-301 base bracket to the speaker's mounting bracket.
Use the supplied bolts that fit holes in the speaker mounting bracket.
Step 2. Adjust the mounting angle of the
speaker's mounting bracket.
Adjustable range: Up to 145°
Step 3. Mount the SP-301 base bracket to the wall.
Note
Any bolts, nuts, and washers for wall mounting are
not supplied.
Separately prepare ones appropriate for walls.
Nut
Spring washer
Speaker's mounting bracket
Plain washers
SP-201
base bracket
Hexagon bolt
SP-201 base bracket
Speaker's
mounting bracket
YS-60B (option)
[Example of pole mounting]
Use 2 of the optional YS-60B Pole
Bands as shown at right.
Note
The YS-60B permits speaker
mounting to a pole of 20 to 34 cm
in diameter.
Speaker's mounting bracket
SP-301
base bracket
Hexagon bolt
Spring washer
Nut
Plain washers
Speaker's mounting bracket
SP-301 base bracket
Note
Tighten the bolts after angle
adjustment.
Note
Tighten the bolts after angle
adjustment.
URL: http://www.toa.jp/
133-01-00232-00
*TheTOAspeakersheavierthan8kgcanbemountediftheyarerecommendedforusewiththeSP-131inour
catalogs or other material.
Note: Thedesignandspecicationsaresubjecttochangewithoutnoticeforimprovement.
• Optional product
Pole Band: YS-60B
5. DIMENSIONAL DIAGRAM
6. SPECIFICATIONS
[SP-131]
[SP-301]
[SP-201]
R90
40
30
56
11
115
37
136
3
11
145°
ø102
260
180
46
160
3
80
28
2-13x55
ø11
140
90
162
11
180
140
145°
7-ø11
ø102
15
33
3
80
4-8x40
Unit: mm
Model No. SP-131 SP-201 SP-301
Withstand load 8kg* 10 kg 5 kg
Finish Bracket: Stainless (SUS304)
Bolt, nut, washer: Stainless
Weight 330 g (per bracket) 610 g (Bracket only) 910 g (Bracket only)
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4

TOA SP-131 User manual

TOA
Brand
TOA
Model
SP-131
Type
User manual
This manual is also suitable for

TOA SP-131 is a speaker mount bracket designed for mounting horn speakers or wide-range speakers to walls or poles. With a withstand load of 8 kg, it's suitable for most speakers within this weight range. Made from stainless steel (SUS304), the bracket is durable and corrosion-resistant, making it suitable for both indoor and outdoor use. The adjustable mounting angle of up to 145 degrees allows for precise positioning of the speaker, ensuring optimal sound coverage.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents