Whirlpool WM1550 W User guide

Type
User guide

This manual is also suitable for

15
INSTRUCTIONS FOR USE
BEFORE USING THE APPLIANCE
SAFEGUARDING THE ENVIRONMENT
PRECAUTIONS AND GENERAL
RECOMMENDATIONS
HOW TO OPERATE THE REFRIGERATOR
COMPARTMENT
HOW TO OPERATE THE FREEZER
COMPARTMENT
HOW TO CLEAN THE REFRIGERATOR
COMPARTMENT
CLEANING AND MAINTENANCE
TROUBLESHOOTING GUIDE
AFTER-SALES SERVICE
INSTALLATION
DOOR REVERSIBILITY
ELECTRICAL CONNECTION
33502008GB.fm Page 15 Tuesday, November 17, 2009 7:19 PM
16
BEFORE USING THE APPLIANCE
SAFEGUARDING THE ENVIRONMENT
Your new appliance is designed to be used in
the household and similar applications such as:
- kitchen areas in shops, offices and other
working environments
- farm houses
- by clients in hotels, motels, residences, bed
& breakfasts.
To ensure best use of your appliance,
carefully read the operating instructions
which contain a description of the product
and useful advice.
Keep these instructions for future
reference.
1. After unpacking the appliance, make sure it is
not damaged and that the door closes properly.
Any damage must be reported to the dealer
within 24 hours of delivery of the appliance.
2. Wait at least two hours before switching the
appliance on in order to ensure that the
refrigerant circuit is fully efficient.
3. Installation and electrical connection must be
carried out by a qualified technician according
to the manufacturer’s instructions and in
compliance with local safety regulations.
4. Clean the inside of the appliance before using it.
1. Packaging
The packing material is 100% recyclable and
bears the recycling symbol. For disposal, comply
with local regulations. Keep the packing
materials (plastic bags, polystyrene parts, etc.)
out of the reach of children, as they are a
potential source of danger.
2. Scrapping/Disposal
The appliance is manufactured using recyclable
material.
This appliance is marked in compliance with
European Directive 2002/96/EC on Waste
Electrical and Electronic Equipment (WEEE).
By ensuring the correct disposal of this
appliance, you can help prevent potentially
negative consequences for the environment and
health.
The symbol on the appliance, or on the
accompanying documents, indicates that this
appliance should not be treated as domestic
waste but must be taken to a special collection
centre for the recycling of electrical and
electronic equipment.
When scrapping the appliance, make it unusable
by cutting off the power cable and removing the
doors and shelves so that children cannot easily
climb inside and become trapped.
Scrap the appliance in compliance with local
regulations on waste disposal, taking it to a
special collection centre; do not leave the
appliance unattended even for a few days, since
it is a potential source of danger for children.
For further information on the treatment,
recovery and recycling of this product, contact
your competent local office, the household
waste collection service or the shop where you
purchased the appliance.
Information:
This appliance does not contain CFCs.
The refrigerant circuit contains R134a (HFC) or
R600a (HC) (see the rating plate inside the
appliance).
Appliances with Isobutane (R600a): isobutane is
a natural gas with low environmental. Caution is
required, however, since isobutane is
flammable. Therefore, it is essential to ensure
that refrigerant pipelines are not damaged.
This product may contain Fluorinated
Greenhouse Gases covered by the Kyoto
Protocol; the refrigerant gas is inside a
hermetically sealed system.
Refrigerant gas: R134a has a Global Warming
Potential of (GWP) 1300.
Declaration of conformity
This appliance has been designed for preserving
food and is manufactured in compliance with EC
Regulation No. 1935/2004.
This appliance has been designed, manufactured
and marketed in compliance with:
safety objectives of the “Low Voltage”
Directive 2006/95/EC (which replaces
73/23/CEE and subsequent amendments);
the protection requirements of Directive
“EMC” 2004/108/EC.
Electrical safety of the appliance can only be
guaranteed if it is correctly connected to an
approved earthing system.
33502008GB.fm Page 16 Tuesday, November 17, 2009 7:19 PM
17
PRECAUTIONS AND GENERAL
RECOMMENDATIONS
INSTALLATION
The appliance must be handled and installed
by two or more persons.
Be careful not to damage the floors (e.g.
parquet) when moving the appliance.
During installation, make sure the appliance
does not damage the power cable.
Make sure the appliance is not installed near a
heat source.
To guarantee adequate ventilation, leave a
space on both sides and above the appliance
and follow the installation instructions.
Keep the appliance ventilation openings free.
Do not damage the appliance refrigerant
circuit pipes.
Install and level the appliance on a floor strong
enough to take its weight and in a place
suitable for its size and use.
Install the appliance in a dry, well ventilated
place. The appliance is designed to operate in
areas where the temperature comes within
the following ranges, according to the climatic
class given on the rating plate.
The appliance may not work properly if it is
left for a long time at a temperature outside
the specified range.
Make sure the voltage specified on the rating
plate corresponds to that of your home.
Do not use single/multi adapters or extension
cords.
For the water connection, use the pipe
supplied with the new appliance; do not reuse
that of the previous appliance.
Power cable modification or replacement
must only be carried out by qualified
personnel or After-sales Service.
It must be possible to disconnect the
appliance from the power supply by
unplugging it or by means of a mains two-pole
switch installed upline of the socket.
SAFETY
Do not use the appliance to store aerosol cans
or receptacles containing propellants or
flammable substances.
Do not store or use petrol, flammable liquids
or gas in the vicinity of this or other electrical
appliances. The fumes can cause fires or
explosions.
Do not use mechanical, electric or chemical
means other than those recommended by the
Manufacturer to speed up the defrost process.
Do not use or place electrical devices inside
the appliance compartments if they are not of
the type expressly authorised by the
Manufacturer.
This appliance is not intended for use by
persons (including children) with reduced
physical, sensory or mental capabilities or lack
of experience and knowledge, unless they
have been given supervision or instruction
concerning use of the appliance by a person
responsible for their safety.
To avoid the risk of children becoming
trapped and suffocating, do not allow them to
play or hide inside the appliance.
Do not swallow the contents (non-toxic) of
the ice packs (in some models).
Do not eat ice cubes or ice lollies immediately
after taking them out of the freezer since they
may cause cold burns.
USE
Before carrying out any maintenance or
cleaning operation, unplug the appliance or
disconnect it from the power supply.
All appliances equipped with an automatic
icemaker and water dispenser must be
connected to a water supply that only delivers
drinking water (with mains water pressure of
between 0.17 and 0.81 Mpa (1.7 and 8.1 bar)).
Automatic ice-makers and/or water dispensers
not directly connected to the water supply must
be filled with drinking water only.
Use the refrigerator compartment only for
storing fresh food and the freezer
compartment only for storing frozen food,
freezing fresh food and making ice cubes.
Do not store glass containers with liquids in
the freezer since they may burst.
The Manufacturer declines any liability if
the above advice and precautions are not
respected.
Climatic Class Amb. temp.
(°C)
Amb. temp.
(°F)
SN From 10 to 32 From 50 to 90
N From 16 to 32 From 61 to 90
ST From 16 to 38 From 61 to 100
T From 16 to 43 From 61 to 110
33502008GB.fm Page 17 Tuesday, November 17, 2009 7:19 PM
18
HOW TO OPERATE THE REFRIGERATOR
COMPARTMENT
This appliance is a refrigerator with a star freezer
compartment.
Defrosting of the refrigerator compartment is completely
automatic.
Switching on the refrigerator for the first time
Insert the plug into the mains socket.
The thermostat is used to adjust the temperature of both
compartments: refrigerator and freezer.
How to adjust the temperature of the compartments:
1. For correct operation and optimum storage of food, follow
instructions given in the enclosed product sheet for
thermostat adjustment.
2. To adjust the temperature in the refrigerator compartment,
set the thermostat control knob to:
•lowest/MIN numbers for the LEAST COLD internal
temperatures;
•highest/MAX numbers for the COLDEST internal
temperatures.
Thermostat set to 0: no operation, no light.
3. Press the corresponding button (fig. G) to activate the anti-
condensation device.
Note:
The ambient air temperature, frequency of door opening and the
position of the appliance can affect internal temperatures. These
factors must be taken into account when setting the thermostat.
How to use the refrigerator compartment
Position the food as illustrated in the figure.
A. Cooked food
B. Fish, meat
C. Fruit and vegetables
D. Bottles
E. Eggs
F. Butter, cheese and dairy products
Attention:
The space between the shelves and the rear wall of the
refrigerator compartment must be unobstructed to allow
circulation of air.
Do not place food in direct contact with the rear wall of the
refrigerator compartment.
Do not place hot food in the refrigerator or freezer.
Store liquids in closed containers.
Storing vegetables with a high water content can result in
condensation in the crisper drawer: this will not affect the
correct operation of the appliance.
Important:
Storing vegetables with high water content can cause
condensation to form on the glass shelf of the crisper
drawer: this will not affect the correct operation of the
appliance.
Fig. G
On models with
anti-condensation
device
33502008GB.fm Page 18 Tuesday, November 17, 2009 7:19 PM
19
HOW TO OPERATE THE FREEZER
COMPARTMENT
The freezer is a star compartment.
This compartment can be used to store frozen foods for the
period of time indicated on packaging.
The quantity of fresh food that can be frozen in 24 hours is
shown on the rating plate.
Important:
Before freezing, wrap and seal fresh food in:
aluminium foil, cling film, air and water-tight plastic bags,
polythene containers with lids or freezer containers suitable
for freezing fresh food.
In the event of a power cut, the freezer compartment will
maintain a sufficiently low temperature for food storage.
However, it is advisable to avoid opening the compartment
door during such periods.
Important:
The table alongside shows the recommended maximum
storage time for frozen fresh foods.
When purchasing frozen food products:
Ensure that the packaging is not damaged (frozen food in
damaged packaging may have deteriorated). If the package is
swollen or has damp patches, it may not have been stored
under optimal conditions and defrosting may have already
begun.
When shopping, leave frozen food purchases until last and
transport the products in a thermally insulated cool bag.
Place the items in the freezer compartment as soon as you get
home.
If food has defrosted even partially, do not re-freeze it.
Consume within 24 hours.
Avoid, or reduce temperature variations to the minimum.
Respect the best-before date on the package.
Always observe the storage guidelines on the frozen food
packages.
Making ice cubes
Fill the ice cube tray 3/4 with water and place it at the bottom
of the freezer compartment.
If the tray sticks to the bottom of the compartment, do not use
pointed or sharp instruments to detach it.
MONTHS FOOD
33502008GB.fm Page 19 Tuesday, November 17, 2009 7:19 PM
20
HOW TO CLEAN THE REFRIGERATOR
COMPARTMENT
Before any cleaning or maintenance operation, always
unplug the appliance or disconnect it from the power
supply.
Defrosting of the refrigerator compartment is
completely automatic.
Droplets of water on the rear wall of the refrigerator
compartment indicate that the periodic automatic defrost cycle
is in progress.
The defrost water is automatically routed to a drain outlet and
into a container from which it evaporates.
Clean the defrost water drain outlet regularly.
Defrosting the low temperature compartment
Defrost the low temperature compartment once or
twice a year or when the ice formation is excessive.
It is perfectly normal for ice to form. The amount of ice
which forms and the rate at which it accumulates will
depends on room temperature and humidity, and on the
frequency with which the door is opened. Ice formation
is concentrated at the top of the compartment and does
not affect the efficiency of the appliance.
If possible, defrost the freezer when it is nearly empty.
Remove the food from the freezer, wrap in newspaper and
group together in a cool place or in a portable cooler.
Leave the door open to allow the frost to melt.
Clean the interior with a sponge soaked in warm water and/
or neutral detergent. Do not use abrasive substances.
Rinse the interior and dry thoroughly.
Put the food back into the freezer.
Close the door.
Plug in the appliance once again.
Switch the appliance on.
33502008GB.fm Page 20 Tuesday, November 17, 2009 7:19 PM
21
CLEANING AND MAINTENANCE
Before any cleaning or maintenance operation, always unplug the appliance or disconnect it
from the power supply.
Periodically clean the inside of the refrigerator compartment with a sponge dampened in warm water
and/or neutral detergent. Rinse and dry with a soft cloth.
Do not use abrasive products.
The separators must not be washed in water but simply cleaned with a damp sponge.
Clean the inside of the freezer compartment when defrosting.
Clean the air vents and condenser at the rear of the appliance regularly with a vacuum cleaner or
brush.
Clean the outside with a soft damp cloth. Do not use abrasive products, scourers, stain-removers
(e.g. thrichlorethylene acetone) or vinegar.
Prolonged disuse
1. Empty the refrigerator.
2. Disconnect the appliance from the mains power supply.
3. Defrost and clean the interior.
4. In the event of prolonged disuse, leave the door open to prevent mould, odours and oxidation from
forming.
5. Clean the appliance.
Clean the inside of the low temperature compartment (where fitted) when defrosting.
Clean the inside of the refrigerator compartment regularly with a sponge dampened in warm water
and/or neutral detergent. Rinse and dry with a soft cloth. Do not use abrasive products.
6. Clean the outside with a damp cloth. Do not use abrasive products, scourers, stain-removers (e.g.
acetone, trichloroethylene) or vinegar.
Replacing bulbs:
When replacing the bulb, proceed as follows:
Unplug the appliance from the mains
Press the top of the lamp cover.
Remove the lamp cover.
Replace the lamp with one of the same power or of the max. power in watt, specified near the lamp
holder.
Put the lamp cover back on and wait 5 minutes before plugging the appliance back into the mains.
33502008GB.fm Page 21 Tuesday, November 17, 2009 7:19 PM
22
TROUBLESHOOTING GUIDE
When you hear these noises
1. The appliance is not working.
Is there a power failure?
Is the plug properly inserted in the socket?
Is the double-pole switch on?
Do the household electrical system protection
devices work correctly?
Is the power cord damaged?
2. Temperature inside the compartments is
not low enough.
Are the doors closed properly?
Is the appliance installed near a heat source?
Are the air circulation vents blocked?
3. Water collects at the bottom of the
refrigerator compartment.
Is the defrost water drain blocked?
4. The inside light is not working.
Check point 1 first, then:
Disconnect the appliance from the mains
power supply.
Replace the lamp with one of the same power
or of the max. power in watt, specified near the
lamp holder
5. Excessive frost build-up in the freezer
compartment.
Is the door shut properly?
Is food obstructing proper door closure?
Gurgling and hissing noises due to expansion
in the refrigerant circuit are normal.
..your appliance is alive!!!
33502008GB.fm Page 22 Tuesday, November 17, 2009 7:19 PM
23
AFTER-SALES SERVICE
Before contacting the After-Sales Service:
1. See if you can solve the problem yourself (see
“Troubleshooting guide”).
2. Switch the appliance off and then on again to
see if the problem has been solved. If it has not,
switch off the appliance again and repeat the
operation after one hour.
3. If the problem persists after this course of
action, contact After-sales Service.
Specify:
the nature of the fault,
the model,
The Service number (the number after the
word SERVICE on the rating plate inside the
appliance),
Your full address,
Your telephone number and area code.
Note:
The direction of door opening can be changed.
If this operation is performed by After-sales
Service it is not covered by the warranty.
The door cannot be reversed on models with
front handle.
INSTALLATION
Install the appliance away from heat sources. Installation in a
hot environment, direct exposure to the sun or installation
near heat sources (heaters, radiators, cookers) will increase
power consumption and should therefore be avoided.
If this is not possible, the following minimum distances must
be respected:
30 cm from coal or paraffin stoves;
3 cm from electric and/or gas stoves.
To optimize appliance efficiency, leave a 5 cm gap above the
appliance and make sure that adjacent kitchen units are
sufficiently distanced to allow air circulation.
Install the appliance in a dry, well-ventilated place, and ensure
it is level, using the front adjustment feet if necessary.
Clean the interior.
Fit the accessories.
Electrical connection
Electrical connections must be made in accordance
with local regulations.
Voltage and power consumption are indicated on the rating
plate inside the appliance.
Regulations require that the appliance be
earthed.
The manufacturer declines all liability for injury to
persons or animals and for damage to property
resulting from failure to observe the above procedures
and reminders.
If the plug and socket are not of the same type, have the
socket replaced by a qualified electrician.
Do not use extension leads or adapters.
Disconnecting the appliance
It must be possible to disconnect the appliance by unplugging it
or by means of a two-pole switch fitted upline of the socket.
33502008GB.fm Page 23 Tuesday, November 17, 2009 7:19 PM
24
DOOR REVERSIBILITY
The direction of door opening of your refrigerator and
freezer can be changed.
Make sure that the refrigerator and freezer are not
connected to the power supply and that they are empty.
Reversing the direction of door opening is a task which
requires two people.
Tools required
Phillips style screwdriver
Flat bladed screwdriver
8 mm and 10 mm socket or spanner.
Lay the fridge-freezer on its back in order to gain access to
the base, being careful not to tip it back by more than 45º.
Rest it on the soft foam packaging or similar material to avoid
damaging the cooling pipes at the rear of the appliance.
Remove the two screws on the rear of the fridge-freezer.
Lift the top off the fridge-freezer.
Use the 8mm socket or spanner to remove the 2 hinge bolts.
Remove the 2 bolts from the opposite side.
Remove the bracket and plastic surround.
Remove and replace the pin in the bracket.
Refit on the opposite side of the fridge-freezer cabinet.
Remove the blanking plug from the new hinge side and refit it
on the opposite side.
33502008GB.fm Page 24 Tuesday, November 17, 2009 7:19 PM
25
Remove the levelling feet by unscrewing.
Remove the bottom bracket using an 8 mm socket or spanner.
Remove and replace the pin, using a 10 mm socket to unscrew the
nut and a flat bladed screwdriver to remove the pin. You may
need to push the pin through from the underside to remove fully.
Remove the screw on the base and refit it on the other side.
Remove the blanking plates from the unused side of the fridge-
freezer and refit them in the holes left by the brackets.
Replace the door and brackets in reverse order.
When replacing the feet take care to ensure the larger foot is on
the side without the bracket.
Check the door is aligned horizontally and vertically and that the
seal fits properly all around before tightening the bottom hinge.
Note:
The direction of door opening can be changed. If this
operation is performed by After-sales Service it is not
covered by the warranty.
Reversing the Inside Compartment Door
1. Remove the screw from the door support pin on the bottom
right hand side.
2. Remove the plug from the left hand side.
3. Remove the two screw covers on the left hand side.
4. Loosen the two screws
5. Refit everything on the opposite side.
3-4
2
1
33502008GB.fm Page 25 Tuesday, November 17, 2009 7:19 PM
26
ELECTRICAL CONNECTION
1) For Great Britain only
Warning - this appliance must be earthed
Fuse replacement
If the mains lead of this appliance is fitted with a BS 1363A
13amp fused plug, to change a fuse in this type of plug use an
A.S.T.A. approved fuse to BS 1362 type and proceed as follows:
1. Remove the fuse cover (A) and fuse (B).
2. Fit replacement 13A fuse into fuse cover.
3. Refit both into plug.
Important:
The fuse cover must be refitted when changing a fuse and if the
fuse cover is lost the plug must not be used until a correct
replacement is fitted.
Correct replacement are identified by the colour insert or the
colour embossed in words on the base of the plug.
Replacement fuse covers are available from your local electrical
store.
2) For the Republic of Ireland only
The information given in respect of Great Britain will frequently
apply, but a third type of plug and socket is also used, the
2-pin, side earth type.
3) Socket outlet / plug (valid for both countries)
If the fitted plug is not suitable for your socket outlet, please
contact Whirlpool Service for further instruction. Please do not
attempt to change plug yourself. This procedure needs to be
carried out by a qualified Whirlpool technician in compliance
with the manufactures instructions and current standard safety
regulations.
33502008GB.fm Page 26 Tuesday, November 17, 2009 7:19 PM
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12

Whirlpool WM1550 W User guide

Type
User guide
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI