Roland RD-300NX Owner's manual

Type
Owner's manual
With the factory settings, this product’s power will automatically be switched o 240 minutes
(4 hours) after you stop playing or operating the unit. If you dont want the unit to turn o
automatically, change the Auto O setting to “O as described below.
1. Press the [MENU] button.
The [MENU] button indicator will light.
2. Use the cursor [ ] [ ] buttons to select “0.System.
3. Press the [ENTER] button.
The “EDIT [System]” screen will appear.
4. Use the cursor [ ] [ ] to switch screens, and use the cursor [ ] [ ] buttons to
choose Auto O.
5. Use the [DEC] [INC] buttons to change the setting.
Value Explanation
O The power will not turn o automatically.
240min (Default)
The power will automatically turn o if no operation is performed for 240 minutes (4
hours).
The setting will be stored internally, and will still be in eect the next time this unit starts up.
When turning the unit’s power back on after it has been shut down
due to the Auto O function
Turn the [POWER ON] switch (or the [POWER] button) o; then wait for at least ve seconds
and turn it on.
If you fail to allow a sucient interval after turning the switch or button o, the power
might not turn on correctly.
Auto O Setting
Copyright © 2012 ROLAND CORPORATION
All rights reserved. No part of this publication may be reproduced in any form without the written
permission of ROLAND CORPORATION.
  • Page 1 1
  • Page 2 2

Roland RD-300NX Owner's manual

Type
Owner's manual

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

in other languages