Strong SR-EHR-SYSTEM-1624 Owner's manual

Strong
Brand
Strong
Model
SR-EHR-SYSTEM-1624
Category
Rack accessories
Type
Owner's manual

This manual is also suitable for

Strong SR-EHR-SYSTEM-1624 is an adjustable height shelving rack with a lifetime limited warranty. It is constructed of steel with a deep black powder coat and has a maximum load capacity of 400 lbs. The rack height is adjustable from 16-24U, and it comes with no tools required for assembly. The EZ Glide runners allow for ease of mobility, and the shelves have Quick Adjust Technology. The rack can be flipped or turned over to accommodate different orientations of rack-mounted gear. Optional corner covers are included for a more finished look.

Strong SR-EHR-SYSTEM-1624 is an adjustable height shelving rack with a lifetime limited warranty. It is constructed of steel with a deep black powder coat and has a maximum load capacity of 400 lbs. The rack height is adjustable from 16-24U, and it comes with no tools required for assembly. The EZ Glide runners allow for ease of mobility, and the shelves have Quick Adjust Technology. The rack can be flipped or turned over to accommodate different orientations of rack-mounted gear. Optional corner covers are included for a more finished look.

Product Data Sheet
© 2014 Strong
TM
Evolve™ Hybrid Rack System
Adjustable Height Shelving Rack
SR-EHR-SYSTEM-1015, SR-EHR-SYSTEM-1624
Rack Assembly
1. Unbox the rack and lay it at on the oor. Pull the
top of the rack so that the pillars are upright.
2. Lock rack in upright position by inserting triangle
thumb screws (C) into the open positions opposite
of the pre-installed pivot screws (B). See diagram.
Verify that all screws (B, C) are tight and secure.
3. If the desired height is already achieved, proceed
to step 6. If more height is desired, remove the
plastic from the four quarter turn lock pins (F), and
pull outward, turning a quarter-turn to unlock them.
4. Pull the top directly upward until the desired height
is achieved.
5. Lock the quarter turn lock pins (F) by turning them
in the opposite direction and releasing them so that
they recess back into the pin housing.
Package Contents
A Collapsed Rack (x1)
B Pre-installed Pivot Screws (x8)
C Triangle Thumb Screws (x8)
D Shelves (quantity varies per size)
E Optional Corner Covers (x8)
F Pre-installed Quarter Turn Lock Pin
G Pre-installed Gray Shelf Release Button
H #10-32 x 3/8” with Nylon Washers
(x18: 10-15U model) (x36:16-24U model)
I Allen Key (not shown)
Key Features
• Rack height adjustable from 10-15U or 16-24U
• No tools required
• EZ Glide runners (for ease of mobility)
• Easy to reverse or ip over if rack-mounted gear is
preferred to be on top, bottom, rear, or front
• Shelves with Quick Adjust Technology
7. While depressing the shelf
release buttons (G), slide
stationary pins into desired shelf
locations and rotate the shelf into
place. Release buttons (G) and
ensure shelf is locked into place
and level.
8. Place/mount all desired
equipment on the rack. *
6. Flip or turn the rack to achieve the
desired orientation; whether that means
the rack-mounted gear goes in front,
back, top or bottom.
*Optional: Place Corner Covers (E) on if a more
nished look is desired.
A
B
C
E
B
C
D
F
G
Product Data Sheet
© 2014 Strong
TM
Racks Rev: 140704-1200
Evolve™ Hybrid Rack System
Adjustable Height Shelving Rack
Lifetime Limited Warranty
All Strong
TM
products have a Lifetime Limited Waranty. This warranty includes parts and labor repairs on all components found to
be defective in material or workmanship under normal conditions of use. This warranty shall not apply to products that have been
abused, modied, or disassembled. Products to be repaired under this warranty must be returned to SnapAV or a designated
service center with prior notication and an assigned return authorization number (RA).
For Technical Support: 1.866.838.5052
Lifetime
2
year
Product Construction Rack Spacing
Options*
Shelves A - Minimum Height B - Maximum
Height
C - Width D - Depth Max Load
Capacity
1U 2U
SR-EHR-SYSTEM-1015
Steel with
Deep Black
Powder Coat
4 3 2 22.85” 31.6”
21.71” 18.64” 400 lbs
SR-EHR-SYSTEM-1624 9 6 3 36.85” 50.85”
*Varies by install depending on placement of 1U & 2U spaced components.
A
C
D
Side View
Top View
Back View
Front View
B
1U
2U
  • Page 1 1
  • Page 2 2

Strong SR-EHR-SYSTEM-1624 Owner's manual

Strong
Brand
Strong
Model
SR-EHR-SYSTEM-1624
Category
Rack accessories
Type
Owner's manual
This manual is also suitable for

Strong SR-EHR-SYSTEM-1624 is an adjustable height shelving rack with a lifetime limited warranty. It is constructed of steel with a deep black powder coat and has a maximum load capacity of 400 lbs. The rack height is adjustable from 16-24U, and it comes with no tools required for assembly. The EZ Glide runners allow for ease of mobility, and the shelves have Quick Adjust Technology. The rack can be flipped or turned over to accommodate different orientations of rack-mounted gear. Optional corner covers are included for a more finished look.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents