BrickHouse Security SparkNanoGPS Quick start guide

Type
Quick start guide

This manual is also suitable for

Disconnect the attached
mini-USB cable from
the battery pack
Quick Start Guide
Spark Nano 7 Extended Battery Pack
1
Connect the battery
pack to the AC power
adapter and charge for
approximately 20 hours.
2
3
If you need additional help, please visit BrickHouseSecurity.com,
call 800-654-7966 or email support@brickhousesecurity.com
Once fully charged, disconnect the power
adapter and reattach the mini-USB cable
to the battery pack. Connect it to your
Spark Nano 7 and place them in the
case together.
Make sure the cable is connected
securely on both ends and the case is
locked. You’re ready to start tracking!
  • Page 1 1

BrickHouse Security SparkNanoGPS Quick start guide

Type
Quick start guide
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI