9U/12U/15U Portable Server Rack With
Handles And Casters
RSPR-9U001
RSPR-12U001
RSPR-15U001
Use the M6×12 mm Phillips flat-head screws
(⑥) and the Phillips screwdriver to attach the
top panel (①) to the two side panels (③).
Turn the rack on its side and attach the casters
(⑤) (⑥) to your rack.
2.3
2.4
WARNING ! Please ensure that the rack is fully assembled with all included parts and hardwares before
attempting to mount any rack equipment.Failure to install and fully tighten any hardware could severely
compromise the structural integrity of the rack.If any hardware is missing,please contact Rosewill.com
customer service immediately.