Philips 27PT6442 Owner's manual

Category
LCD TVs
Type
Owner's manual

This manual is also suitable for

User Manual
27PT5441/37
32PT5441/37
27PT6441/37
27PT6442/37
_ Thank you for choosing Philips.
Need help fast?
Read your User Manual first for quick tips that
your using your Philips product more enjoyable. If
you have read your instructions and still need
assistance you may access our online help at
w_.p4c.philips.com
or
call 1-800-531-0039
while with your product.
Model No.:
Seria No.:
PHILIPS
3121 235 21512
Congratulations on your purchase, and wel-
come to the "family!" To get the most from
your PHILIPS product, you must return your
Warranty Registration Card within I0 days, So
please mail it to us right now!
Once your PHILIPS purchase is registered, you're eligible to
receive all the privileges of owning a PHILIPS product
So complete and return the Warranty Registration Card
enclosed with your purchase at once. And take advantage of
these important benefits.
Warranty
Verification
Registeringyour prod-
Jct within 10days
:onfirmsyour right to
_naximumprotection
Jnder the terms and
:onditionsof your
PHILIPSwarranty.
Owner
Confirmation
Your completed
Warranty Registration
Card servesas
verification of owner-
ship in the event of
product theft or loss.
Model
Registration
Returning your
Warranty Registration
Card right awayguar-
anteesyou'll receive
all the informationand
special offers which
you qualifyfor asthe
owner of your model
_, This "bolt of lightning" indicates uninsulatedmaterial within your unit may cause
an electrical shock. For the safety of everyone in your household, please do not remove
product covering.
_,The "exclamation point" calls attention to features for which you should read the
enclosed literature closely to prevent operating and maintenance problems.
WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THiS
EQUIPMENT TO RAIN OR MOISTURE.
CAUTION: To prevent electric shock, match wide blade of plug to wide slot, and fully
insert.
ATTENTION: Pour _viter les chocs _Iectriques, introduire la lame lap[us large de [a
fiche dans la borne correspondante de la prise et pousser jusqu'au fond.
IMPORTANT SAFETY INSTRUCTIONS
Read before operating equipment
17.TiltJStabil"iF_y-Aft. All_demionsm_ comp_lywithrecomm_d
pro_ of_ _bi_ deign.
s_e# _e t_thefront,ortop,ofthecabinet_ich coul_
_ don_ endangery_u_l[,ordsil_e_byphongekcuo_[
ceq_ipm_dmuto_son_ topo!the_i_. Su_bem__ul_
ummp_ngly_fl _om_ topof_e _ androsepro_a
damagean_'orFerso_inj_7.
18.Wag or Ceiling Mounting. Thea_pl_nceshoul_be
mo_tedto a w_ or ceilingonlyas _cormn_M by t_
manu_
19.Power Lines, _n outdoorarmeniasbeul_beIo_t_ away
E_nFowrlin_.
20.0utdoor Antenna Grounding. IIa__i_ _en_a
iscontactedto _ _c_ver,besuretheant_aa_em is
_un_edsoa_toprovidestoneprotee_nagoinstvoltage
s_g__ built_ st_ccl_g_.
Secsioa810oftheHa_nalEtec_thCMe,ANSI_[PA_. 70-
1984,_m_deihbrmafio_,aithrespeato_per g_un_ of
toan_na _ unit,sizem gTo_omg_nectms,Io_
tioaofan_n_ge uoit,con_n tog_un_g ele_
e_des,_,d requirementsfor_ _oun_ eleco_de.SeeFigure
bevy.
21. Object and Uquld Entry. _'e sbeul_betakenso
er_ thaughope_.cor_ly_h i_corr_endMh_ema
fior_ _b_ sa_y s_d_dsbr 6Itand_lity Fro_erfiesof
its_ d_g_.
22.Battery UsageCAUTION. Toprewmis_ le_age
tha_may,_ inbeth{yi,:pe:,propertydan_age,o_dan_ageto
theuoi_
In_lallba_m conecdy,,oiO,+ an_- _ig,,edasmrked
Dommk bakeries(o1__d n_ _ carbonan__lin_,
P_n_ b_ w_n theunitis m u_dbr a b_g_e.
Example of Antenna Grounding
as per NEC - National Electric Code
iff_l'-J11l_"lgl_l
_T_'_ PANEL PANEL PANEL PANEL PANEL PANEL
s_t _,,_,_. 2 _.3 8 _.9 14 _.15
SAFETY PANE_ PANEl PANEL PANEL PANEL PANEL
,._o 4 _.5 10 Jl 16 _.17
PANEL PANE_ PANEL PANE_ PANEL PANEL PANEL
1 6 _-7 12 _.13 18 _-19
SEre2
U3AOD PANEL PANEL PANEL PANEL PANEL PANEL
20 _21_ _-26 _27 ..32 _'33
L_rr_ PANEL PANEl PANE PANEL PANEL PANEL
_,_1'_7 22 _-23 28 _29 34 _35
/ / /
_'PuIF_d PANEL PANEL PANEL PANEL PANEL PANEL
_. 24 _-25 30 _31 36 _-37
Subject Panel No.
Active Control ................. 23
Antenna/Cable Basic Connection ... 1
Audio/Video Connections
AVI input Jacks ............. 4
Component Video Input Jacks . .7
Headphone Jack ............. 5
Monitor Output Jacks ......... 8
S-Video Input Jacks .......... 6
Side AV Input Jacks . .5
AutoLock TM Controls
Access Code ............... 25
Block All Channels .......... 27
Block Channels ............. 26
Clear All Blocked Channels .. .27
Movie Ratings .............. 28
Other Blocking Options ...... 30
TV Ratings .................. 29
UnderstandingAutoLock TM .. .24
Automatically Programming TV .13
AutoPicture TM Control ........ 32
AutoSoend TM Control ......... 32
Basic Remote Operation ........ 3
Basic Television Operation ...... 3
Subject Panel N_
Cable Box Connection ...........
Channel Edit .................. 14
Clock Controls
Activate Control .............. 21
Clock ....................... 18
Display Control ............... 22
Specific Channel ...20
Start or Stop Time ........... 19
Closed Caption Control ........ 31
Demo Mode ................. 30
Factory Service Locations .. .36-37
Format Control .............. 17
Language Controls ........... 11
Limited Warranty ............ 38
Picture Menu Controls ........ 15
QuadraSurf rM............. 33-34
Remote Batteries .............. 3
Remote Button Descriptions ..9-10
Sleeptimer .................... 31
Sound Menu Controls ........... 16
Troubleshooting ............... 35
Tuner Mode ................... 12
Active Control, AutoPicture, AuloSound, ond ]ncredible Surround are trademarks of Philips
Consumer Electronics Company. Copyright 2001 Philips Consumer Electronics.*Manu factured
under license from Dolby Laboratories. "Dolby" _nd Ihe double-D symbol ore trademarks of Dolby
Laboratories.
_ur home k signal input might Antenna Connection
ome/h_m a single (75 ohm)
round cable, a Com,erter Box, orjh_m
an antenna. ]n either case the connec_
tion to the TV is very ea_2_
If your Cable TV signal or
Antenna signal is a round
cable (75 ohm) then you're
ready to connect to the TV,
If your antenna has flat twin-
lead wire (300 ohm), you first
need to attach the antennawires
to the screws on a 300 to 75 ohm
adaptel_
If you have a Cable Converter
Box: Connect the Cable TV sig-
nal to the Cable Signal IN(put)
plug on the Converter.
Combination
VHF/UHF Antenna
(Outdoor or Indoor)
Round Cable
75_
Connect the Cable TV cable or
Antenna cable (or 300 to 75 ohm
3dapter) to the 75f2 plug on the
TV.
If you have a Cable Converter
Box: Connect the OUT(put) plug
from the Converter to the 75ff2
plug on the TV.
Direct Cable Connection
Cable signal
coming from
Cable Company
75_ Round
Coaxial Cable
Jack Panel
Back of TV
[f ),our cable signal uses a cable
I box or deeoderJbllow the easy
steps below to complete the connec-
tion.
Cable Box (w/RF In/Outputs):
This connection will be mono.
Connect the Cable Companysupplied cable to the signal
iN(put) plug on the back of the
Cable Box.
Using a separate round coaxial
cable, connect one end to the
OUT(put) (TO TV)plug on the
back of the Cable Box.
Connect the other end of the
round coaxial cable to the 75£2
input on the back of the televi-
sion. Screw it down finger tight.
NOTE: If applicable, set the OUT-
PUT CHANNEL SWITCH on the
back of the cable box to CH 3 or 4.
Tur_e the TV to the same chanrtel and
change channels at the cable box. In
some cases, the cable box will auto-
matically tune to either channel 3 or 4,
change channels until the picture
appears.
Cable Box (whkudio/Video
Outputs):
This connection will supply Stereo
sotw_d.
Connect the Cable Company
supplied cable to the cable slg-
nallN(put) plug on the back of
the Cable Box.
Using a RCA type Video Cable,
connect one end of the cable to
the Video (or ANT, your cable
box may be labeled-di{]_rently)
Out ]a_:k on the cable box_and
the other end to the AVI Video
input on the TV_
Connect one end of the Audio
Left and Right Cable to the left
and right Audio Out L & R
jacks on the cable box. Connect
the other end to the AVI Audio L
& R Input jacks on the TM
NOTE: Use the AV button on the TV
remote control to tune to the AVI
channel for the cable box signal. Once
tuned change channels at the cable
box, not the te ev s on.
Cable Box (wfRF h,dOutputs):
Cable Signal IN from the
Cable Company
Round 750. J_ck Panel Back of TV
Coaxial Cable
Cable Box (w/Audio/Video Outputs):
C_ble Signal IN
Audio Cables
L (White) & R (Red) V_deo Cabte
(Yellow)
J _ iII"7±!,."l[ol Lvlr±! _In_l ;,4::1*':,loll II::LlW[e)_IIII_(olNLO1_1::1_r±ll| [e]_I
Example of Models 27PT6441/37 and 27PT6442/37
Press the POWER button to
turn the TV ON.
Note: You can also press any
button on the front of the TV to
turn the TV ON.
Press the VOLUME + button
to increase the sound level, or
the VOLUME - button to
lower the sound level.
Pressing both buttons at the
same time will display the on-
screen menu, Once in the
menu, use these buttons to
make adjustments or selections.
Press the CHANNEL UP + or
DOWN - button to select TV
channels.
Remote Sensor - Sensor tbr
remote control com-
mands when the remote is
used to control fileTV_
when in the_tandby Mode. Press _e Power q
Standby Li ht Indicator - Red li ,ht will show
button to return fl_eTV to it's active state. |
!
I
EZZ_
Point the remote control
toward the remote sensor win-
dow on the TV when operating
the TV with the remote.
REMOTE CONTROL
To load the supplied batteries
into the remote:
1. Remove the battery compart-
ment lid on the back of the remote.
2. Place the batteries (2-AA) in
the remote. Be sure the (+) and (-)
ends of the batteries line up correct_
ly (inside of case is marked.)
3. Reattach the battery lid.
Exmnple of Models 27PT5441/37 and 32PT5441/37
i _ Back of Remote
f Battery Compartment
_ 2-AA Batteries
Battery Lid
_e TV _ audioA4deo input jacks
re./br direct picture and sound
connections between the TV and a
VCR (or similar device) that has
audio/video output jacks. Both the
A V1 and A V2 Input Juek connections
are shown on this page, but either
one can be connected alone. Follow
the easy steps below to connect your
accessory device to the A V1 and A V2
IN Jacks located on the back of the
TI4
Connect the VIDEO (yellow)cable to the VIDEO AV| IN (or
AV2 IN) jack on the back of the
TV.
Connect the AUDIO (red and
white) cables to the AUDIO (left"
and right) AV| IN (or AV2 in)
jacks on the rear of the TV,
Connect the VIDEO (yellow)
cable to the VIDEO OUT jack on
the back of the VCR (either one
or two) or accessory device being
used.
Connect the AUDIO (red and
white) cables to the AUDIO (left
and right) OUT jacks on the rear
of the VCR (either one or two) or
accessory device being used.
_ lttrn the VCR (either one ortwo) or accessory device and
the TV ON.
Press the AV button to set the
TV to its AV|or AV2 channel.
BackofTV
AVt
Connec(ion
Back of VCR
withAudio andVideoOutptt(
Jack_)
AV2 Connection
With either of the VCRs (or
accessory devices) ON and a pre-
recorded _e (CD, DVD, etc.) VCRTwo(oraccessory
inserted, press the PLAY button device)(Equippedwire
to view the tape on the television. VideoandAudioOmputJacks)
lideo In
(Yellow)
Audio In
(Red and
White)
Audio and Video Side lnputs are
available jbr a quick connec-
tion of a VCR, to playback video
.[?om a camera, or attach a gam-
ing device. Use the AV button on
the remote control to ttme these
inputs.
Connect the video (yellow)
cable from the Video output
on the Camera (or accessory
device) to the Video (yellow)
Input located on the SIDE of
the TV.
For Stereo Devices: Connect
the audio cable (red and
white) from the Audio Left
and Right Outputs on the
Camera to the Audio in
(white)jack on the SIDE of
the television.
For Mono Devices: Connect
one end of the audio cable
from the Audio Out jack on
the device to the Audio in
(white) jack on the SIDE of
the television.
Turn the TV and the accesso-
ry device ON.
Press the AV button on the
remote control to tune the TV
to the side input jacks,
"Front" will appear on the
TV screen.
Press the PLAY button
on the accessory device to
view playback, or to access
the accessory device (camera,
gaming unit, etc.).
Jack Panel of Accessoty Device
®®®
®®®
_®o
_th e SOtper)- Video connection on
e rear of the TV can provide Back ofTV
you with better picture detail and
elarityjbr the playhack of accessory
sourc'es such as DBS (digital broad- _,_
east satellite), DVD (digital video v,_o@
discs), video games, and S-VHS VCR
(video cassette recordeO tapes than
the normal antenna picture connec-
tions.
NOTE: The accessory device must
have an S-VIDEO OUT(put) jack in
orderjbr you to complete the connec-
tion on this page.
Connect one end of the S-VIDEO CABLE to the S-
VIDEO jack on the b_ck of the
TV. Then connect one end the
AUDIO (red and white)
CABLES to the AV1 in AUDIO
L and R (left and right)jacks on
the rear of the TV.
Connect other end of the S-VIDEO CABLE to the S-VHS
(S-Video) OUT jack on the b_ck
of the VCR. Then connect the
other ends of the AUDIO (red
and white) CABLES to the
AUDIO (left and right) OUT
jacks on the rear of the VCR.
'l_arn the VCR and the TVON.
Audio Cables
(Red &
White)
Press the AV button or theCH + or CH - buttons on the
remote to scroll the channels
until SVHS appears in the upper
left comer of the TV screen.
Now your ready to place a pre-
recorded video tape in the VCR
and press the PLAY button.
VCRor Extelnal
Accessory Device
(with S-Video
Ou*put)
@)d--/ /--/L/®JJ
®®®
_®®
0®0
_omponentVideo inputs provide
_..ffbr the highest possible color
and picture resolution in the play*
back of digital signal source mc[teri-
al, such as with DVD pluyers. The
color dij]brence signals (Pb, Pr) and
the luminance (Y) signal are con*
nected and received s'eparately,
which allows Jbr improved color
bandwidth inf!)rmation (not possible
when using composite video or S-
Video connections).
Connect the Component (Y,Pb, Pr) Video OUT jacks from
the DVD player (or similar
device) to the(Y, Pb, Pr) in(put)
jack on the TV. When using the
Component Video inputs, it is
best not to connect a signal to the
AV in Video Jack.
Connect the red and white
AUDIO CABLES to the Audio
(left and right) output jacks on
the rear of the accessory device
to the Audio (L and R) AVI in
Input Jacks on the TV.
_ lhrn the TV and the DVD (or
digital accessory device) ON.
Press the AV button or the
CH + or CH - buttons to
scroll the available channels
until CVI appears in the upper
left comer of the TV screer_.
Insert a DVD disc into theDVD player and press the
PLAY _2 button on the DVD
Player.
The description f_r the component video
connecto_ may differ depending on the
DVD player or accessory digital source
equipment used (f_r example, Y, Pb, Pr; Y,
B-Y,R-Y;Y,Cl; Cb) Alihough abbrevia-
tlons and Termsmay vary,the Ielters b and r
standfbr lhe blue and red color eomponen_
signal connectors, and Yindicates *heluml-
nance signal Refbr to your DVD ordigital
accessory owner's manttal for definitionsand
connection details
The CVI connection wilt be dominate over the AV1
in Video Input. When a Component Video Device is
connected as descllbed, it is best not to have a video
signal connected to d_e AV1 in Video Input jack.
Back of TV
(Green, Blue, White)
Red)
Equipped with
Component Video
Outputs
®®®
_®®
0®0
AUDIO SYSTEM CONNECTION:
r_f.ae Audio/VMeo (Monitor) Output
cks are great Jbr recording with
a VCR or used to connect an exter-
nal audio system.fbr better sound
reptr)duction. '_'_ ................
AUDIO SYSTEM
CONNECTION:
Connect one end of the
R(ight) and L(eft) AUDIO
(Monitor Out) jacks on the TV
to the R and L audio input jacks
on your amplifier or sound sys-
tem. Set the audio system's vol-
ume to a normal listening level.
'lurn the TV and audio sys-
tem ON. "lb adjust the volume
on the audio system, you will
need to change the volume at
the external audio system, not
the television.
Back of TV
Audio Cables
(Red and White)
SECONDVCR CONNECTION:
NOLO: Refer to panel number 4 for SECOND VCR CONNECTION:
the proper hookup of the first VCR.
Follow the instructions on how to Backof TV
tune to the AV'I channel to view a
pre-recorded tape.
The following steps allow you to
connect a second VCR to record
the program while your watching
it.
Connect one end of the yellow
Video Cable to the Monitor
Out VIDEO plug. Connect the
other end to the VIDEO IN plug
on the second VCR.
Vide
Cable
Connect one end of the redand white Audio cable from
the Monitor Out AUDIO L and
R plugs on the TV to the
AUDIO IN plugs on the VCR.
Turn the Second VCR ON,insert a VHS tape and it's
ready to record what's being
viewed on the TV screen.
!Zl,
Ist VCR
(refer to panel 4 fbr
2nd VCR with Audio mad proper connection)
Video Input Jacks
OUADRASURF Buttons
(Red, Green, Yellow, Blue) Allows you to
store and surf up to 10 channels you
"X
choose for each colored button.
AV Button
Press to select an accessory signal input
from the front AV inputs.
SMILEY Button
Press to add channels to the
"QuadraSurf' lists. Works with all col-
ored buttons.
AUTO SOUND Button
Press repeatedly to choose from different
factory pre-defined sound settings.
Choose from Personal (how you set the
Sound Menu options), Voice (for pro-
gramming with speaking only), Music
(for musical type programs such as con-
certs), or Theatre (nsed when watching
movies).
MEN I_*Button
Press to display the on-screen menu. Also
can be nsed to back out of the on-screen
menu until it disappears fi'om the TV's
screen.
®
sl_nls
I
MfflE
Button
Press to activate the Closed Captioning
options. Repeatedly pressing the CC but-
tonwillscrolltheavallablooptionsontho ®®®
TV screen.
VOL(ume) + or - Buttons
Press the VOL + button to increase the
to decrease the TV's s level.
MUTE Button
Press the mute button to eliminate the
sound being heard fi'om the _fV."MUTE"
will be displayed on the TV s screen.
Press
this button for
(See panel 30 fo
SLEEP Button
Press the Sleep button to set the TV to
automatically turn itself off after a set
period of time. Press repeatedly to select
15, 30, 45, 60, 90, 120, 180, or240 min-
utes.
Press to turn the TV on or off.
th'ess to toggle between the last viewed channel
and the channel presently being viewed.
®®®
®®
SLEEPi
..... J
Allows you to delete channels from the "Quadra
Surf' lists for the colored buttons. Works with
all colored buttons.
tS"essrepeatedly to choose from 5 different lZac-
tory predefined picture settings. Choose from
Pers6nal (how you set the Picture Menu
Adiusmlent controls), Movies (for movies),
Sports (for any sporting event), WeakSignal
(used when the s_gnalbeing received is not
great), or Multimedia (for video games).
_-- STATUSIEXITButton
tS"essto display the current channel number, if
the on-screen menu is displayed, press the
Status/Exit button of remove it from the TV's
screen.
_,--A_ V. < a.andnd> Buttons
th'ess to navigate, select, and adjust conWols
within the on-screen menu. Also use the CUR-
SOR A or CURSOR V to activate or deacti-
vate the EXPAND 4:3 screen formatting con-
trol.
t_:essto select channelsin ascending or
descending order.
tS_essthe nmnbered buttons to select TV chan-
nels or to enter certain values within the on-
screen menu. For single channel entries, press
the numbered button for the channel you desire.
The TV will pause for a second or two before
changing to the chosen channel.
t5_essto display the 'q'i her' menu. Within this
menu, set the time, set the TV to tune to a cer-
tain channel at a certain time once or daily.
FT r French and Span&h speaking
f
F owners an onscreen I
[
Language option is present. With the
Language control you can set the
TVs on-screen nen t to be s'ho'a n n
English, French, or Spanish.
Press the MENU button on
the remote control to show the
on-screen menu.
Press the CURSOR UP A orDOWN x/buttons to scroll
though the on-screen menu
until the word Install is high-
lighted.
Press the CURSOR RIGHT> button to display the
Install menu features.
Press the CURSOR UP A orDOWN x/buttons to scroll
through the install featnses until
the word Language is high-
lighted.
Press the CURSOR RIGHT
> button repeatedly to
select English, Francais
(French), or Espafiol
(Spanish).
When finished, press the
STATUS/EXIT button to
remove the menu from the
TV's screen.
®®®
®®®
[ ]
[ oR
_s_
[ ]
E ]
The Language control only
makes the TV's on-screen Menu
items appear in English, Spanish,
or French text.
it does not change the other on-
screen text features such as
Closed Caption (CC) TV shows.
i _ _ in -" [o]L','B I[e]ieJ-1:11 i: 1:11IIeJ_I:l ;il _ [e) l] :lLe[e) _i i ;{e] I
Tahe TUNER MODE control ,
llows you to change the TVs
input _ignal to either ANTENNA,
CABLE, or AUTO mode. lt:s'
important [br the TV to know
what type of signal to Iook,f!)r
(Cable TV or an Antenna). in the
AUTO mode, when the AUTO
PROGI_tM [_ature is activated,
the TV will automatically choose
the correct mode.
Press the MENU button on
the remote to show the on-
screen menu.
Press the CURSOR UP A
or DOWN V buttons to
scroll through the on-screen ILl
menu until the word Install
N
is highlighted.
Press the CURSORRIGHT button to display
the Install menu features.
Press CURSOR UP A or
DOWN V buttons to scroll
the Install features until the
wolds Tuner Mode is high-
lighted.
Press the CURSOR
RIGHT button to select
either Antenna, Cable, or
Auto mode.
l] ........
®®®
_®o
k..__.,
%
E I
E I
E I
oR
E I
When finished, press the
STATUS/EXIT button to
remove the on-screen menu
from the TV's screen.
When CABLE is selected, channels I-
125 are available.
When ANTENNA is selected, chan-
nels 2-69 are available.
When AUTO is selected, the TV will
automatically set itself to the correct
mode based on the type of signal it
detects when the AUTO PROGRAM
feature is activated.
y_ur TV can automatically _et
tse_Jbr local area (or _'able
TV) channels. Thi_ makes it easy
Jbr you to select only the TVsta-
tions in your area when the
CHANNEL (+), (-) buttons are
pressed.
Note: Make sure the antenna or
cable _ignal connection has been
completed beJbre AUTO PRO-
GRAM i_ activated.
i ress the MENU button onthe remote to show the on-
screen nlenu.
Press the CURSOR UPA
or DOWN V buttons to
scroll through the on-screen
menu until the word Install
is highlighted.
Press the CURSOR RIGHT
> button to display the
Install menu features.
Press CURSOR UP A orDOWN V buttons to scroll
the Install features until the
words Auto Program are
highlighte&
Press the CUILSOR RIGHT> button to start the Auto
Program scanning of chan-
nels. Auto Programming will
store all available channels
in the TV's memory then
tune to the lowest available
channel when done.
When finished, press the
STATUS/EXIT button to
remove the menu from the
TV's screen.
When CABLE is selected, channels I-
125 are available.
When ANTENNA is selected, chan-
nels 2-69 are available.
When AUTO is selected, the TV will
automatically set itself to the correct
mode based on the type of signal it
detects when the AUTO PROGRAM
feature is activated.
C1_DDnnelEdit makes it ea,syfbr you to
or DELETE channd_.f?om the
list qf chmme_ stored in the TV_ memot3_
Press the MENU baron on the
re*note con_)l to show the on-
_reell menu.
Press the CURSOR UP A or
DOWN V barons to scroll though
the on-screen menu until the word
Install is highlighted.
Press the CURSOR RIGHT >
button to display the Install menu
features.
Press the CURSOR UP A or
DOWN V barons to scroll through
the Inslall t_amres until the words
Channel Edit are highlighted.
Press the CURSOR RIGHT >
button to display the Channel Edit
options.
With the Channel Edit ooprtions
displayed, and Channel lfighlight-
ed; you can use the cursor bultons to
scroll through all available channels
that you wish to add (skipped OFF)
or delete (Skipped ON) from the
TV's memory. You can also use the
NUMBERED buttons to go directly
to a specific numbered channel that
you want to add or skip. Or, you can
also use the Cti+ or Cti- to quickly
scan through the channels _hat have
not been skipped.
Using the CURSOR DOWN V
button, scroll _hemenu to highlight
the word SKIPPED.
Now use the CURSOR RIGHT >
to toggle between On or Off. If
ON is selected the charnels is
skipped when scrolling channels
with the CH+ or CH- buttons. If
OFF is selected the channels is not
skipped whom scrolling chmmels
with the CH+ or CI:t- buttons.
When finished, press the STA-
TUS/EXIT button to remove the
men'a from the screen.
E ]
ii:i!i i!i !i
An "X" appearing in front of
any channel will indicate that
channel has skip on. When the
CH _- or CIt _ buttons are used,
those channe s will be skipped.
Ts o adjust your TV piemre controls,
elect a channel and use the
Picture Menu Controls li_ted below:
Brightness Control - Press the
CURSOR RIGHT > or LEFT
< buttons until the darkest
paris of the picture are as bright
as you prefer.
_- Press the
CURSOR RIGHT > or LEFT
< buttons to add or eliminate
color,
Picture Control - Press the
CURSOR RIGHT > or LEFT
< buttons until lightest paris of
the picture show good detail.
Sharnness Control - CURSOR
RIGHT > or LEFT < buttons
to improve detail in the picture.
_- Press the CUR-
SOR RIGHT > or LEFT <
buttons to obtain natural skin
tones.
Color Temo Control - Press
the CUP, SOR RIGHT > or
LEFT < buttons to select
Normal, Cool, or Warm picture
preferences. (Normal will keep
the whites, white; Cool will
make the whites, bluish; and
Warm will make the whites, red-
dish.)
_- Press the
CURSOR RIGHT > or LEFT
< buttons to turn DNR On or
Off. Dynamic Noise Reduction
helps to eliminate "noise" from
the picture.
Contrast + Control - Press the
CURSOR RIGHT > or LEFT
< buttons to toggle the control
On or OFF. The Contrast + con-
h'ol helps to "sharpen" the pic-
ture quality, The black pottlons
of the picture become richer in
darkness and the whites become
brighter.
Picture
oCobr ....
o Picture
o Sharpness
o Tint
o ColorTemp.
[,,/Brightness _ ======t_ 65 I_]
[vColor 50 ]
[ vPicture ====€_ 501_]
IvSharpness ===€_ 50_]
I v'iint I=-0 1,I
Iv'ColorTemp. NormalI
Wan-n
co&
I v'DNR On I
Off
I v'Contrast+ On
Off
T_ a4#c_t )_vur TV sound, select and
e ihe Sound Menu ControL_ listed
below:
t 'lteble: Pre_ the CURSOR
_T > or LEIq'< buttons
to adj as1 the con_ol. The con_l
will enhance the high frequency
sounds.
Bass: Press the CUP, SOR
RIGHT > or LEIq" < buttons
to adj as1 the control, The control
will enhance the low frequency
sounds.
: Press the CURSOR
RIGHT > or LEIq' < buttons
to adiasl the level of sound com-
ing from the left and right speak-
ers.
AVI,: (Auto Volume Leveler)
Press the CUP,SOR RIGH'I >
or LEI_*[,( buttons to turnthe
control On or Off When On, AVL
will level out the sound being
heard when sudden changes m
volume occur during commercial
breaks or channel changes.
_: Press the CUR-
SOR RIGHT > or LEFI' < but-
tons to select between Dolby
Virtual or Stereo seltings (if
Stereo), or select Spatial or Mono
(If Mono).
._: Press the CURSOR
I_GHT > or LEIq" < buttons
to to_gle this control to On or Ofl]
SAP _sshort for Secondary Audio
Programming and is sent as a
third audio channel, a S,M° signal
can be healxJ apart frorn the cur-
_m TV program sound.Note: if
SAP is not present on a selected
show No SAP will appeal- on the
Screen.
7 Sound: Press the CTdl_qOR
I_GHT > or LEFF < buttons
to select between Stereo or Mono
settings. Note: if Stereo is not
present on a selected show and the
TV is placed in the Stereo mode,
the sound coming from the TV
will remain in the Mono mode.
Main A
o Picture Treble
],,Sound ) ] _ass
o Features Balance
o Install AVL
[ _/Treble 41 + 50 I) ]
[ v'Bass , +50, I
]v'Balance (I L+R I)1
I"Aw oo1
orOff
,/Incr. Surround Spatial ]1
or Mono /
/
v"Incr.Surround Dolby Virtual ]1
or Stereo
I,'SAP I
orOff
['¢Sound Mono]
or Stereo
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42

Philips 27PT6442 Owner's manual

Category
LCD TVs
Type
Owner's manual
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI