With the factory settings, this product’s power will automatically be switched o 240 minutes
(4 hours) after you stop playing or operating the unit. If you don’t want the unit to turn o
automatically, change the “Auto O” setting to “O” as described below.
1. Press the [MENU] button.
The [MENU] button indicator will light.
2. Use the cursor [ ] [ ] buttons to select “0.System.”
3. Press the [ENTER] button.
The “EDIT [System]” screen will appear.
4. Use the cursor [ ] [ ] to switch screens, and use the cursor [ ] [ ] buttons to
choose “Auto O.”
5. Use the [DEC] [INC] buttons to change the setting.
Value Explanation
O The power will not turn o automatically.
240min (Default)
The power will automatically turn o if no operation is performed for 240 minutes (4
hours).
The setting will be stored internally, and will still be in eect the next time this unit starts up.
When turning the unit’s power back on after it has been shut down
due to the Auto O function
Turn the [POWER ON] switch (or the [POWER] button) o; then wait for at least ve seconds
and turn it on.
If you fail to allow a sucient interval after turning the switch or button o, the power
might not turn on correctly.
Auto O Setting
Copyright © 2012 ROLAND CORPORATION
All rights reserved. No part of this publication may be reproduced in any form without the written
permission of ROLAND CORPORATION.
/