Electrolux EI23BC35KSCA Owner's manual

Brand: Electrolux

Model: EI23BC35KSCA

Category: Side-by-side fridge-freezers

Type: Owner's manual

This manual is also suitable for

EN FRENCH DOOR BOTTOM

FREEZER/REFRIGERATOR

FR RÉFRIGÉRATEUR À PORTES

FRANÇAISES/CONGÉLATEUR EN BAS

ES REFRIGERADOR CON CONGELA-

DOR INFERIOR DE PUERTA DOBLE

808733902 February 2016

USE AND CARE GUIDE

GUIDE D’UTILISATION ET D’ENTRETIEN

GUIA DE USO Y CUIDADO

Finding Information

Please read and save

this guide

Thank you for choosing Electrolux, our

new premium brand in home appliances.

This Use & Care Guide is part of our

commitment to customer satisfaction and

product quality throughout the service life

of your new appliance.

Purchase date

Electrolux model number

Electrolux serial number

Keep a record for quick

reference

Finding Information .............................. 2

Safety .................................................... 3

Feature Overview .................................. 5

Installation ............................................ 6

Removing the Doors ........................... 10

Installing Door Handles ...................... 12

Connecting the Water Supply ............ 13

Controls .............................................. 15

Automatic Ice & Water

Maker/Dispenser ........................... 21

Automatic Ice Maker - Freezer .......... 24

Storage Features ................................ 25

Storing Food and Saving Energy ....... 31

Normal Operating Sounds & Sights ... 32

Changing the Water and Air Filters .... 33

Care and Cleaning .............................. 35

Solutions to Common Problems ........ 39

Warranty .............................................. 45

Table of contents

Questions?

For toll-free telephone support in the U.S.

and Canada: 1-877-4ELECTROLUX

(1-877-435-3287)

For online support and product information

visit http://www.electroluxappliances.com

NOTE

Registering your product with Electrolux

enhances our ability to serve you. You

can register online at

www.electroluxappliances.com or by

sending your Product Registration Card

in the mail.

Doors

 Handles are secure and tight

 Door seals completely to cabinet on

all sides

 Freezer drawer is level across top

Leveling

 Refrigerator is level, side-to-side and

tilted ¼ in. (6 mm) front-to-back

 Toe grille is properly attached to

refrigerator

 Cabinet is setting solid on all corners

Electrical Power

 House power turned on

 Refrigerator plugged in

Ice Maker

 House water supply connected to

refrigerator

 No water leaks present at all

connections - recheck in 24 hours

 Ice maker is turned ON

 Ice & water dispenser operates correctly

 Front ﬁlter must be ﬂush with ﬁlter

housing (select models)

Final Checks

 Shipping material removed

 Fresh food and freezer temperatures set

 Crisper humidity controls set

 Registration card sent in

Installation Checklist

Safety

Important safety instructions

General Safety

Safety Precautions

Do not attempt to install or operate your unit

until you have read the safety precautions

in this manual. Safety items throughout this

manual are labeled with a Danger, Warning,

or Caution based on the risk type.

Deﬁnitions

This is the safety alert symbol. It is

used to alert you to potential personal

injury hazards. Obey all safety messages

that follow this symbol to avoid possible

injury or death.

• Do not store or use gasoline or other

ﬂammable liquids near this or any

other appliance. Read product labels

for warnings regarding ﬂammability

and other hazards.

• Do not operate the refrigerator in the

presence of explosive fumes.

• Avoid contact with any moving parts

of the automatic ice maker.

WARNING

WARNING indicates a potentially

hazardous situation which, if not

avoided, could result in death or

serious injury.

IMPORTANT

Indicates installation, operation, or

maintenance information which is

important but not hazard-related.

CAUTION

CAUTION indicates a potentially

hazardous situation which, if not

avoided, may result in minor or

moderate injury.

WARNING

Please read all safety instructions

before using your new refrigerator.

DANGER

DANGER indicates an imminently

hazardous situation which, if not avoided,

will result in death or serious injury.

• Remove all staples from the carton to

avoid injury. Staples can also damage

ﬁnishes if they come in contact with

other appliances or furniture.

Child Safety

Packing Materials:

• Packing cartons covered with rugs,

bedspreads, plastic sheets, or stretch

wrap may become airtight chambers

and can quickly cause suffocation.

• Destroy or recycle the product’s carton,

plastic bags, and any other exterior

wrapping material immediately after

the refrigerator is unpacked. Children

should never play with these items.

Child Entrapment and Suffocation:

• These problems are not limited to the

past. Whether junked, abandoned,

or temporarily stored (even for a few

hours), unattended refrigerators and

freezers are dangerous. Please take

the precautions listed below.

Proper Disposal of

Refrigerators/Freezers

We strongly encourage responsible

appliance recycling/disposal methods.

Check with your utility company or visit

www.energystar.gov/recycle for more

information on recycling your old refrigerator.

Before you recycle or dispose of your

old refrigerator/freezer:

• Remove the doors.

• Leave the shelves and baskets in place

so children may not easily climb inside.

• Have refrigerant and compressor oil

removed by a qualiﬁed service technician.

• The refrigerator must be plugged into

its own dedicated 115 Volt, 60 Hz,

AC-only non-GFCI electric outlet.

The power cord of the appliance

is equipped with a three-prong

grounding plug for your protection

against electrical shock hazards.

It must be plugged directly into

a properly grounded three-prong

receptacle. The receptacle must be

installed in accordance with local

codes and ordinances. Consult a

qualiﬁed electrician. Do not use an

extension cord or adapter plug.

• If the power cord is damaged,

it should be replaced by the

manufacturer, service technician, or a

qualiﬁed person.

• Never unplug the refrigerator by pulling

on the power cord. Always grip the

plug ﬁrmly and pull straight out from

the receptacle to prevent damaging

the power cord.

• To avoid electrical shock, unplug the

refrigerator before cleaning and before

replacing a light bulb or LED light.

• Performance may be affected if

the voltage varies by 10% or more.

Operating the refrigerator with

insufﬁcient power can damage the

compressor. Such damage is not

covered under your warranty.

• Do not plug the unit into an outlet

controlled by a wall switch or pull cord

to prevent the refrigerator from being

turned off accidentally.

Electrical information

Grounding type wall receptacle

Power cord with

3-prong grounded plug

Do not, under

any circumstances,

cut, remove,

or bypass the

grounding prong.

Safety

WARNING

You must follow these guidelines to

ensure that your refrigerator’s safety

mechanisms are operating correctly.

IMPORTANT

To turn off power to your refrigerator,

unplug the power cord from the wall

outlet.

Feature Overview

Understanding features and terms

Your Electrolux refrigerator is designed for optimal convenience and storage ﬂexibility.

The illustration below is provided to assist you with familiarizing yourself with product

features and terminology.

NOTE

*Features may vary according to model. Model is shown without freezer drawer cover.

*Wire Tilt-Out Shelf

(inside freezer drawer)

IMPORTANT

Features not included with your

refrigerator can be purchased at

www.electroluxappliances.com or by

calling 1-877-435-3287.

Toe Grille

Luxury-Design

Shelves

Dairy Compartment

Ice Maker

Ice Bin

uxury-Design

Shelves

Freezer Baskets

*Perfect Temp

Drawer (PTD)

or Deli Drawer

(with humidity slides)

Crisper

Drawer

Crisper

Drawer

*Air

Filter

Water

Filter

*Adjustable

Hinges

*Incandescent Light *LED Light

*Tilt Can

Bin

*Special Items

Rack

(inside PTD)

LED Light *LED Light

Flipper Guide

Flipper

Mullion

*Freezer

Ice maker

*Air

Filter

Installation

This Use & Care Guide provides general

installation and operating instructions

for your model. We recommend using a

service or kitchen contracting professional

to install your refrigerator. Use the

refrigerator only as instructed in this Use &

Care Guide. Before starting the refrigerator,

follow these important ﬁrst steps.

Location

• Choose a place that is near a grounded,

non-GFCI, electrical outlet. Do Not use

an extension cord or an adapter plug.

• If possible, place the refrigerator out of

direct sunlight and away from the range,

dishwasher, or other heat sources.

• The refrigerator must be installed on a

ﬂoor that is level and strong enough to

support a fully loaded refrigerator.

• Consider water supply availability for

models equipped with an automatic

ice maker.

Installation

• Allow the following clearances for ease

of installation, proper air circulation, and

plumbing and electrical connections:

Sides & Top ⅜ inch (9.5 mm)

Back 1 inch (25.4 mm)

Door opening

Your refrigerator should be positioned

to allow easy access to a counter when

removing food. For best use of refrigerator

drawers and freezer baskets, the

refrigerator should be in a position where

both can be fully opened.

CAUTION

DO NOT install the refrigerator where

the temperature will drop below 55°F

(13°C) or rise above 110°F (43°C).

The compressor will not be able to

maintain proper temperatures inside

the refrigerator.

DO NOT block the toe grille on the

lower front of your refrigerator. Sufﬁcient

air circulation is essential for the proper

operation of your refrigerator.

NOTE

If your refrigerator is placed with the

door hinge against a wall, you may have

to allow additional space so the door

can be opened wider.

NOTE

The refrigerator doors are designed to shut

by themselves within a 20-degree opening.

Required Tools

You will need the following tools:

Top Hinge

Cover Front

Screw

Top Hinge

Cover Rear

Screw

Lower

Hinge

Screw

Top

Hinge

Screw

Components Provided:

Adjustable

Wrench

3/8" Fixed

Wrench

Phillips Head

#2 Square

Drive Head

(OR)

Tools Necessary:

Socket

Wrench Set

and

Installation

Toe Grille Must

Fit in Slot on

Anti-tip Bracket

Screw/Washer

Assembly

(3) Retaining Clips

Level Refrigerator & Ad-

just Doors (if necessary)

Guidelines for ﬁnal positioning of your

refrigerator:

• All four corners of the cabinet must

rest ﬁrmly on the ﬂoor.

• The sides should tilt ¼ inch (6 mm)

from front to back (to ensure that

doors close and seal properly).

• Doors should align with each other

and be level.

Most of these conditions can be met by

raising or lowering the adjustable front

rollers.

Raise

Anti-tip

Leg

Door

Lower

Door

To raise: turn adjustment screw

clockwise.

To lower: turn adjustment screw

counterclockwise.

3 Ensure both doors are bind-free with

their seals touching the cabinet on all

four sides and that cabinet is stable.

4 After unit is leveled, lower anti-tip leg

until it contacts the ﬂoor.

DO NOT

Loosen

Remove

These 3

Hex

Screws

CAUTION

Do Not loosen or remove these 3 hex

screws.

5 Install the toe grille by ﬁtting into

place.

To level the cabinet using the front rollers:

1 Slightly open freezer drawer. Lift the

toe grille and gently pull forward (see

illustration).

2 You can raise or lower each door.

Use a ⅜ inch socket wrench to turn

the adjustment screws (1 per side).

Installation

To adjust the door stop:

Door stop is adjustable between 85 to 145

degrees.

1 Open door to provide access to

screw.

2 Loosen screw.

3 Adjust door to desired location.

4 Rotate door stop until it makes

contact with the lower hinge.

5 Retighten screw.

6 Ensure door stops in desired location

before resuming normal use.

Open

Door

Degrees

Bottom of Door

To level the doors using the adjustable

lower hinge (select models):

1 Remove all food items from door bins

on door being adjusted.

2 Open doors to 90 degrees.

Rotate

Door to Desired

Location

Adjusting Door

Rotate Door

Stop

Re-tighten

Screw

Retighten Screw

NOTE

View shown is looking up at the bottom

of the refrigerator door.

Adjustable Door Stop

Door

Stop

Screw

Lower

Hinge

Min

Open

Max

Open

NOTE

Adjustable hinge should only be used

after doors have been leveled with

rollers.

Installation

Flipper

Mullion

Screw

Flipper

Mullion

Hinge

Adjusting Flipper Mullion Screw

2 Adjust ﬂipper mullion height. For

proper connection with the ﬂipper

mullion guide, there should be a

separation about the thickness of

a coin (0.060 inches, or 1.5 mm)

between the guide and ﬂipper

mullion.

3 Retighten screw.

3 Lift the door while adjusting the

washer. To raise the door, rotate

washer clockwise (when viewed from

the bottom). To lower door, rotate

washer counterclockwise (when

viewed from the bottom).

To adjust the ﬂipper mullion:

1 Loosen the screw located on the

ﬂipper mullion hinge.

Flipper

Mullion

Guide

Thickness

of a Coin

Adjusting Flipper Mullion Height

Raising/Lowering Door

Hinge

Washer

Raise

Door

Lower

Door

To remove the refrigerator doors:

1 Trace lightly around the door’s top

hinges with a pencil. This makes

reinstallation easier.

2 Disconnect the harness by grasping

both sides of the connector ﬁrmly,

depress the latch, and pull apart.

Remove the two screws from the top

hinge. Lift the door off of the bottom

hinge and set it aside.

3 Detach the water tube from the

connector located behind the

refrigerator and pull the tube back out

to the front of the unit. The connector

releases when you press inward on

the outer sleeve while pushing the

tube toward the connector then while

continuing to hold in the sleeve, pull

the tube away.

4 Unscrew the three lower hinge

screws and hinge if necessary.

Removing the Doors

Getting through narrow

spaces

If your refrigerator will not ﬁt through an

entrance area, you can remove the doors.

Check ﬁrst by measuring the entrance.

To prepare for removing the doors:

1 Make sure the electrical power cord

is unplugged from the wall outlet.

2 Open the freezer drawer and remove

the toe grille (see “Installation” section).

3 Remove any food from the door

shelves and close the doors.

To remove the top hinge covers:

1 Remove the two screws from each

cover over the top door hinges.

2 Lift inside edge of hinge cover and tilt

back.

NOTE

DO NOT remove the ground screw from

hinge.

Rear

Cover

Screw

Ground

Screw

Top

Hinge

Top Hinge

Cover

Hinge

Screws

Multi-wire

Cables

Leave

Hinge

With

Door

Front

Cover Screw

Water

Line

Rear

Cover

Screw

Front

Cover Screw

Top Hinge

Cover

Hinge

Screws

Two Wire

Cables

Leave

Hinge

With

Door

Top

Hinge

Ground

Screw

NOTE

Use care while pulling the water tube from

the unit to be sure you do not kink it.

Removing the Doors

Once both doors are in place, ensure

they are aligned with each other and level

(Please see the “Installation” section for

more details), and replace the top hinge

cover.

CAUTION

Be sure doors are set aside in a

secure position where they cannot

fall and cause personal injury, or

damage to the doors or handles.

NOTE

You will be pulling approximately ﬁve

feet of water tube from the back of the

refrigerator.

Press

Approximately

5 feet

Water

Line

To reinstall the right door, reverse the

above steps.

CAUTION

Drawer is heavy. Use caution when

lifting.

NOTE

When reinserting the water tube and

replacing the top hinge cover, use care

to be sure you do not kink the tube.

Lower Hinge Removal

Removing Freezer Drawer

1 Remove 4 hex head drawer screws.

2 Lift up drawer to remove.

Remove

Hex Head

Drawer Screw

DO NOT

Remove

Other

Screws

DO NOT

Loosen

Remove

These 3

Hex

Screws

Replacing Freezer Drawer

1 Lower drawer back into place.

2 Replace 4 hex head drawer screws

and tighten.

Installing Door Handles

Door Handle

Mounting

Instructions

1 Remove handles from

protective packaging.

2 Position fresh food

handle end caps (A)

over upper and lower

pre-installed shoulder

bolts (B) that are

fastened into door,

ensuring the holes for

the set screws are

facing towards the

opposite door.

3 While holding handle

ﬁrmly against door,

fasten upper and lower

Allen set screws (C)

with supplied Allen

wrench.

4 Repeat steps 2 and

3 to install opposite

handle. Ensure the

holes for the set screws

are facing towards the

ﬁrst door.

5 Position freezer handle

end caps over left

and right pre-installed

shoulder bolts that are

fastened to the drawer,

ensuring the holes for

the set screws are

facing down.

6 While holding handle

ﬁrmly against drawer,

fasten left and right

Allen set screws (C)

with supplied Allen

wrench.

End

Cap

End

Cap

End

Cap

End

Cap

Mounting Refrigerator Handles

End

Cap

End

Cap

Mounting Freezer Handle

NOTE

To ensure that handles are ﬂush with doors/drawer, make sure that set screws are

completely tightened.

CAUTION

Wear gloves and safety goggles. Use extreme CAUTION when installing these

handles.

Connecting the Water Supply

Before installing the water supply line,

you will need:

1. Basic Tools: adjustable wrench, ﬂat-blade

screwdriver, and Phillips

screwdriver

2. Access to a household cold water

line with water pressure between 30

and 100 psi.

3. A water supply line made of ¼ inch

(6 mm) OD, copper or stainless steel

tubing. To determine the length of

tubing needed, measure the distance

from the ice maker inlet valve at the

back of the refrigerator to your cold

water pipe. Then add approximately 7

feet (2.1 meters), so the refrigerator can

be moved out for cleaning (as shown).

To connect water supply line to ice

maker inlet valve:

1. Disconnect refrigerator from electric

power source.

2. Place end of water supply line into

sink or bucket. Turn ON water supply

and ﬂush supply line until water

is clear. Turn OFF water supply at

shutoff valve.

3. Remove plastic cap from water valve

inlet and discard cap.

4. If you use copper tubing - Slide brass

compression nut, then ferrule (sleeve)

onto water supply line. Push water

supply line into water valve inlet as far

as it will go (¼ inch / 6 mm). Slide ferrule

(sleeve) into valve inlet and ﬁnger tighten

compression nut onto valve. Tighten

another half turn with a wrench; DO

NOT over- tighten. See Figure 1.

If you use braided ﬂexible stainless

steel tubing - The nut is already

assembled on the tubing. Slide nut

onto valve inlet and ﬁnger tighten nut

onto valve. Tighten another half turn

with a wrench; DO NOT over- tighten.

See Figure 2.

5. With steel clamp and screw, secure

water supply line (copper tubing only)

to rear panel of refrigerator as shown.

6. Coil excess water supply line (copper

tubing only), about 2½ turns, behind

refrigerator as shown and arrange

coils so they do not vibrate or wear

against any other surface.

7. Turn ON water supply at shutoff valve

and tighten any connections that leak.

8. Reconnect refrigerator to electrical

power source.

9. To turn ice maker on, lower wire signal

arm (freezer ice maker) or set the ice

maker’s On/Off power switch to the

“On” position (fresh food ice maker).

WARNING

To avoid electric shock, which can

cause death or severe personal injury,

disconnect the refrigerator from

electrical power before connecting a

water supply line to the refrigerator.

CAUTION

• To Avoid Property Damage:

• Copper or Stainless Steel braided

tubing is recommended for the

water supply line. Water supply

tubing made of ¼ inch plastic is

not recommended to be used.

Plastic tubing greatly increases

the potential for water leaks,

and the manufacturer will not

be responsible for any damage

if plastic tubing is used for the

supply line.

• DO NOT install water supply

tubing in areas where

temperatures fall below freezing.

• Chemicals from a malfunctioning

softener can damage the

ice maker. If the ice maker is

connected to soft water, ensure

that the softener is maintained

and working properly.

IMPORTANT

Ensure that your water supply line

connections comply with all local

plumbing codes.

4. A shutoff valve to connect the water

supply line to your household water

system. DO NOT use a self-piercing

type shutoff valve.

5. Do NOT reuse compression ﬁtting or

use thread seal tape.

6. A compression nut and ferrule

(sleeve) for connecting a copper

water supply line to the ice maker

inlet valve.

Plastic water tubing

to ice maker

fill tube

Stainless

steel

water line

Water valve

bracket

Valve inlet

Water valve

6 ft. stainless steel water line

from household water supply

Figure 2Figure 1

Plastic Water Tubing

to Ice Maker

Fill Tube

Steel

Clamp

Brass

Compression

Nut

Ferrule

(Sleeve)

Copper

water line

Water Valve

Bracket

Valve Inlet

Water Valve

Copper water line

from household

water supply

(Include enough tubing in loop to

allow moving refrigerator out

for cleaning)

NOTE

Check with your local building authority for recommendations on water lines and

associated materials prior to installing your new refrigerator. Depending on your local/

state building codes, Electrolux recommends for homes with existing valves its Smart

Choice® water line kit 5305513409 with a 6 ft. (1.8 meters) Stainless Steel Water Line

and for homes without an existing valve, Electrolux recommends its Smart Choice®

water line kit 5305510264 with a 20 ft. (6 meters) copper water line with self-tapping

saddle valve. Please refer to www.electroluxappliances.com for more information.

Connecting the Water Supply

Controls

Wave-Touch

IQ-Touch

Controls

Wave-Touch

(select models)

Your refrigerator is equipped with a Wave-

Touch

control panel display. It is only

necessary to gently touch the glass. There

are three levels of display.

1st Level: Sleep Mode

Sleep Mode displays only the water, cubes

and crushed options. Touch an icon to

activate the desired dispenser mode. The

active dispenser mode is more brightly

illuminated.

2nd Level: Awakened Display

Mode

The control panel is awakened by touching

anywhere on the glass where there is an

indicator. Black space will not awaken the

display. After 10 seconds of inactivity, the

control panel will return to the Sleep mode.

IMPORTANT

When the ice maker is turned off, the

ice in the bucket should be transferred

to the freezer or discarded to prevent it

from melting.

NOTE

Refer to Automatic Ice Maker-Freezer

section for freezer ice maker controls.

ice off

(Fresh Food

Ice Maker)

Press and hold for three

seconds to turn the ice

maker “ON” or “OFF”.

The ice maker is OFF

when the LED above

the “Ice Off” icon is

illuminated. If there is no

red indicator, then the ice

maker is ON. Turning the

ice maker “OFF” disables

the ice dispensing

feature. Neither “CUBES”

nor “CRUSHED” will

operate with the ice

maker “OFF”.

The following dispenser options are

illuminated:

3rd Level: User Variable Options

Touching the options icon displays the

following options:

vacation

mode

Conserves energy by

increasing the time

between automatic

defrost. This feature is

automatically activated

during long periods

between door openings.

Vacation mode is

manually activated when

the red indicator is lit.

water ﬁlter Touch to display ﬁlter

condition status. Press

and hold for three

seconds to reset after

ﬁlter change.

air ﬁlter Touch to display ﬁlter

status. Press and hold for

three seconds to reset

after ﬁlter change.

fast freeze Activates a faster rate

for freezing food and

increased ice production.

dispenser light On / Off

control lock Press and hold for three

seconds to activate and

deactivate. This restricts

undesired changes to the

refrigerator’s settings and

prevents use of the ice

and water dispenser

Controls

Setting cooling temperatures

1 Touch the glass panel to illuminate

the 2nd

level of

display.

2 Select

the

options

icon.

Plus

(+) and

minus (-)

indicators will appear on either side of

the displayed temperatures.

IMPORTANT

Pressing the system on/off icon does

not turn off power to your refrigerator.

You must unplug the power cord from

the wall outlet.

temp display When active, it allows

the display of the freezer

and fridge temps during

“Sleep Mode”. The

temperature is displayed

when the red indicator

is lit.

temp mode Touch to toggle display

from Fahrenheit to

Celsius.

mute sounds Tones emitted by each

keypress can be turned off

based on user preference.

The sounds are muted

when the red indicator is

lit. Warning signals will stay

active.

factory

default

Resets all refrigerator

settings such as temp,

temp display, and alarm

tones to their factory

default settings.

on off Press and hold for three

seconds to turn off the

cooling system to clean

the refrigerator. It also

turns off the ice maker,

all dispenser functions,

and the Perfect Temp

drawer (select models).

The temperature display

will read OFF.

3 Press the + or – indicator to adjust

the temperature to the desired

setting.

The temperature display will begin

to blink with the ﬁrst touch. After ﬁve

seconds of inactivity, the display will

beep to accept the new temperature.

After 10 seconds, the display times

out and returns to the basic display.

Alarms

Door Ajar If the door has been left

open for an extended

period of time, an alarm

will sound and the

door ajar indicator will

display on the center of

the display. The alarm

is turned off by closing

the door. The alarm off

key will blink to prompt

the reset of any pending

alarms. Press this key to

reset any system Alarms.

High Temp In the event of a high

temperature condition,

the temperature display

will blink and display “HI”.

After 20 minutes, the

high temp alert will be

displayed and the alarm

off icon will illuminate until

pressed, acknowledging

the alarm, at which time

the highest temperature

reached will be displayed

and the refrigerator will

resume normal operation.

All other modes are

turned off until the alarm

is acknowledged.

The Sabbath Mode is a feature that

disables portions of the refrigerator and its

controls for both Wave-Touch

and IQ-

Touch

, in accordance with observance of

the weekly Sabbath and religious holidays

within the Orthodox Jewish community.

Wave-Touch

/IQ-Touch

“Sabbath Mode”

Sabbath Mode is turned ON and OFF by

simultaneously pressing and holding both

the outermost “-” and “+” indicators for

ﬁve seconds for both the Wave-Touch

and IQ-Touch

modes. The display shows

“Sb” while in Sabbath mode.

In the Sabbath Mode, the High Temp

alarm is active for health reasons. For

example, if the door is left ajar the High

NOTE

While in Sabbath Mode, neither the

lights, dispenser, nor the control panel will

work until Sabbath Mode is deactivated.

Refrigerator stays in Sabbath Mode after

power failure recovery. It must be deactivated

with the buttons on the control panel.

NOTE

While in Sabbath Mode, the Wave-Touch

model will only illuminate the -/+ keys used

to turn the Sabbath Mode Off.

Controls

NOTE

Although you have entered the Sabbath

Mode, the ice maker will complete the

cycle it had already initiated. The ice cube

compartment will remain cold and new ice

cubes can be made with standard trays.

Sabbath Mode and the Perfect

Temp

Drawer

The Perfect Temp

Drawer should be turned

off for the Sabbath/Holidays. Before putting

the refrigerator into the Sabbath mode, turn

the Perfect Temp

Drawer off by pressing

the drawer on/off button. The display will

show “OFF” and the drawer will turn off. Then

enter the Sabbath mode function on the

main refrigerator display. See Wave-Touch

IQ-Touch

“Sabbath Mode” section. When in

Sabbath mode, the display will not illuminate

and the drawer will remain off. The drawer can

still be used as a non-temp controlled drawer

in this mode. When the refrigerator is taken out

of Sabbath mode, the Perfect Temp

Drawer

will have to be turned back on.

NOTE

If the Perfect Temp

Drawer is not turned

off prior to putting the unit into Sabbath

Mode, it will continue to adjust itself to

maintain the set point even if the display

does not illuminate to show that it is still on.

Power Fail In the event of a power

failure, the power fail alert

will be displayed and the

alarm off key will blink

until the alarm off icon is

pressed, acknowledging

the alarm. Other

modes may be turned

off until the alarm is

acknowledged. When the

power fail alert is turned

off, the refrigerator will

resume normal operation.

The high temp alarm may

also be illuminated until

a safe operating range

temperature has been

reached.

Alarms

Temp alarm is activated. The refrigerator

will function normally once the door

is closed, without any violation of the

Sabbath/Holidays. The High Temp alarm

is permitted when cabinet temperature

is outside the safe zone for 20 minutes.

The alarm silences itself after 10 minutes

while the High Temp icon stays lit until the

Sabbath mode is exited.

For further assistance, guidelines for

proper usage and a complete

list of models with the Sabbath

feature, please visit the web at

http:\\www.star-k.org.

Controls

IQ-Touch

(select models)

Your refrigerator is equipped with a Glass

Touch control panel. It is only necessary

to gently touch the glass. There are three

dispenser modes:

1 Water

2 Ice Cubes

3 Crushed Ice

A red indicator light will be illuminated

above the active feature.

Touch the icon to activate the options

below.

NOTE

Refer to Automatic Ice Maker-Freezer

section for freezer ice maker controls.

ice off

(Fresh Food

Ice Maker)

Press and hold for three

seconds to turn the ice

maker “ON” or “OFF”.

The ice maker is OFF

when the LED above

the “Ice Off” icon is

illuminated. If there is no

indicator, then the ice

maker is ON. Turning the

ice maker “OFF” disables

the ice dispensing

feature. Neither “CUBES”

nor “CRUSHED” will

operate with the ice

maker “OFF”.

fast freeze Activates a faster rate

for freezing food and

increased ice production.

dispenser

light

On / Off

control lock Press and hold for three

seconds to activate and

deactivate. This restricts

undesired changes to the

refrigerators settings and

prevents use of the ice

and water dispenser.

vacation

mode

Conserves energy by

increasing the time

between automatic

defrost. This feature is

automatically activated

during long periods

between door openings.

Vacation mode is

manually activated when

the red indicator is lit.

water ﬁlter Touch to display ﬁlter

condition status. Press

and hold for three

seconds to reset after

ﬁlter change.

air ﬁlter Touch to display ﬁlter

status. Press and hold for

three seconds to reset

after ﬁlter change.

temp display Touch to toggle the

freezer and fridge temp

display on and off.

Touch and hold temp

display to toggle display

from Fahrenheit to Celsius.

mute sounds Tones emitted by each

key press can be turned

off based on user

preference. The sounds

are muted when the red

indicator is lit. Warning

signals will stay active.

factory

default

Resets all refrigerator

settings such as temp,

temp display and ring

tones to their factory

default settings.

on off Press and hold for

three seconds to

turn off the cooling

system to clean the

refrigerator. It also turns

off the ice maker and all

dispenser functions. The

temperature display will

read OFF.

Controls

IMPORTANT

Pressing the system on/off icon does

not turn off power to your refrigerator.

You must unplug the power cord from

the wall outlet.

IMPORTANT

When the ice maker is turned off, the

ice in the bucket should be transferred

to the freezer or discarded to prevent it

from melting.

Setting cooling temperatures

1 Touch the control panel to illuminate

plus (+) and minus (-) indicators

on either side of the temperatures

displays.

2 Press the + or – indicator to adjust

the temperature to the desired

setting.

The temperature display will begin to

blink with the ﬁrst touch. The display

will time out after a minute and

returns to the basic display.

Alarms

Door Ajar If the door has been left

open for an extended

period of time, an alarm

will sound and the door

ajar indicator will display

on the right side of the

control panel. The alarm

is turned off by closing

the door. The mute

sounds key will blink to

prompt the reset of any

pending alarms. Press

this key to reset any

system alarms.

High Temp In the event of a high

temperature condition,

the temperature display

will blink and display “HI”.

After 20 minutes, the

high temp alert will be

displayed and the alarm

off icon will illuminate until

pressed, acknowledging

the alarm, at which time

the highest temperature

reached will be displayed

and the refrigerator will

resume normal operation.

All other modes are

turned off until the alarm

is acknowledged.

Power Fail In the event of a power

failure, the power fail alert

will be displayed and

the temperature display

will blink until the mute

sounds icon is pressed,

acknowledging the alarm.

Other modes may be

turned off until the alarm

is acknowledged. The

power fail alert is turned

off and the refrigerator will

resume normal operation.

The high temp alarm may

also be illuminated until

a safe operating range

temperature has been

reached.

Page is loading ...

Electrolux EI23BC35KSCA Owner's manual

Brand: Electrolux

Model: EI23BC35KSCA

Category: Side-by-side fridge-freezers

Type: Owner's manual

This manual is also suitable for

Download PDF

report

Electrolux EI23BC35KSCA Owner's manual

This manual is also suitable for

Electrolux EI23BC35KSCA Owner's manual

Related papers

Other documents