Tripp Lite B110-SP-HDMI Quick start guide

Brand: Tripp Lite

Model: B110-SP-HDMI

Type: Quick start guide

Quick Start Guide

Digital Signage

In-Line HDMI

Surge Protector

Model: B110-SP-HDMI

1111 W. 35th Street, Chicago, IL 60609 USA • www.tripplite.com/support

Este guía esta disponible en español en la página de Tripp Lite:

www.tripplite.com/support

Ce guide est disponible en français sur le site Web de Tripp Lite :

www.tripplite.com/support

Русскоязычная версия настоящего краткого руководства представлена

на веб-сайте компании Tripp Lite по адресу: www.tripplite.com/support

WARRANTY REGISTRATION

automatically entered to win an ISOBAR

surge protector in our monthly drawing!

www.tripplite.com/warranty

19-03-094-93384D-EN.indd 1 5/17/2019 1:01:10 PM

Package Contents

Installation

Product Features

• B110-SP-HDMI In-Line Surge Protector

• Grounding Wire, 12 in.

• Mounting Screws (x2)

• Screw Anchors (x2)

• Grounding Wire Screw

• Quick Start Guide

• Protects an HDMI input and output

against Electrostatic Discharge (ESD),

lightning surges and cable discharge

events

• Meets IEC regulations:

o IEC 61000-4-2 (ESD) +/- 15kV(air),

+/- 8kV(contact)

o IEC 61000-4-4 (EFT) 40A (5/50ns)

o IEC 61000-4-5 (Lightning) 5A

(8/20µs)

• Lightning reaction speed: < 1ns

• Solid-state silicon-avalanche technology

• Low TMDS loss

• Supports UHD resolutions up to 4K x 2K

@ 30 Hz

• HDMI 1.4 and HDCP-compliant

• Easy in-line installation with integrated

mounting ears

• Passive by design – no external power

required

Note: The following instructions assume that two HDMI devices are currently connected together.

Single Device Protection:

1. Disconnect the installed HDMI cable from the device you wish to protect and attach

this cable to the “Cable End” of the In-Line HDMI Surge Protector.

2. With a user-supplied HDMI cable, connect the device to be protected to the

“Equipment End’ of the In-Line HDMI Surge Protector.

Note: For maximum protection, the HDMI cable between the “Equipment End” of the In-Line

HDMI Surge Protector and the HDMI equipment to be protected should not exceed 3 ft.

(0.9 m). Tripp Lite P568-003-Series High-Speed HDMI cables are recommended.

3. Connect the ground wire to either end of the In-Line HDMI Surge Protector and then

to earth ground.

In-Line HDMI

Surge Protector

HDMI Monitor

(Protected)

HDMI Player

(Not Protected)

Equipment

End

Cable

End

19-03-094-93384D-EN.indd 2 5/17/2019 1:01:10 PM

Protection

Package Contents

Speciﬁcations

Multiple Device Protection:

1. Disconnect the installed HDMI cable from both devices you wish to protect.

2. Connect the In-Line HDMI Surge Protector to each end of the previously uninstalled

HDMI cable, ensuring both ends of the HDMI cable are connected to the “Cable End”

of the In-Line HDMI Surge Protector.

3. With user-supplied HDMI cables, connect the “Equipment End” of each In-Line HDMI

Surge Protector to the HDMI devices you wish to protect.

Note: For maximum protection, the HDMI cable between the “Equipment End” of the In-Line

HDMI Surge Protector and the HDMI equipment to be protected should not exceed 3 ft.

(0.9 m). Tripp Lite P568-003-Series High-Speed HDMI cables are recommended.

4. Connect the ground wire to either end of each In-Line HDMI Surge Protector and then

to earth ground.

In-Line HDMI

Surge Protector

In-Line HDMI

Surge Protector

HDMI Monitor

(Protected)

HDMI Player

(Protected)

Equipment

End

Equipment

End

Cable End

Input / Output Connectors HDMI Type-A (Female)

ESD Protection 15kV (Air), 8kV (Contact)

EFT Protection 40A (5/50ns)

Lightning Protection

5A (8/20µs)

Lightning Protection Reaction Speed <1ns

Operating Temp 32°F to 131°F (0°C to 55°C)

Maximum Video Resolution 4K x 2K @ 30 Hz

HDMI 1.4

HDCP Pass through (up to 2.2)

Dimensions 1 x 1 x 2.3 in. (25.4 x 25.4 x 58.3 mm)

Weight 0.08 lb. (35g)

19-03-094-93384D-EN.indd 3 5/17/2019 1:01:10 PM

Warranty and Product Registration

2-YEAR LIMITED WARRANTY

TRIPP LITE warrants its products to be free from defects in materials and workmanship for a period

of two (2) years from the date of initial purchase. TRIPP LITE’s obligation under this warranty is

limited to repairing or replacing (at its sole option) any such defective products. To obtain service

under this warranty, you must obtain a Returned Material Authorization (RMA) number from

TRIPP LITE or an authorized TRIPP LITE service center. Products must be returned to TRIPP LITE

or an authorized TRIPP LITE service center with transportation charges prepaid and must be

accompanied by a brief description of the problem encountered and proof of date and place of

purchase. This warranty does not apply to equipment, which has been damaged by accident,

negligence or misapplication or has been altered or modiﬁed in any way.

EXCEPT AS PROVIDED HEREIN, TRIPP LITE MAKES NO WARRANTIES, EXPRESS OR IMPLIED,

INCLUDING WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.

Some states do not permit limitation or exclusion of implied warranties; therefore, the aforesaid

limitation(s) or exclusion(s) may not apply to the purchaser.

EXCEPT AS PROVIDED ABOVE, IN NO EVENT WILL TRIPP LITE BE LIABLE FOR DIRECT, INDIRECT,

SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OF THIS PRODUCT,

EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. Speciﬁcally, TRIPP LITE is not liable

for any costs, such as lost proﬁts or revenue, loss of equipment, loss of use of equipment, loss of

software, loss of data, costs of substitutes, claims by third parties, or otherwise.

PRODUCT REGISTRATION

Visit www.tripplite.com/warranty today to register your new Tripp Lite product. You’ll be automatically

entered into a drawing for a chance to win a FREE Tripp Lite product!*

* No purchase necessary. Void where prohibited. Some restrictions apply. See website for details.

WEEE Compliance Information for Tripp Lite Customers and Recyclers (European Union)

Under the Waste Electrical and Electronic Equipment (WEEE) Directive and implementing

regulations, when customers buy new electrical and electronic equipment from Tripp Lite they

are entitled to:

• Send old equipment for recycling on a one-for-one, like-for-like basis

(this varies depending on the country)

• Send the new equipment back for recycling when this ultimately becomes waste

Use of this equipment in life support applications where failure of this equipment can reasonably

be expected to cause the failure of the life support equipment or to signiﬁcantly affect its safety or

effectiveness is not recommended.

Tripp Lite has a policy of continuous improvement. Speciﬁcations are subject to change without

notice. Photos and illustrations may differ slightly from actual products.

1111 W. 35th Street, Chicago, IL 60609 USA • www.tripplite.com/support

19-03-094 93-384D_RevB

19-03-094-93384D-EN.indd 4 5/17/2019 1:01:10 PM

Tripp Lite B110-SP-HDMI Quick start guide

Tripp Lite B110-SP-HDMI Quick start guide

Tripp Lite B110-SP-HDMI Quick start guide

Related papers