Electrolux DI80X User manual

Brand: Electrolux

Model: DI80X

Type: User manual

User’s Manual

This refrigetaror is not intended for use by persons

(including children) with physical, sensory or mental

impairments, or people with lack of experience and

knowledge, unless they have received regarding

the use of the refrigerator or under the supervision

of person responsible for their safety.

Its recommended that children be supervisioned

to ensure they are not playing with the refrigerator.

For Children

Prevent accidents. After unpa-

cking the refrigerator, keep the

packing material out of the reach

of children.

Do not allow your refrigerator

to be handled by children, even

when disconnected.

In case your refrigerator has any silica gel or Desi

Pak® pack inside, throw it away and do not let the

children play with it.

For the User / Installer

1. Safety

Safety .............................................................02

Installation .....................................................03

Description of the Refrigerator ...................04

How to Use ....................................................13

Cleaning and Maintenance ..........................16

Solving Problems .........................................20

Hints and Suggestions .................................22

Technical Information ..................................26

Table of contents

Disconnect the Refrigerator from the socket

whenever cleaning or doing maintenance.

Never disconnect the Refrigerator from the so-

cket by pulling the power cable. Use the plug.

If the power cord is damaged, do not try to x

it. It must be replaced by the tecnical service

or qualied professional in order to avoid a

hazard.

Do not store drugs, toxic or chemical products

in your Refrigerator, as they may contaminate

food items.

Products in high-pressure aerosol, identied

as ammable or with a small ame symbol

cannot be stored in the refrigerator or freezer

under risk of explosion.

Do not lean on the doors. The hinges may be-

come deregulated, affecting the refrigerator’s

sealing and compromising its performance.

Transport your refrigerator in vertical position

(standing). It is not recommended transporta-

tion in horizontal position.

IMPORTANT

Thank you for choosing Electrolux. In this manual

you will nd all the information for your safety and

proper use of your Fridge. Read all the instructions

before using the device and save it for further

references.

The identication label where all the information

about code, model, manufacturer and others, will

be used by the Technical Service in case your frid-

ge needs repairs. Do not remove it from its place.

Environmental Hints

The symbol on the product or on its packaging

indicates that this product may not

be treated as household waste.

Instead it shall be handed over to

the applicable collection point for

the recycling of electrical and elec-

tronic equipment. By ensuring this

product is disposed of correctly,

you will help prevent potential negative conse-

quences for the environment and human health,

which could otherwise be caused by inappropriate

waste handling of this product. For more detailed

information about recycling of this product, please

contact your local city ofce, your household waste

disposal service or the shop where you purchased

the product.

silica gel or

Desi Pak®

WARNING

Never place candles or incense

lighted over the Fridge, given the

risk of res or product damage.

2. Installation

Remove the base from the packing

With the help of other adults,

carefully recline the fridge to one

of the sides. With someone’s

help, break the base with your

hands. Tilt the refrigerator to the

other side and remove the rest

of the base.

In the back part remove the adhe-

sive tapes and unlock both back

spacers. Leave it in horizontal

position.

Choose the Location

Install your refrigerator in a ventilated location

away from direct sunlight and heat sources (stove,

ovens, etc.) and ammable products.

Do not install your refrigerator unsheltered (open

to weather).

For the denite position of the refrigerator, respect

the minimum distances recommended:

- On top: 10 cm

- Side: 10 cm

- Behind: 10 cm

Check if the spaces left in

the front of the fridge and

in the right side (looking

at the front of the fridge)

are enough to allow com-

plete opening of the door

and crisper drawer.

Leveling

Set the leveling feet to

ensure perfect refrigerator

stability, preventing rocking

movement. Leave frontal

casters rolling freely.

In order to perform the leveling feet must be com-

pletely on the oor.

To better close the door, the product must be

slightly reclined to the back.

The proper functioning of the refrigerator shall

depend on its perfect leveling.

WARNING

Leveling must be performed with closed

doors.

Your refrigerator was developed to use the

leveling feet, which come with it.

Therefore, do not use other feet other than

the original. There are wheels on the upper

back part of your refrigerator to facilitate

movement.

During packaging removal, the feeding cable

will be loose. To avoid damages, attach it

with adhesive tape in the back of the fridge.

After unpacking and leveling, wait at least

two hours before connecting your refrigera-

tor to prevent malfunctioning.

On top

Side

Behind

Electrical Installation

Before turning your fridge on re-

move the transparent protective

wrapping plastic applied on the

control panel in the freezer door.

Before connecting your refrige-

rator, check if the voltage on the

socket where it will be plugged

is equal to the one indicated on

the label next to the plug (on the

power cable) or on the refrigera-

tor ID label.

Be careful not to leave the refrige-

rator over the power cable.

Connect the refrigerator to an

exclusive socket. Do not use

extensions or T-connectors.

For your safety, request an elec-

trician of your trust to check the

condition of the electrical power

system at the location it will be

plugged and for further infor-

mation, contact the Technical

Service.

The socket wires where your

refrigerator will be connected

should be of copper and have

a minimum section of 2.5 mm².

3.Description of the Refrigerator

Parts

1. “Ice Twister” (DF80/DF80X) / Automatic Ice Maker

(DFI80/DI80X)

2. Ice storage recipient

3. “Drink Express” (DF80/DF80X)

4. Turbo freezing compartment (Turbo Freezer)

5. Retractile and small shelf of the freezer

6. Retractile and big shelf of the freezer

7. Freezer compartment light - 1 unit - (luminary)

8. Freezer door shelves (2 units)

9. Removable “Ice Stock”.

10. Cup support - “Frosty Cups” (2 units)

11. Space convenient compartment

12. Lights in the fridge compartment - 3 units - (luminary)

13. Temperature control selector in the fridge (DF80/

DF80X)

14. Removable glass shelve (2 per refrigerator)

15. Crisper drawer lid

16. Humidity Control

17. Crisper Drawer

18. Crisper Drawer sliding control

19. Leveling feet/ casters

20. Removable bin “Space+” (picnic)(DFI80/DI80X)

21. “Space Express”/“Gourmet Express”/“Drink Ex-

press” (DFI80/DI80X) Retractile Shelf (DF80/DF80X)

22. “Flex Box” shelf (2 per fridge)

23. Small multi-use shelf

24. Removable shelf for delicate fruits

25. Bottle holder shelve

26. Refrigerator door shelf (3 in models DF80/ DF80X)

and (2 in models DFI80/DI80X)

27. Bottles lock

28. “Space Light” removable shelf.

29. Water supply (DFI80/DI80X)

30. Removable can dispenser

31. Control Panel

32. Handles

33. Rotating water dispenser (DFI80/DI80X)

34. Water dispenser action button (DFI80/DI80X)

35. Deodorizer

36. Water lter element (DFI80/DI80X)

37. Retractile shelf of the fridge

38. Freezer door (not reversible)

39. Fridge door (not reversible)

40. Multi-Flow

41. Egg tray

42. Extra Crisper Drawer (DFI80/DI80X)

43. Extra Crisper Drawer cover (DFI80/DI80X)

44. Breakfast tray

WARNING

Do not use the refrigerator without connecting

the grounding wire.

Do not use the product without grounding it. If the

installation doesn’t have grounding, for your safety,

ask to a trusted electrician to provide it.

The grounding cable (green or yellow and green)

located at the back of your refrigerator must be

connected to an efcient grounding and should

not be connected directly to the electric power

network or to water and/or gas pipes, electricity,

telephone conduits, lightning rods, etc.

If your product is equipped with a 3-prong plug po-

wer cord, it will not have a grounding cable (green

or yellow and green). It must be plugged into a

properly grounded and polarized 3-prong outlet.

Do not use adaptor to bypass the grounding. Do

not replace it for a two prong plug. If necessary, for

your safety, ask to a trusted electrician to ground

your appliance.

Grounding is the best safety for the user against

electric discharges.

Ground Wire (Grounding)

Admissible voltage variation

Voltage (V) Minimum (V) Maximum (V)

127

220

116

201

133

231

Fio Terra (aterramento)

IMPORTANT

In case the voltage at installation site is out of

the indicated limits on Admissible Voltage Varia-

tion table, ask the dealer energy the adequacy

of voltage levels and adapt a voltage stabilizer

of not less than 2000 VA. If there is any, voltage

variation on site, outside the specied limits

(see table above) or a not constant energy su-

pply, the appliance may change in its operation.

If so, remove the plug for 5 minutes and then

reconnect it to the energy supply (check item

6 - Solving Problems - Pages 20 and 21).

Control Panel DF80 / DF80X

Control Panel DFI80 / DI80X

This panel has approximation mode. To set it,

place your hand rapidly over the control panel.

All Buttons will light up with 50% luminous intensity.

Button “GOURMET EXPRESS” (fast cooling

after desserts - models DFI80/DI80X)

By setting this button, it is selected the kind of dessert

expected to cool faster, during a predetermined time

for each dessert:

trie, cheesecake, mousse and pudding. In case you

wish to deactivate this function, you must touch the

screen “GOURMET EXPRESS” again until the indica-

tor shows room temperature.

Button “FRIDGE TEMPERATURE (models

DFI80/DI80X)

This button allows the adjustment of temperature in the

fridge compartment: Minimum, Medium and Maximum.

Intermediary adjustments to these positions can also

be performed.

Button “FREEZER TEMPERATURE”

This button allows the adjustment of temperature in

the freezer compartment: Minimum, Medium and

Maximum. Intermediary adjustments to these

positions can also be performed, in models (DFI80/

DI80X).

WARNING

The function “Drink Express” (Beverage Fast

Cooling) can experience changes to the beverage

nal temperature given the electric tension, room

temperature and beverage initial temperature.

Avoid opening the fridge door frequently when this

function is being used.

Button “DRINK EXPRESS” (Beverage fast

cooling)

By setting this button, it is selected the kind of drink

expected to cool faster, during a predetermined time for

each drink: In case you wish to deactivate this function,

you must press the button “DRINK EXPRESS” again

until the indicator shows two bars (- -) in models DF80/

DF80X and room temperature in models DFI80/DI80X.

For models DF80 and DF80X the beverages must be

in the Drink Express drawer at the freezer.

Indicator of Electronic Panel Locked

Indicates when the control panel is locked to avoid

changes to the settings.

To lock the control panel of models DFI80/DI80X

it must be pressed at the same time the buttons

FRIDGE TEMPERATURE and FREEZER TEM-

PERATURE for approximately 3 seconds.

To unlock, repeat the process.

To lock the control panel of models DF80/DF80X

it must be pressed at the same time the buttons

FREEZER TEMPERATURE and AUTO CONTROL

for approximately 3 seconds. To unlock, repeat the

process.

For these models, once the panel is locked “LOC” will

appear on the display.

Button “INTELLIGENT SENSOR” (DFI80/DI80X)

This button when set, will make the device stop oper-

ating in manual mode to operate in automatic mode.

Variations in room temperature will be considered

automatically, assuring the conservation properties in

food stored in the fridge.

With this function activated, it is not possible to set the

freezer temperature and the fridge temperature (the

buttons are blocked).

Indicator of FREEZING TURBO or BEVERAGES

FAST COOLING or DESSERT FAST COOLING time

(DFI80/DI80X)

In case one of the functions above has been chosen, the

indicator shows the operation remaining time.

For example: 30, 29, 28 minutes and so on until zero

(0:00). Should you wish to use the functions simultane-

ously (cool drinks and freeze food or party manner), the

counter will show the remaining time to conclude each

Dessert Indicator (DFI80/DI80X)

It shows which dessert was selected for fast cooling:

trie, cheesecake, mousse or pudding. The selection is

made by pressing the button “GOURMET EXPRESS”.

Indicators of Temperature Selection of Fridge

Compartment (DFI80/DI80X)

They indicate the temperature selected in the fridge

compartment.

The adjustment is made by pressing the button

FRIDGE TEMPERATURE.

When the fridge is turned on for the rst time, turned on

after cleaning or after blackout, the control will always

indicate medium position.

Temperature Selection Indicators of the

Freezer Compartment

They indicate the selected temperature in the freezer

compartment.

The adjustment is made by pressing the screen

FREEZER TEMPERATURE.

When the fridge is turned on for the rst time, turned

on after cleaning or after blackout, the control always

indicates medium position.

Beverage Indicator

Shows the drink selected for Rapid Cooling: cham-

pagne, beer or canned drinks (DF80/DF80X) or sodas,

champagne, beer and canned drinks (DFI80/DI80X).

The selection is made by pressing the screen “DRINK

EXPRESS”.

function with a respective display light for 30 seconds

and then remain alternating in-between functions until

one of them is concluded.

(DFI80/DI80X)

When no function is selected, the indicator in models

DFI80 and DI80X shows room temperature and in

models DF80 and DF80X the indicator will show two

bars (- -) moving up and down.

Button TURBO FREEZING:

Allows for faster food cooling or freezing. This function’s

operation time can be set to 30 minutes (minimum) and

up to 2 hours and 30 minutes (maximum).

Other periods that may be selected: 45 minutes, 1 hour,

1 hour and 30 minutes and 2 hours.

In case you wish to deactivate this function, you must

press the button TURBO FREEZING again until the

indicator shows (- -) in models DF80/DF80X or room

temperature in models DFI80/DI80X.

WARNING

The function TURBO FREEZING will not work in

case the function BEVERAGE FAST COOLING

is working or selected before (this information

is valid only for models DF80 and DF80X).

Indicator of High Temperature in the Freezer

and/or Fridge Compartment (DFI80/DI80X)

This indicator will turn on every time the Freezer and/or

Fridge compartment temperature is higher (hot) than

the proper temperature for storage.

We recommend not to perform freezer and/or fridge

load when the indicator of high temperature is on.

Keep temperature setting of freezer compartment at

maximum and wait a few minutes until the indicator is

off. In case this indicator remains on for a long period,

contact Technical Service.

Indicator of Water Filter Replacement (DFI80/

DI80X)

Indicates when the water lter expired and must be

replaced.

The lter must be purchased in the Technical Service.

After the lter replacement, by pressing at the same

time buttons PARTY and FRIDGE TEMPERATURE,

for approximately 3 seconds. This operation will turn

off the luminous indicator and will restart the 500 liters

count (lter useful life) of the new lter.

Indicator of Door Opened (DFI80/DI80X)

This indicator stays on as an alert while any of the doors

(refrigerator or freezer) remains open.

BUTTON/Function PARTY

The function, when selected, maintains the freezing

capacity at maximum, and cooling capacity for 6 hours,

even with several door openings. To activate this func-

tion by pressing the button “PARTY” once (DFI80/

DI80X) or press the button “AUTO CONTROL” twice

(DF80/DF80X). The function Party can be deactivated

at any time, by pressing the button “PARTY” (DFI80/

DI80X) or button “AUTO CONTROL” (DF80/DF80X).

Button/Function Shopping

The function, when selected, keeps the freezing capac-

ity at maximum, allowing a fast freezing and cooling

of new food.

The function Shopping has a duration of 3 hours,

although it can be deactivated at any time, by press-

ing the button “SHOPPING” (DFI80/DI80X) or button

“AUTO CONTROL” (DF80/DF80X). This function

activates open door alarm to start tinging only after

10 minutes.

WARNING

The water outlet in the dispenser will be interrupted

at the moment the Ice Maker is being relled.

Fill up only with potable water.

Button “ICE MAKER” (Automatic Ice Maker

– only in models DFI80 and DI80X)

By pressing this button, the ice maker is turned on and

the ice starts to be made automatically.

Make sure there is water in the water supply at all

times, so the ice can be made. The lack of water in

the water supply is indicated on

the display according to the pic-

ture. To deactivate the automatic

ice maker at any time, press the

button “ICE MAKER”.

To remove the “ rA “ from the display you must rell

the water supply, wait a few minutes so the water can

go through the lter and press the Button Ice Maker

again. The fact “ rA “ does not appear on the display

does exempt the lack of water from the water supply,

because the water use by the Water Dispenser is not

monitored by this alert.

Button/Function Vacation

The function Vacation, when selected keeps the free-

zer temperature at minimum for models DF80/DF80X

and the freezer temperature and fridge at minimum for

models DFI80/DI80X. This function is indicated when

the product remains closed for long periods of time.

During the rst 30 minutes, after the function is selec-

ted, the product can be opened without deactivating

this function. To deactivated this function at any time,

press the button “VACATION” in models DFI80/DI80X

and the button “AUTO CONTROL” in models DF80/

DF80X or open one of the doors for 30min, after the

function is selected.

Button “AUTO CONTROL” (Automatic Control)

DF80/DF80X

By pressing the button “AUTO CONTROL” it is pos-

sible to select one of the automatic control functions:

Vacation, Party and Shopping (DF80/DF80X).

Attention: If the function “AUTO CONTROL” is

selected, the functions TURBO FREEZING, “DRINK

EXPRESS”, “ICE EXPRESS” and FREEZER TEM-

PERATURE will not be selected, until the function

“AUTO CONTROL” is interrupted.

“AUTO CONTROL” indicators (Automatic Con-

trol - DF80/DF80X)

Shows the automatic control function selected.

21.1. Vacation

The function Vacation, when selected (pressing the but-

ton “AUTO CONTROL”, keeps the freezer temperature

at minimum. This function is indicated when the product

remains closed for long periods of time. During the rst

30 minutes, after the function is selected, the product

can be opened without deactivating this function. The

function Vacation can be deactivated at any time, by

pressing the button “AUTO CONTROL” or open any one

of the doors 30 minutes after the function is selected.

21.2. Party

The function, when selected (pressing the button “AUTO

CONTROL” twice), keeps the freezing capacity at most

for 6 hours, even with several door openings. The func-

tion Party can be deactivated at any time, by pressing

the button “AUTO CONTROL”.

21.3. Shopping

The function, when selected (pressing the button “AUTO

CONTROL” three times), keeps the freezing capacity at

most, allowing a fast freezing of new food. The function

Shopping has a duration of 3 hours, although it can be

deactivated at any time, by pressing the button “AUTO

CONTROL”.

With this function activated, the alarm of the door opened

starts to work after 10 minutes.

Button “ICE EXPRESS” (DF80/DF80X)

This Button allows the ice to be formed faster in the

freezer compartment. Make sure the ice trays in the

“Ice Twister” are lled with water. To deactivate this

function, press the button “Ice Express” at any time.

Indicator of Room Temperature (DFI80/

DI80X)

Indicates the room temperature where the fridge is

installed when no other function is being used.

Time Indicator (DFI80/DI80X)

Indicates in minutes the remaining time of a pre-

selected function.

Temperature Indicator (DFI80/DI80X)

Indicates the temperature in Celsius grade of a pre-

selected function.

The fridge has ve types of alarm:

26.1 Open door Alarm

After, approximately 4 minutes (normal operation) and 10

minutes (operating on shopping mode) with the door(s)

opened, the alarm goes on.

The alarm is automatically turned off when closing the

door. Note: In case of the doors remains opened, after

silence time is passed, the alarm goes on again.

26.2 TURBO FREEZING LONG Alarm

(Periods of 1:00h, 1:30h, 2:00h and 2:30h)

At the end of the time chosen for the TURBO FREEZ-

ING, the respective Button and the panel numbers will

be ashing for about 10 seconds.

To turn off, open and close the freezer door or activate

the respective button.

26.3 TURBO FREEZING SHORT Alarm

(Periods of 30 and 45 minutes)

At the end of the selected TURBO-FREEZE period, the

alarm will be triggered, sounding for about 1 minute. In

this case, if the door is not opened, an alert “bip” will

sound every minute. After the end of the operation, in

addition to the sound signal the respective Button will

be ashing in the control panel. To turn off the sound

and visual alarms, open and close the freezer door or

activate the respective button.

26.4 Beverage Fast Cooling Alarm (DRINK EX-

PRESS)

At the end of the pre-set period for the chosen drink

express cooling, the alarm will sound for one minute.

Remove all the beverages and close the door. If this

procedure is not followed, after 1 minute, 1 alert “bip”

will sound every minute. After the end of the operation,

in addition to the sound signal the respective Button will

be ashing in the control panel. To turn off the sound and

visual alarms, activate the respective Button or remove

the beverage and close the door.

26.5 Dessert Fast Cooling Alarm (GOURMET EX-

PRESS - mod. (DFI80/DI80X)

At the end of the pre-set period for the chosen dessert

express cooling, the alarm will sound for one minute.

After the end of the operation, in addition to the sound

signal the respective Button will be ashing in the control

panel. To turn off the sound and visual alarms, activate

the respective button. Remove the dessert and close

the fridge door. If this procedure is not followed, after 1

minute, 1 alert “bip” will sound every minute.

26.6 ICE EXPRESS Alarm (DF80/DF80X)

At the end of the chosen time for the ICE EXPRESS, the

respective Button and the panel numbers will be ash-

ing, for approximately 10 seconds. To turn off, open and

close the freezer door or activate the respective button.

Button “Water Dispenser Activator”

Pressing the Button and keeping it pressed, you can

serve water in a glass.

For this it is necessary to: a) The water dispenser

is opened; b) The electric panel is unlocked; c) The

reservoir is lled with potable water.

Turbo-freezing Compartment

This compartment allows a

faster foodstuff cooling. This

compartment is located in the

superior right area of your

freezer.

“Ice Twister” / Ice Trays (DF80/DF80X)

After removing it from its place, ll the “Ice Twister”

with water carefully so the ice

trays will not overow. Place

the “Ice Twister” correctly into

position. The water freezes

after a few hours. Gently, turn

the handle clockwise until the

cubes come loose and fall from

the ice recipient.

“Ice Maker” / Automatic Ice Maker (DFI

Fill the potable water supply on

the fridge door with and activate

the button “Ice Maker” located

in the control panel. The water

freezes after a few hours. the ice

will automatically fall into the ice recipient. This compart-

ment is located in the superior left area of your freezer.

Beverage Fast Cooling Drawer (DF

Place the bottle or can in this

drawer to cool your drink faster in

the freezer compartment (A) and

activate the function drink express

in the control panel (refer to sec-

tion “Tips and Advices” beverage

fast cooling table).

If you wish, you can use this dra-

wer to keep food in the fridge (B),

in this position, even activating

the function DRINK EXPRESS beverage fast cooling

will not occur.

Frosty Cups

Developed to store cups and

glasses, so they can be cooled at

the moment of use.

Space Convenience Compartment

This compartment is used to store

some food that require lower

storing temperature (near 0°C)

without freezing. Example: food

to be consumed or cooked in a

short period of time such as meat, sh, dessert and

similar. This compartment is located in the superior

right area of your fridge.

WARNING

Fill up only with potable water.

Fruits and Vegetables Drawer (DFI80/DI80X)

Compartment that does not allow

the cooled air to be directly in

contact with fruits and vegetables.

It provides the right humidity level to

an improved preservation.

For better preservation, always

keep fruits and vegetables stored

inside this compartment.

Retractile Shelf (DF

/DF

This shelf can be de-

tracted, allowing sto-

rage of larger objects

in your fridge, such as

jars and bottles.

To unlock them, push

the locks down (A) in

the lower part of the

shelf and then, push

it back (B).

Crisper Drawer with Sliding Control

Keep the humidity and freshness

of fruits and vegetables due to the

circulation of cool air not in direct

contact with the food.

For best conservation, keep the ve-

getables and fruits in this location.

You are provided with a fruit and

vegetable sliding control, to faci-

litate the food organization place

it on the right or left. In it, can also

be stored small packages of food.

Humidity Control

To Best store the food, there is a

humidity control in the crisper dra-

wers which regulates the airow.

When storing Leafy vegetables

it is recommended to reduce the

incoming air, displacing the Button

to the left, avoiding food dehydra-

tion. For fruits, we recommend increasing the airow.

When storing fruits and vegetables together, set the

Humidity Control to intermediary.

Delicate Fruits

The compartment has an incli-

nation system (A) and a handle

that facilitate its removal from the

product. Use this space to store

small fruits, such as grapes,

strawberry, etc.

This compartment is located in the central right area

of you fridge door.

Multi-Flow System

This system distributes cool

air for the cooling of food

items inside the refrigerator

compartment.

Attention: Always leave the

air outlets free to facilitate

cool air circulation and thus

improve food conservation.

Ice Stock

This compartment is able to store

ice made in the “Ice Twister”

(DF80/DF80X), automatic ice

maker (DFI80/DI80X), or store be-

verage bottles that do not freeze.

The compartment has a handle

that facilitate its removal from the product. This

compartment is located in the inferior right area of

your freezer door.

Removable Multi-use Shelves

These 3 shelves (2 in models,

DFI80 and DI80X) are used to

store several types of food,

adequate to the fridge tem-

perature.

Light Space

The compartment has a cover and

a handle that facilitate its removal

from the product. Ideal to store

light products. This compartment

is located in the superior right area

of your fridge.

Deodorizer

The deodorizer reduces inconve-

nient food or liquid odors.

It is installed on the upper part of

the refrigerator compartment.

To solve any doubts concerning

the cleaning of the deodorizer,

consult the section “Cleaning and

Maintenance”.

Egg Tray

The egg tray is removable and

has a handle for better movement

between the fridge, sink and table.

Its maximum capacity is of 18 eggs.

The egg tray is sent into the Crisper drawer.

Removable Can Dispenser

The can support is sent into the

Crisper drawer.

Especially developed for storing

350ml containers of your favorite

drinks.

You can remove it from the door

and take to the table for your

greater convenience.

The container-holder can be

mounted in two different posi-

tions: In the door (1) or in the

fridge “Space Express” compart-

ment (2) (DFI80/DI80X). It can

cool the cans faster at the same time, by only activating

the DRINK EXPRESS function in the Control Panel.

Position

Retractile Glass Shelves

This shelves can be detracted and folded, allowing

the storage of bigger objects in your fridge, such

as jars and cakes. To unlock them, push the locks

down (A) in the lower part of the shelves and then,

push it back.

If you wish, you still can fold it up.

Position 1

Position 2

Bottle Shelves and Locks

1. Bottle-holder Shelves:

The bottle-holder shelf accommo-

dates bottles of 3.3 liters.

2. Bottles lock:

The bottle lock has a function that

prevents bottles from shaking

loose on the shelf.

To use it, just t it onto the shelf and slide to the right or

left, as shown on the gure.

It can also be used to store small condiments or Milk

cartons in its interior.

Gourmet Express / Drink Express Compart-

ment (models DFI

and DI

This compartment was develo-

ped for fast cooling of desserts

and beverages within the fridge

compartment. It can be used with

trays, cans, bottles and, if you wish

even with the whole can support.

To use this compartment, open its

door, store the dessert or bevera-

ge you wish to cool fast, close the

door and select the type of dessert

to be cooled off through the Button

“Gourmet Express” or select the

type of beverage through the

button “Drink Express”. It is not

recommended to put desserts

and beverages at the same time.

In case you do not wish to use

this compartment for the functions

mentioned above, it can be used

as a regular shelf in the fridge,

you only need to place the cover

according to the pictures shown.

It is not recommended to use the

buttons Gourmet Express and

Drink Express in this position.

This compartment is located in the superior left area of

your fridge.

In case you wish to use this place as an extra cold

compartment to store some food that require lower tem-

perature (near 0ºC) close the lip, but do not activate the

buttons “Gourmet Express” and “Drink Express”.

WARNING

Do not put weight or recipients over the cover

“A” when it is opened.

Water Container (only for models, DFI

e DI

Developed to provide pure and healthy water,

given its exclusive ltering system.

Pure Filter

Fill it with potable water only

and wait the ltering to start.

Important: In the rst rell use

(lter element) the water can

present a ark aspect, due to the

activated coal black. It is requi-

red to conduct this rst ltering

with the container outside the

fridge, preferably in the sink, so the water with

dark aspect is disposed. Repeat this procedure

for 3 times (approximately 9 liters of water). This

procedure must be repeated at every rell

replacement (lter element). recommended to

replace the rell every 6 months or 500 liters. The

indicator of lter replacement will turn on after the

consumption of 500l of water.

How to Use the Water Container (only for

models, DFI

and DI

1. Detach the water tube of the container.

2. Remove the reservoir from the refrigerator’s

door, lifting and pulling it as

shown on the side drawing.

3. Fill the water container and

wait the ltration.

It is required the rst ltering

is made in a place the ltered

water can be described (for

instance, in the sink).

Repeat this procedure for 3

times (approximately 9 liters

of water).

This procedure must be repeated at every rell

replacement (lter element).

4. Place the water container in the position and

attach the water tube, pressing rmly down.

5. Open the cover of the superior area of the water

container, ll it up and wait the potable water

ltering process.

“Flex Box” Shelves

These two shelves are used to

store several types of food units

or small packages. To make the

access easy, they are remo-

vable. To facilitate the Access

use them in position 2 and after

using return them to position 1.

6. After this procedure, the ltering system can be

used normally.

7. To serve, open the dispenser rotating it, place a

glass in the water outlet located in the external

door of the fridge and activate the button (A)

located right above.

8. In order to avoid undesirable activations, turn

the dispenser and keep it closed (position 1).

WARNING

- Before using it for the rst time, wash the

reservoir with water and neutral soap to eli-

minate any residues. Refer to section “Water

Container Cleaning”, on page 16.

Use drinking water only. The use of any other

beverage can leave residues, taste or odor

in the container.

- The potable water reservoir should only be

lled when placed into its position on the

door. Water supply temperature shall not be

higher than 43ºC.

- Let the water cool for about 12 hours.

- It is possible to hear some noise from the

air entry when the water leaves the reservoir.

- For models DFI80 and DI80X it is possible

also to hear some noises made by the water

supply automatic system in the ice maker

and water dispenser.

- In case the water is not owing, press once

again the activating button. Keep the glass

under the water outow for a few moments

to ensure the water is completely collected

by the glass.

- Do not use gasied beverage such as soft

drinks. The drink may leak due to the gas

pressure.

Back Spacer

Avoid the fridge to touch the wall.

Keep the back spacers always in

position 1 (horizontal).

When transporting the fridge,

keep the spacer in position 2

(vertical). This will facilitate the

fridge passage through the door, for instance. Use an

adhesive tape to keep in position 2.

Bin “Space +” (Picnic) (DFI

/DI

The “Space +” bin is removable

and has two handles to improve

the movement between fridge,

sink, table, etc.

Breakfast tray

In this space it is possible to store

items such as cheese, yogurts,

butter, etc. which are regularly

taken to the table.

4. How to Use

How to turn your refrigerator on and off

To turn your refrigerator on or off, just connect or

disconnect the plug from the socket after checking

the product’s correct voltage.

Before turning the fridge on by the rst time, read

the instruction brochure placed in the door and

this entire manual carefully.

When turning the fridge off, wait 10 minutes

before turning it on again.

IMPORTANT

Loading/Replenishing

In the rst lling or after cleaning:

1. For better accommodation of recipients in the

freezer and refrigerator compartments, all shelves

can be removed and repositioned, and the freezer

and fresh food compartments removed.

2. Connect the refrigerator’s plug into the socket.

3. Leave it working for at least two hours before

storing any foodstuff inside.

4. Begin lling of the food items from the refrigerator

shelves, leaving the door shelves for last. It is im-

portant to respect the maximum load limit indicated

in the gure below.

5. After lling, set the temperature control to the most

suitable position, following the information of the

items “Freezer Electronic Temperature Control”

and Refrigerator Temperature Control”.

6. Do not put food on the air outlets, so the fridge

performance is not compromised.

Maximum Load Limits

The adjustment positions for freezer and fridge

temperature are pre-established at the manufac-

turer plant.

However, the temperature shall depend on the

conditions of the room temperature, foodstuff and

the rate at which the door is opened.

Therefore, be careful not to place foodstuff in such

manner that it blocks the air outlets and avoid

opening the door unnecessarily.

The fridge compartment of models DF80/DF80X

has independent temperature control located

inside and on top of the fridge. For adjustments,

refer to section “Manual Temperature Control of

the Fridge”.

Fine Adjustment of Temperature

Your fridge has been manufactured within in-

ternational Standards and has three levels of

temperature with pre-established values at the

manufacturer plant for models DF80/DF80X and

ve levels for models DFI80/DI80X, being able to

be adjustable (increase or decrease) according

to your need.

Should you wish to change them, you have the

Temperature Fine-Tuning option for the three/ve

levels as explained next.

Electronic Control of Freezer (DF

X/DFI

/DI

X) and Fridge

(DFI

/DI

X) Temperature

By pressing it successively,

the freezer temperature

will be selected as shown

below:

Electronic Control of Freezer and

Fridge Temperature

(Default Temperatures)

Freezer

Temperature

Fridge

Temperature

(DFI80/DI80X)

Adjust

-24ºC (cold max)

---

-20ºC (cold med)

---

-16ºC (cold min)

-1ºC (cold max)

1ºC

3ºC (cold med)

5ºC

8ºC (cold min)

Maximum

Medium

Minimum

1. To program this function (DF80/DF80X)

1.1. Press the button “AUTO CONTROL” and

select function VACATION and then, press

5 times the button “TEMP. FREEZER”. The

function indicator will turn on showing the latest

adjustment made. Temperature ne adjustment

set is valid for the 3 temperature levels of the

freezer compartment.

1.2. Setting Options:

To increase 0.5 ºC to the pre-established tem-

perature, press the button TEMP. FREEZER

until the function indicator shows 05.

To increase 1 ºC to the pre-established tempe-

rature, press the button TEMP. FREEZER until

the function indicator shows 10.

To decrease 0.5 ºC to the pre-established tem-

perature, press the button TEMP. FREEZER

until the function indicator shows 05 with a

dash on its left side.

To decrease 1 ºC to the pre-established tempe-

rature, press the button TEMP. FREEZER until

the function indicator shows 10 with a dash on

its left side.

To decrease 2.0 ºC to the pre-established tem-

perature, press the button TEMP. FREEZER

until the function indicator shows 20 with a

dash on its left side.

After three seconds without pressing any buttons,

the ne adjustment is nished.

2. To program this function (DFI80/DI80X)

2.1. Press at the same time the buttons “DRINK

EXPRESS” and “TEMP. FREEZER” until you

hears a sound alarm. The function indicator will

turn on showing the latest adjustment made.

The ne adjustment is valid for all ve levels

of freezer and fridge temperature.

2.2. Setting Options:

The rst number appearing on the display

(tens) corresponds to fridge temperature and

the second number (units) corresponds to

freezer temperature.

To increase 0.5ºC to the pre-established fridge

temperature press TEMP. FRIDGE until the

number 1 appears on the left side of the display.

To increase 0.5ºC to the pre-established freezer

temperature, press TEMP. FREEZER until

the number 1 appears on the right side of the

display.

To increase 1ºC to the pre-established freezer

temperature press TEMP. FREEZER until

the number 2 appears on the right side of the

display.

To increase 1ºC to the pre-established fridge

temperature press TEMP. FRIDGE until the

number 2 appears on the left side of the display.

To decrease -0.5ºC to the pre-established

freezer temperature press TEMP. FREEZER

until the number 3 appears on the right side of

the display.

To decrease 1.0ºC to the pre-established free-

zer temperature press TEMP. FREEZER until

the number 4 appears on the right side of the

display.

To decrease -0.5ºC to the pre-established

fridge temperature press TEMP. FRIDGE until

the number 3 appears on the left side of the

display.

To decrease 1.0ºC to the pre-established fridge

temperature press TEMP. FRIDGE until the

number 4 appears on the left side of the display.

To decrease 2.0ºC to the pre-established free-

zer temperature press TEMP. FREEZER until

the number 5 appears on the right side of the

display.

To decrease 2.0ºC to the pre-established fridge

temperature press TEMP. FRIDGE until the

number 5 appears on the left side of the display.

After three seconds without pressing any buttons,

the ne adjustment is nished.

Several freezer and fridge combinations can be

freely used, ex: 55, 32, 52, 33, 43, etc.

Fridge Manual Temperature Control

(DF

/DF

To properly control your

refrigerator’s temperatu-

re, consider the following

factors:

1. The quantity of food

stored.

2. The environment tem-

perature where the re-

frigerator is installed.

3. To get maximum, medium and minimum cold,

turn the “B” Button to the right or left until the

respective grading is align with the Gray round

part “A”.

Cleaning the Deodorizer

In case of a bad odor in the

freezer compartment and in the

refrigerator, act as follows:

1. Set the temperature control of

the refrigerator to MAXIMUM

for about an hour and return

to the former setting.

2. Then, remove the deodorizer

fron the upper part of the com-

partment of the refrigerator and carefully loosen

the deodorizer from inside the cover.

5. Cleaning and Maintenance

Before any maintenance opera-

tion, including those described

in this manual, disconnect the

refrigerator from the main power by

removing the plug from the socket.

Never clean your fridge with in-

ammable uids, such as alcohol, kerosene, thinner,

varsol, solvents or any other abrasive chemical pro-

ducts such as detergents, acids or vinegars in order

to not damage the polished protection and other parts.

After cleaning, replace the accessories supplied with

the refrigerator (drawers, shelves, etc) in their proper

places inside the refrigerator. In case any food item

is spilled inside the refrigerator, clean it immediately.

Many of these food items can damage or leave an

inconvenient odor on the internal refrigerator surfaces

if they stay un-cleaned for long.

Never use metallic spatulas, brushes, abrasives or

alkaline products to clean the plastic surfaces inside

your refrigerator.

Before cleaning the refrigerator, remember that wet

objects can easily stick to extremely cold surfaces.

Therefore, do not touch cold surfaces with cloths,

sponges or even your wet hands.

WARNING

The plastic parts cannot be washed with

hot water.

In case of not wanting to use the specic

functions of your refrigerator’s in the daily

basis, for example: Party, Shopping, Vaca-

tion, Auto Control, etc; you can regulate

your refrigerator according to the table

below.

Internal Part

Clean the inside of the refrigerator and the ac-

cessories with a warm water solution and sodium

bicarbonate (a soup spoon of bicarbonate for each

liter of water). Carefully dry it.

Automatic Ice Maker “Ice- Maker”

(DFI

/DI

The ice maker has a

stick (A) that checks if

there is ice formed in

the ice storage contai-

ner. When cleaning the

ice maker, this stick,

must not be forced at nay direction.

The ice maker is placed in the superior left area

of the freezer compartment.

3. Leave it in a clean water container for three hours.

4. Remove and leave the deodorizer at rest to dry for

2 hours and assemble it again.

5. The deodorizer should be changed after its third

cleaning.

6. It is recommended the use of a small screwdriver to

remove the part supporting the deodorizer.

Water Tubes Replacement (DFI

/DI

Your fridge allows the replace-

ment of the water tubes from

time to time, in order to maintain

the water purity at all times. It is

recommended the annual repla-

cement of the tubes.

Before using the automatic ice maker, it

is recommended to clean the water con-

tainer, according to item “Water Container

Cleaning”.

It is also recommended the disposal of the

rst ice cubes. This will assure the ice trays

and other parts in contact with the water

before turning to ice, are clean. Dispose at

least 30 ice cubes before using it.

IMPORTANT

Lights Replacement

To replace a light bulb in your

fridge, proceed as follows:

1. Turn the fridge off, by unplug-

ging the electrical power cord

from the wall outlet.

2. Remove the shelves in front

of the light lid (luminary).

3. Pull the luminary simulta-

neously with both hands until

it is completely loose (A).

4. Replace the used light bulb

with an equivalent one (same

dimensions, tension and

maximum Power of 25 W).

5. Reattach the luminary, rst

attaching the pins of one of

plastic cover ends (B) and

then, push the other end (C)

against the fridge wall, until it

is locked in the original position.

6. Attach the electrical power cord to the wall outlet.

1. Release the water tube

of the water container (1)

2. Remove the fridge door

container, lifting and

pulling according to the

picture (2).

3. Release the lateral locks

carefully (3).

4. Remove the main contai-

ner cover (4).

5. Remove the inside contai-

ner and remove the rell

carefully – lter element

(5).

6. Clean up all the parts (ex-

cept the rell) with warm

water and mild soap,

wash with running water.

7. Do not forget to reattach

the rubber seal cover from

the main container.

Water Container Cleaning (only for models

DFI80 and DI80X)

WARNING

Before removing the reservoir from the door,

completely empty it.

8. Install the rell (lter

element) in the in-

side container, and

make sure it is pla-

ced in a way to keep

the sealing between

the parts and close

the inside container.

9. Assemble the inside container in the main

container.

10. Attach the main container cover using lateral

locks.

11. Read the procedures on how to use the water

container (page.12).

WARNING

Do not wash the rell, given the risk of its

own contamination.

WARNING

Given the special polish applied in your

product to make cleaning easy, do not use

abrasive sponges, steel brushes, not even

special products to clean stainless steel,

pastes, sapolio and inflammable fluids,

such as, alcohol, kerosene, gas, varsol,

solvents car wax, polishers and other abra-

sive chemical products such as chlorine,

detergents, acids or vinegars.

The use of such products can damage

the polish protection and, subsequently,

stain and/or risk permanently the surface

of your fridge.

It is recommended to activate the function

LOCKED ELECTRONIC PANEL when per-

forming Control Panel cleaning to avoid

activating some functions accidentally.

External part

To easily clean the external

part of your refrigerator, use a

wet cloth in warm water and

neutral soap solution, and then

carefully dry.

The doors of models DF80X

and DI80X have special pro-

tector polish which avoids nger marks and

stains, use a dry annel or moist in warm water

with mild soap and then, dry it carefully.

WARNING

The door rubbers are attached and remo-

vable.

Door Rubber Seal

The sealing rubbers of the doors should be ca-

refully cleaned with a wet cloth, with care not to

damage them.

Water Collector and Condenser

Cleaning

Your fridge has a water

collector and a condenser

located in the back near

the compressor (motor).

The collector function is

to store water from the

automatic defrost, which evaporates through the

heat generated in this area.

The condenser function is to assist the refrige-

ration.

Cleaning the collector and condenser is recom-

mended every 6 months.

WARNING

Do not remove the fridge back cover

Do not throw water directly inside or outsi-

de the refrigerator.

Water Drop Collector Cleaning (models

DFI

and DI

1. Remove the drip pan from the

refrigerator door.

2. Dry the water whenever ne-

cessary.

3. Clean the drip pan and the

cover with warm water and

neutral soap.

4. Fit the drip pan cover on the

refrigerator door.

Automatic Ice Maker Cover and Ice Storage

Container (models DFI80 and DI80X)

To remove the cover, rst

pull the left side of the part

(A), displace it to the left

(B) until unlocking the right

side pin.

To remove the drawer, pull it

forward (C) and lift it at the

end of its course.

“Drink Express” (models DF80 and DF80X)

To remove “Drink Express”

press the safety locks down

(A) and pull it forward.

Hold “Drink Express” steady

in case it is loaded. This

lock exists in freezer and

fridge use.

How to remove accessories

Freezer Shelves:

The freezer glass shelves are removable, and

can be used according to your need. To remove

them, push the safety locks down (A), leave them

retracted (B), lift the shelves a little at the same

time and pull the set forward (C).

Door shelves:

Slightly lift it to remove it.

Water Container Cover (only for models, DFI80

and DI80X)

In order to remove it is required the prior removal

of the water container from the fridge door.

Removable Glass Shelves:

Remove by pulling the shelf

until it locks and lift it.

Glass shelves can be placed

in any position in the fridge,

except the glass shelf right

above the crisper drawer in

models DFI80/DI80X which

can only be placed in this

position.

Water Container (only for models DFI80 and

DI80X)

1.Detach the water tube of the

container.

2. Slightly lift and pull the

reservoir to remove it, ac-

cording to the side drawing.

6. Solving Problems

Customer Support

In case the refrigerator presents any malfunction, check for the possible causes and corrections.

• Connect the plug to the socket.

• Connect the product to the right tension.

• Correct the defect in the socket.

• Wait the Power to return, change the fuse or

turn on the switch.

• Remove the plug from the electric outlet for

5 minutes reconnecting it on sequence.

• Plug is off the socket.

• Product connected to different tension outlet.

• Bad contact socket

• Lack of electrical Power, off switch or burned

fuse.

• Power outage or voltage oscillation.

If the refrigerator

fails to work )

• Adjust the temperature correctly

• See “Installation – Choose Location”.

• Unblock the air outlet of Multi-Flow.

• See Electric Installation (page.3).

• Open only for the necessary time.

• Inadequate setting of the temperature control

of the refrigerator compartment.

• Direct sunlight or other heat sources close to

the refrigerator.

• Hindered air ventilation.

• Power supply with different tension than the

product’s.

• Excessive open door time.

If the Fridge is not

Cooling

(Insufcient

Refrigeration)

• Set temperature control properly.

• Reposition food items.

• Dry them before keeping.

• Inadequate setting of the temperature control

of the refrigerator compartment.

• Food items to close to air outlets.

• Food items to wet.

Food frozen in

the refrigerator

compartment

• Close both doors. In case you wish more

time with open door(s), select function SHO-

PPING.

• See Electric Installation (page.3).

• End of programmed function. Open the doors

or press the button ashing

• Door open

• Power supply with different tension than the

product’s.

• Turbo Freezing / Drink Express / Gourmet

Express / Ice Express.

Alarm sounding

• Adjust seals and water connections properly.• Water leaking from the reservoir.

Leak in the water con-

tainer (only DFI80 and

DI80X).

• Call the Technical Service.• Failure of a refrigerator function

Function indicator

messages

• Rell the container with potable water.

• Activate button “Ice maker”.

• Place the container in its original position.

• There is no water in the water compartment.

• Button “Ice Maker” deactivated.

• Ice container is not in position.

The ice is not automa-

tically made (models

DFI80/DI80X)

• Unlock the control panel according to instruc-

tions on page 6. With the control panel locked

the dispenser will not release water.

• Control panel locked.

Control panel but-

tons are not accep-

ting commands.

Probable Causes/Corrections

• Remove the plug from the electric outlet for

5 minutes reconnecting it on sequence.

• Power outage or voltage oscillation.

Touching the buttons

sound signal is not

emitted. The alarm

does not go off. TUR-

BO FREEZING/“DRINK

EXPRESS”/ “GOUR-

MET EXPRESS”

Page is loading ...

Electrolux DI80X User manual

Brand: Electrolux

Model: DI80X

Type: User manual

Download PDF

report

in other languages

español: Electrolux DI80X Manual de usuario

Electrolux DI80X User manual

Electrolux DI80X User manual

in other languages

Related papers

Other documents