e2v ELIIXA+ 8KCXP COLOR User manual

e2v
Brand
e2v
Model
ELIIXA+ 8KCXP COLOR
Category
Camera accessories
Type
User manual

This manual is also suitable for

e2v.com/imaging
WE PARTNER WITH OUR CUSTOMERS TO IMPROVE, SAVE AND PROTECT PEOPLE’S LIVES
User Manual
ELIIXA+ 16K/8K CXP COLOR
USER MANUAL ELIIXA+ 16K/8K CXP COLOR – REV G – 09/2016
Table of Contents
1 CAMERA OVERVIEW ................................................................................................................ 5
1.1 Features ................................................................................................................................................... 5
1.2 Key Specifications .................................................................................................................................... 5
1.3 Description............................................................................................................................................... 6
1.4 Typical Applications ................................................................................................................................. 6
1.5 Models ..................................................................................................................................................... 6
2 CAMERA PERFORMANCES ....................................................................................................... 7
2.1 Camera Characterization ......................................................................................................................... 7
2.2 Image Sensor and color modes ............................................................................................................... 8
2.2.1 True Colour Enhanced Mode (TCE) .................................................................................................. 8
2.2.2 True Colour Single Mode (TCS) ......................................................................................................... 9
2.2.3 Full Definition Single Mode (FDS) ..................................................................................................... 9
2.2.4 Full Definition Enhanced Mode (FDE)............................................................................................. 10
2.2.5 Color Interpolation in Full Definition modes. ................................................................................. 10
2.2.6 Column Interpolation Correction (True Color only) ....................................................................... 11
2.2.7 Line Interpolation Correction (True Color Single only) ................................................................... 11
2.2.8 Effects of the interpolations ........................................................................................................... 11
2.3 Response & QE curves ........................................................................................................................... 12
2.3.1 Quantum Efficiency ........................................................................................................................ 12
2.3.2 Spectral Response .......................................................................................................................... 12
3 CAMERA HARDWARE INTERFACE ........................................................................................... 14
3.1 Mechanical Drawings............................................................................................................................. 14
3.2 Input/output Connectors and LED......................................................................................................... 15
3.2.1 Power Over CoaXPress ................................................................................................................... 16
3.2.2 Status LED Behaviour ...................................................................................................................... 16
3.2.3 Trigger Connector ........................................................................................................................... 17
4 STANDARD CONFORMITY ...................................................................................................... 18
4.1 CE Conformity ........................................................................................................................................ 18
4.2 FCC Conformity ...................................................................................................................................... 18
4.3 RoHs Conformity .................................................................................................................................... 18
5 GETTING STARTED ................................................................................................................. 19
5.1 Out of the box ........................................................................................................................................ 19
USER MANUAL ELIIXA+ 16K/8K CXP COLOR – REV G – 09/2016
5.2 Setting up in the system ........................................................................................................................ 19
6 CAMERA SOFTWARE INTERFACE ............................................................................................ 20
6.1 Control and Interface ............................................................................................................................ 20
7 Camera Commands ............................................................................................................... 21
7.1 Device Control ....................................................................................................................................... 21
7.2 Image Format ........................................................................................................................................ 22
7.2.1 Structure of the Sensor ................................................................................................................... 23
7.2.2 Test Image Pattern Selector ........................................................................................................... 23
7.3 Acquisition Control ................................................................................................................................ 24
7.3.1 External Triggers on GPIO Connector ............................................................................................. 25
7.3.2 CXP Trigger ...................................................................................................................................... 25
7.3.3 Scan Direction ................................................................................................................................. 26
7.3.4 Full Exposure Control Mode ........................................................................................................... 26
7.3.5 GenICam Triggers ........................................................................................................................... 28
7.3.6 Trigger Presets ................................................................................................................................ 29
7.3.7 Rescaler .......................................................................................................................................... 30
7.4 Digital I/O Control .................................................................................................................................. 32
7.5 Counters and Timers Control................................................................................................................. 33
7.5.1 Counters ......................................................................................................................................... 33
7.5.2 Timers ............................................................................................................................................. 35
7.6 Gain and Offset ...................................................................................................................................... 37
7.6.1 White Balance ................................................................................................................................. 39
7.7 Flat Field Correction .............................................................................................................................. 40
7.7.1 Automatic Calibration ..................................................................................................................... 43
7.7.2 Manual Flat Field Correction .......................................................................................................... 43
7.7.3 Save & Restore FFC ......................................................................................................................... 43
7.8 Statistics and Line Profile ....................................................................................................................... 44
7.9 Privilege Level ........................................................................................................................................ 45
7.10 Image Control ...................................................................................................................................... 45
7.11 Save & Restore Settings ....................................................................................................................... 46
APPENDIX ................................................................................................................................ 47
Appendix A. Test Patterns ........................................................................................................ 48
A.1 Fixed Horizontal Ramps ......................................................................................................................... 48
A.2 Color RGBW Fixed Pattern .................................................................................................................... 49
A.3 Vertical wave ......................................................................................................................................... 49
USER MANUAL ELIIXA+ 16K/8K CXP COLOR – REV G – 09/2016
Appendix B. Timing Diagrams ................................................................................................... 50
B.1 Synchronization Modes with Variable Exposure Time .......................................................................... 50
B.2 Synchronisation Modes with Maximum Exposure Time ....................................................................... 51
B.3 Timing Values ........................................................................................................................................ 51
Appendix C. Data Cables ........................................................................................................... 52
Appendix D. Lenses Compatibility ............................................................................................. 53
Appendix E. Frame Grabbers Compliance ................................................................................. 54
Appendix F. Revision History .................................................................................................... 55
USER MANUAL ELIIXA+ 16K/8K CXP COLOR – REV G – 09/2016
1 CAMERA OVERVIEW
1.1 Features
Cmos Colour Sensor :
16384 RGB Pixels, 5 x 5µm (Full Definition)
8192 RGB Pixels 10x10µm (True Colour)
Interface : CoaXPress® (4x 6Gb/sLinks)
Line Rate :
Up to 47500 l/s In 16k Full Definition Mode
Up to 95000 l/s in 8k True Colour Mode
Bit Depth : 24bits (RGB 8bits)
Scan Direction
Flat Field Correction
Low Power Consumption : <19W
Compliant with Standard Lenses of the Market
1.2 Key Specifications
Note : All values in LSB is given in 8 bits format
Characteristics
Typical Value
Unit
Sensor Characteristics at Maximum Pixel Rate
Resolution
16384 8192
RGB Pixels
pixel size (square)
5 10
µm
Max line rate
47.5 95
Radiometric Performance at Maximum Pixel Rate and minimum camera gain
Bit depth
3 x 8
Bits
Response non linearity
< 1
%
PRNU HF Max
3
%
Dynamic range
65
dB
Response (Peak) : True Color or Full Def. Enhanced
Red
11.8
LSB 8bits/(nJ/cm²)
Green
11.2
LSB 8bits/(nJ/cm²)
Blue
7.8
LSB 8bits/(nJ/cm²)
USER MANUAL ELIIXA+ 16K/8K CXP COLOR – REV G – 09/2016
1.3 Description
e2v’s next generation of line scan cameras are setting new, high standards for line rate and image quality.
Thanks to e2v’s recently developed multi-line CMOS technology, the camera provides an unmatched
95,000 lines/s and combines high response with an extremely low noise level; this delivers high signal to
noise ratio even when short integration times are required or when illumination is limited. The 5μm pixel
size is arranged in four active lines and dual line filter configuration allowing the camera to be operated in
several modes: True colour mode with 10μm RGB pixels to provide equivalent colour fidelity to 10μm pixel
tri-linear solutions with advanced immunity to web variation or Full definition mode with a unique16,384
RGB pixel resolution.
1.4 Typical Applications
Printing Inspection
High Resolution Document Scanning
Printed Circuit Board Inspection
Flat Panel Display Inspection
High Quality Raw material Surface Inspection
1.5 Models
Part Number
Definition / Max Speed
Details
EV71YC4CCP1605-BA0
16k/47.5kHz – 8k/95kHz
New Sensor Generation with Model Name
ELIIXA2C4CCP1605
Functionality (Programmable via GenICam Control Interface)
Analog Gain
Up to 12 (x4)
dB
Offset
-4096 to +4096
LSB
Trigger Mode
Timed (Free run) and triggered (Ext Trig, Ext ITC) modes
Sensor Modes
True Color Enhanced : 8192 RGB Pixels of 10x10µm
True Color Single : 8192 RGB Pixels of 10x10µm
Full Definition Enhanced : 16384 RGB Pixels 5x5µm
Full Definition Single : 16384 RGB Pixels 5x5µm
Mechanical and Electrical Interface
Size (w x h x l)
100 x 156 x 36
mm
Weight
700
g
Lens Mount
M95 x 1
-
Sensor alignment ( see chapter 4 )
±100
µm
Sensor flatness
±35
µm
Power supply
Power Over CoaXPress : 24
V
Power dissipation – Typ. while grabbing
< 19
W
General Features
Operating temperature
0 to 55 (front face) or 70 (Internal)
°C
Storage temperature
-40 to 70
°C
Regulatory
CE, FCC and RoHS compliant
USER MANUAL ELIIXA+ 16K/8K CXP COLOR – REV G – 09/2016
2 CAMERA PERFORMANCES
2.1 Camera Characterization
Unit
True Color (8k)
Full Definition Single
Enhanced Modes
Typ.
Max
Typ.
Max
Typ.
Max
Dark Noise RMS
LSB
0.12
1.2
0.11
1.2
0.12
1.2
Dynamic Range
-
2125:1
-
2125:1
-
2125:1
-
RMS Noise (3/4 Sat)
LSB
2.2
-
2.15
4
2.2
4
Full Well Capacity
e- (per color)
13650
-
13650
-
13650
-
SNR (3/4 Sat)
dB
40
-
40
-
40
-
Peak Response
(460/530/660nm)
LSB 8bits/
(nJ/cm2)
8/10/12
-
4/5/6
-
8/10/12
-
Non Linearity
%
0,3
-
0,3
-
0,3
-
Without Flat Field Correction :
FPN rms
LSB
0.21
1
0.23
1
0.22
1
FPN pk-pk
LSB
1
2
1
2
1
2
PRNU hf (3/4 Sat)
%
0.13
0,35
0.123
0,35
0.14
0,35
PRNU pk-pk (3/4 Sat)
%
1.1
3
1
3
1.25
3
Test conditions :
All values are given at Nominal Gain (0dB) : Preamp Gain x1, Amp Gain 0dB
Figures in LSB are for a 8bits format
Measured at exposure time = 400µs and line period = 400µs in Ext Trig Mode (Max Exposure Time)
Maximum data rate
USER MANUAL ELIIXA+ 16K/8K CXP COLOR – REV G – 09/2016
2.2 Image Sensor and color modes
The Eliixa+ Colour 16k sensor is
composed of two pairs of sensitive lines.
The Colour version has been completed
with RGB colour Filter and disposed as
detailed beside.
Each pair of lines uses the same Analog
to Digital Column converter (ADC
Column). An appropriate (embedded)
Time delay in the exposure between
each line this allows to combine two
successive exposures in order to double
the sensitivity of a single line.
This Time Delay Exposure is used only in
the Full Definition Enhanced mode (See
Below).
2.2.1 True Colour Enhanced Mode (TCE)
10µm Pixels (R,G,B)
Twice less pixels than B/W
Requires x3/2 the data flow of B&W
High Sensitivity True Color mode:
Equivalent to 6 x Pixels of 5µm (with
their respective colour filters).
“Full Exposure control” not needed in
TC as the TDI is not active (only
binning). The Exposure time can be
control as for a single line mode.
16384 Pixels
ADC Column
ADC Column
Intermediate Blind Pixel
Pixel Line A
Pixel Line B
Pixel Line C
Pixel Line D
Intermediate Blind Pixel
Web
Direction
Delay : 1 line
of 10µm
Double Green :
Vertical Binning
Double Red :
Vertical Binning
Double Blue :
Vertical Binning
Pixel 10µm
{RGB}
Double Green :
Vertical Binning
Green Pixels
averaging
USER MANUAL ELIIXA+ 16K/8K CXP COLOR – REV G – 09/2016
2.2.2 True Colour Single Mode (TCS)
10µm Pixels (R,G,B)
Twice less pixels than B/W
Requires x3/2 the data flow of B&W
Sensitivity Half of the TCE mode:
Equivalent to 6 x Pixels of 5µm (with
their respective colour filters).
“Full Exposure control” not needed in
TC as the TDI is not active (only
binning). The Exposure time can be
control as for a single line mode.
Not sensitive to the Scanning
direction and the variation of the
aspect ratio of the image.
2.2.3 Full Definition Single Mode (FDS)
5µm Pixels (R,G,B)
Same definition than B&W
Requires x3 the data flow of the B&W
Sensitivity is half of the TC mode
available : Equivalent to 3 x Pixels of
5µm (with their respective colour
filters).
“Full Exposure control” not needed in
this mode as the Time Delay Exposure
is not active. The Exposure time can
be control as for a single line mode.
Single Red
Single Blue
Pixel 10µm
{RGB}
One Pixel 10x10µm
grabbed
In the same time
Simple Green
Double Green
Web
Direction
Delay : 1 line
of 5µm
Single Green
Single Red
Single Blue
Blue or Red
Interpolated
(*)
Pixel 5µm
{RGB}
Single Green
Web
Direction
USER MANUAL ELIIXA+ 16K/8K CXP COLOR – REV G – 09/2016
2.2.4 Full Definition Enhanced Mode (FDE)
5µm Pixels (R,G,B)
Same definition than B&W
Requires x3 the data flow of the B&W
Sensitivity is the same as the TC mode
available : Equivalent to 6 x Pixels of
5µm (with their respective colour
filters).
“Full Exposure control” is activated in
this mode as the Time Delay Exposure
is active.
2.2.5 Color Interpolation in Full Definition modes.
This color mode (5µm) requires the indication of “Forward/Reverse” to the camera in order to manage the
delay between the two coloured lines.
Delay : 1 line
of 5µm
Double Green
TDE
Double Green
TDE
Double Red
TDE
Double Blue
TDE
Blue or Red
Interpolated
(*)
Pixel 5µm
{RGB}
Web
Direction
delay
5µm
5µm
G
1
G
2
G
3
G
4
B
1
R
2
B
3
R
4
Web
direction
R
2
G
1
B
1
R
2
G
2
B
1+
B
3
2
R
2+
R
4
2
G
3
B
3
R
4
G
4
B
3+
B
5
2
USER MANUAL ELIIXA+ 16K/8K CXP COLOR – REV G – 09/2016
2.2.6 Column Interpolation Correction (True Color only)
This interpolation is used to compensate the colour error in the Red or the Blue in case of a
vertical transition on the web : The Red of the blue value of each coloured pixel is corrected
if the variation between two neighbour green pixels is significant.
B
1
’ = α
B
x B
1
and α
B
is the blue correction, calculated with the variation (G
1
–G
2
)
R
2
’ = α
R
x R
2
and α
R
is the red correction, calculated with the variation (G
1
–G
2
)
This interpolation is available only for pixel size 10x10µm (True Color only)
It can be disabled by the customer. By default, it is enabled.
2.2.7 Line Interpolation Correction (True Color Single only)
This interpolation is used to compensate the colour error in the Red
or the Blue in case of a horizontal transition on the web in the same
“True Color” pixel : A line is memorized and the Red of the blue
value of each coloured pixel is corrected if the variation between
two consecutive green values (previous to next line) is significant :
B
1
’ = α
B
x B
1
and α
B
is the blue correction, calculated with the
variation (G
1
–G’
1
)
R
2
’ = α
R
x R
2
and α
R
is the red correction, calculated with the
variation (G
2
–G’
2
)
This interpolation is available only for pixel size 10x10µm (True Color Single only)
It can be enabled by the customer. By default, it is disabled
This interpolation requires the Forward/Reverse indication sent to the camera for the memorized line.
The Line Interpolation has to be disabled if the light is changing for each Line (typically for
pulsed Light source with different spectrum) or for any reason the Green component of
the light source changes significantly from one line to the next one.
2.2.8 Effects of the interpolations
Horizontal transition effect reduced by the “Line Interpolation”
Vertical transition effect reduced by the “Column Interpolation”
Magenta color ghosting
Green color ghosting
Red color
ghosting
Blue
color
ghosting
After both
column and Line
Interpolations
G
1
G
2
B
1
R
2
Vertical
G
1
G
2
B
1
R
2
G’
1
G’
2
B’
1
R’
2
Two consecutive
Lines
Horizontal
Previous
USER MANUAL ELIIXA+ 16K/8K CXP COLOR – REV G – 09/2016
2.3 Response & QE curves
2.3.1 Quantum Efficiency
2.3.2 Spectral Response
0
1
2
3
4
5
6
7
350 400 450 500 550 600 650 700 750 800 850 900 950 1000 1050 1100
(LSB 8-bit/(nJ/cm²))
Wavelength (nm)
Spectral response (Single Modes)
Blue
Green blue
Green red
Red
0%
10%
20%
30%
40%
50%
60%
350 400 450 500 550 600 650 700 750 800 850 900 950 1000 1050 1100
Wavelength (nm)
Quantum Efficiency
Blue
Green blue
Green red
Red
USER MANUAL ELIIXA+ 16K/8K CXP COLOR – REV G – 09/2016
0
2
4
6
8
10
12
14
350 400 450 500 550 600 650 700 750 800 850 900 950 1000 1050 1100
(LSB 8-bit/(nJ/cm²))
Wavelength (nm)
Spectral response (Enhanced Modes)
Blue
Green blue
Green red
Red
USER MANUAL ELIIXA+ 16K/8K CXP COLOR – REV G – 09/2016
3 CAMERA HARDWARE INTERFACE
3.1 Mechanical Drawings
Z
X
Y
The Step file is available on the
web :
www.e2v.com/cameras
USER MANUAL ELIIXA+ 16K/8K CXP COLOR – REV G – 09/2016
3.2 Input/output Connectors and LED
Sensor alignment
Z = -9.4 mm
±100µm
X = 9 mm
±100 µm
Y = 50mm
±100 µm
Flatness
±25 µm
Rotation (X,Y plan)
±0,1°
Tilt (versus lens mounting plane)
50µm
USB Connector
For Firmware
Trigger Connector
Multi-Colored LED
for Status and
diagnostic
CoaXPress
Connectors
USER MANUAL ELIIXA+ 16K/8K CXP COLOR – REV G – 09/2016
3.2.1 Power Over CoaXPress
The ELIIXA+ CXP is compliant with the Power Over CoaXPress : There is no Power connector as the power is
delivered through the Coaxial Connectors 1 and 2.
In the Standard, the Power Over CoaXPress allows to deliver 13W (under 24V) per Channel.
The ELIIXA+ CXP requires 19W then two connectors are required for the power : The two first are used for
this purpose.
If you want to Power ON the Camera you have to connect the Coaxial connector output 1 of the camera to
the coaxial connector 1 of the Frame Grabber.
Note 1 :
Only the connector 1 position is mandatory. They other 3 connectors can be inverted but the
camera still needs the 2 first connectors to get it power and be able to start up.
Note 2 :
Removing the 2 first connectors will shut down the Camera : You can reset the Camera by quickly
(
less than 1s
) connect/disconnect the Connector CXP1 but after a longer shut down, you’ll have to reboot
the PC with the Camera full connected to the frame grabber in order to synchronize the discovery of each
power line.
Note 3
: With some frame grabber you have access to a specific command (from the Frame Grabber
interface) for shutting down/up the power of the CoaxPress : This solution, with the complete reboot, is the
better solution to ensure a complete power On of the Camera.
3.2.2 Status LED Behaviour
The Power LED behavior detail is the following :
Colour and State
Meaning
Off
No power
Solid orange
System booting
Fast flash green Shown for a minimum of 1s even if
the link detection is faster
Link detection in progress
Slow flash alternate red / green
Device / Host incompatible
Slow pulse green
Device / Host connected, but no data being
transferred
Slow pulse orange
Device / Host connected, waiting for event (e.g.
trigger, exposure pulse)
Solid green whenever data transferred (i.e. blinks
synchronously with data)
Device / Host connected, data being transferred
500ms red pulse In case of multiple errors, there
shall be at least 200ms green before the next error is
indicated
Error during data transfer (e.g. CRC error, single bit
error detected)
Fast flash red
System error (e.g. internal error)
USER MANUAL ELIIXA+ 16K/8K CXP COLOR – REV G – 09/2016
3.2.3 Trigger Connector
Camera connector type: Hirose HR10A-7R-5SB or compliant
Cable connector type: Hirose HR10A-7P-5P (male) or compliant,
Provided with the Camera
IN1/IN2 are connected respectively to Line0/Line1 and allow to get external line triggers or the
forward/Reverse “Live” indication.
On the Connector side, the 120Ω termination is validated only if the input is switched in LVDS or RS422.
The electrical schematic is detailed below :
Signal
Pin
LVDS IN1+ / TTL IN1
1
LVDS IN1-
2
LVDS IN2+ / TTL IN2
3
LVDS IN2-
4
GND
5
1
2
3
5
5
4
Receptacle viewed from camera back
USER MANUAL ELIIXA+ 16K/8K CXP COLOR – REV G – 09/2016
4 STANDARD CONFORMITY
The ELIIXA+ cameras have been tested using the following equipment:
A shielded Trigger cable
A 10m CoaXPress Cable for the data transfer, certified at 6Gb/s
e2v recommends using the same configuration to ensure the compliance with the following standards.
4.1 CE Conformity
The ELIIXA+ cameras comply with the requirements of the EMC (European) directive
2004/108/CE (EN50081-2, EN 61000-6-2) (see next page).
4.2 FCC Conformity
The ELIIXA+ cameras further comply with Part 15 of the FCC rules, which states that: Operation is subject to
the following two conditions:
This device may not cause harmful interference, and
This device must accept any interference received, including interference that may cause undesired
operation
This equipment has been tested and found to comply with the limits for Class A digital device, pursuant to
part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environment. This equipment generates, uses
and can radiate radio frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio communications. Operation of this equipment
in a residential area is likely to cause harmful interference in which case the user will be required to correct
the interference at his own expense.
Warning: Changes or modifications to this unit not expressly approved by the party responsible for
compliance could void the user's authority to operate this equipment.
4.3 RoHs Conformity
ELIIXA+ cameras comply with the requirements of the RoHS directive 2011/65/EU.
USER MANUAL ELIIXA+ 16K/8K CXP COLOR – REV G – 09/2016
5 GETTING STARTED
5.1 Out of the box
The contains of the Camera box is the following :
One Camera ELIIXA+
Trigger connector (
Hirose HR10A-7P-5P-male or compliant)
There is no CDROM delivered with the Camera : This User Manual , and any other
corresponding documents can be dowlaoded on the Web site.
Main Camera page : www.e2v.com/cameras
Select the appropriate Camera Page (ELIIXA+)
5.2 Setting up in the system
The Compliant Lenses and their accessories are detailed in Appendix E
FOV
Focal Plan
Sensor Plan
f
L
w
s
w
f
FOV
L
=
USER MANUAL ELIIXA+ 16K/8K CXP COLOR – REV G – 09/2016
6 CAMERA SOFTWARE INTERFACE
6.1 Control and Interface
The ELIIXA+ CoaxPress Camera is compliant with GenICam 2.1 and the SFNC 1.5 standards.
This means that the Camera embeds its own definition and parameter description in an xml file.
Most of these Parameters are compliant with the SNFC. The specific parameters (non SNFC) are still
compliant with GenICam and can be detailed through the GenICam API process to the application.
The Frame Grabber software is supposed to propose a feature Brother, based on GenICam, which lists and
allows the modification of the parameters of the Camera.
This feature brother based on GenICam API uploads the xml file of the parameters description embedded in
the Camera.
Then the following description of the parameters and commands is based on the GenICam name of these
parameters. Behind each parameter is a register address in the Camera memory.
The mapping of these registers is not given in this manual because it can change from one version or the
firmware to the next one.
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55

e2v ELIIXA+ 8KCXP COLOR User manual

e2v
Brand
e2v
Model
ELIIXA+ 8KCXP COLOR
Category
Camera accessories
Type
User manual
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents