Panasonic RXVT80 Operating instructions

Category
CD players
Type
Operating instructions
RQT7801-1G
GC GU GS
Before connecting, operating or adjusting this product, please read
these instructions completely.
Please keep this manual for future reference.
The illustrations show the silver model.
Table of contents
Supplied accessories ..........................................2
Precautions...........................................................2
Attaching or detaching the speakers .................3
Use of batteries ....................................................3
The remote control...............................................3
Connection ...........................................................4
Control guide........................................................5
CDs........................................................................6
CD selection................................................................6
Basic play....................................................................6
Television OSD indicators (On Screen Display) .........7
CD display...................................................................7
Resume play ...............................................................7
Zoom function .............................................................7
CD Play Modes ...........................................................8
Program play...............................................................8
A-B repeat ...................................................................8
To find a particular scene using a
video index number...................................................9
To find a particular scene using
the time (TIME ACCESS)..........................................9
Multi screen functions .................................................9
Using menus to play MP3 discs ................................10
The radio.............................................................11
To improve reception ................................................11
Tapes...................................................................11
Recording ...........................................................12
Recording tips ...........................................................12
Recording through the built-in microphone (MIC) .....12
Equalizer .............................................................13
Using an external unit........................................13
Maintenance .......................................................13
Using headphones .............................................13
Specifications.....................................................13
Troubleshooting guide .......................Back cover
Operating Instructions
Portable Stereo
Component System
Model No. RX-VT80
2
RQT7801
CAUTION!
DO NOT INSTALL OR PLACE THIS UNIT IN A BOOKCASE,
BUILT-IN CABINET OR IN ANOTHER CONFINED SPACE.
ENSURE THE UNIT IS WELL VENTILATED. TO PREVENT
RISK OF ELECTRIC SHOCK OR FIRE HAZARD DUE TO
OVERHEATING, ENSURE THAT CURTAINS AND ANY
OTHER MATERIALS DO NOT OBSTRUCT THE
VENTILATION VENTS.
DO NOT OBSTRUCT THE UNIT’S VENTILATION OPENINGS
WITH NEWSPAPERS, TABLECLOTHS, CURTAINS, AND
SIMILAR ITEMS.
DO NOT PLACE SOURCES OF NAKED FLAMES, SUCH AS
LIGHTED CANDLES, ON THE UNIT.
DISPOSE OF BATTERIES IN AN ENVIRONMENTALLY
FRIENDLY MANNER.
WARNING:
TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR
PRODUCT DAMAGE, DO NOT EXPOSE THIS APPARATUS TO
RAIN, MOISTURE, DRIPPING OR SPLASHING AND THAT NO
OBJECTS FILLED WITH LIQUIDS, SUCH AS VASES, SHALL
BE PLACED ON THE APPARATUS.
CAUTION!
THIS PRODUCT UTILIZES A LASER.
USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE
OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN
MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.
DO NOT OPEN COVERS AND DO NOT REPAIR YOURSELF.
REFER SERVICING TO QUALIFIED PERSONNEL.
CAUTION!
Change the voltage setting to suit the AC voltage in your
area. See page 4.
Note that the unit will be seriously damaged or fail to operate
correctly if this setting is not made correctly.
Thank you for purchasing this product.
For optimum performance and safety, please read these instructions
carefully.
This product may receive radio interference caused by mobile
telephones during use. If such interference is apparent, please
increase separation between the product and the mobile
telephone.
THIS UNIT IS INTENDED FOR USE IN TROPICAL CLIMATES.
The socket outlet shall be installed near the equipment and easily
accessible or the mains plug or an appliance coupler shall remain
readily operable.
Dear customer
Precautions
Inside of productBack of product
• Avoid using or placing this unit near sources of heat. Do not leave it
in an automobile exposed to direct sunlight for a long time with the
doors and windows closed as this may deform the cabinet.
Avoid cuts, scratches, or poor connections in the AC power supply
cord, as they may result in possible fire or electric shock hazard.
Also, excessive bending, pulling or splicing of the lead should be
avoided.
Do not unplug the AC power supply cord by pulling on the lead. To
do so may cause premature failure or shock hazard.
Do not operate this unit in a bathroom, as a potential shock hazard
may result.
When not in use, disconnect the AC power supply cord from the
household AC outlet.
Please check and identify the supplied accessories.
AC power supply cord
For Saudi, Kuwait
For others
Remote control transmitter
.................................................. 1 pc.
........................................................ 1 pc.
.....................................................
...........................................................................
1 pc.
(N2QAGB000033)
Video connection cable
Batteries 2 pcs.
Supplied accessories
RELEASE RELEASE
3
RQT7801
ENGLISH
Attaching or detaching the speakers
Use of batteries
The remote control (included)
Align the speaker with the main unit as shown in the figure below,
interlock the grooves and press down.
Attaching the speakers
Unlock the speaker release levers by pulling them in the direction
shown above, and then slide each speaker up.
If irregular coloring occurs on your television
These speakers are designed to be used close to a television, but the
picture may be affected with some televisions and set-up
combinations.
If this occurs, turn the television off for about 30 minutes.
The televisions demagnetizing function should correct the problem. If
it persists, move the speakers further away from the television.
Use only the supplied speakers.
The main unit and speakers supplied provide the best possible sound
quality. Using other speakers can damage the unit and sound quality
will be negatively affected.
Detaching the speakers
Before attaching or detaching the speakers,
Be sure to set [SELECTOR] to
TAPE/ .
The function selector switch does
not separate entire unit from mains
even if in TAPE/
position.
Be sure to disconnect the speaker
cords.
OPR OFF
OPR OFF
Batteries (included)
Insert so the poles (+ and ) match those in the remote control.
Do not use rechargeable type batteries.
Do not:
mix old and new batteries.
use different types at the same time.
heat or expose to flame.
take apart or short-circuit.
attempt to recharge alkaline or manganese batteries.
use batteries if the covering has been peeled off.
keep together with metallic objects such as necklaces.
Mishandling of batteries can cause electrolyte leakage which can
damage items the fluid contacts and may cause a fire.
If electrolyte leaks from the batteries, consult your dealer.
Wash thoroughly with water if electrolyte comes in contact with any
part of your body.
Remove batteries if you do not plan to use the unit or the remote
control for long period of time. Store them in a cool, dark place.
SELECTOR
CD
RADIO
TAPE/
Caution
Use the speakers only with the recommended system.
Failure to do so may lead to damage to the amplifier and/or
the speakers, and may result in the risk of fire.
Consult a qualified service person if damage has occurred
or if you experience a sudden change in performance.
Do not attach these speakers to walls or ceilings.
Use
Aim at the sensor, avoiding obstacles, at a maximum range of 7
meters directly in front of the unit.
Keep the transmission window and the units sensor free from dust.
Operation can be affected by strong light sources, such as direct
sunlight, and the glass doors on cabinets.
Replace if the unit does not respond to the remote control even
when held close to the front panel.
Do not:
put heavy objects on the remote control.
take the remote control apart.
spill liquids onto the remote control.
About 7 meters in front of the
signal sensor
Transmission
window
Remote control
signal sensor
30
˚
30
˚
AA/R6/LR6
Insert the plug into the DC IN
Jack.
Plug the other end into the
cigarette lighter socket in
your car.
Use a flat-head screwdriver to turn the
voltage selector on the rear panel to the
appropriate position for the area in which
this system is to be
used.
To household
AC outlet
3 Set the voltage
1 Speaker cords
110-127V
220-
240V
220-240V
220-
240V
110-
127V
110-
127V
R20/LR20, UM-1
a
a
SPEAKERS (IMP 4
)
R
L
2
1
3
Red (+)
Red (+)
Black ()
Black ()
Disconnect the AC power supply cord.
Replace the batteries when
OPERATION/BATT goes dim during play.
Insert batteries in numbered order.
Disconnect the AC power
supply cord.
Removal
Insert your finger into the slot ( ) at the
bottom of the unit and push out the
batteries.
When using batteries
(not included)
When connecting the
car battery cord
(not included)
1
2
DC IN
(12-13.2V)
To TV
2 Video connection cable
(included)
Connect the video connection cable
from the VIDEO OUT terminal of the
rear panel of this unit to the VIDEO
IN terminal of the TV.
Set the VIDEO SWITCH to match
the television set to be connected.
PAL : When connecting to a PAL
system TV.
NTSC : When connecting to a NTSC
system TV.
For details, refer to the TV operating
instructions.
VIDEO
OUT
NTSCPAL
VIDEO
SWITCH
OPERATION / BATT
OPERATION/BATT
2 1
3 5 4
6
8
7
Insertion of connector
Even when the connector is perfectly
inserted, depending on the type of inlet
used, the front part of the connector may
jut out as shown in the drawing.
There is however no problem using the
unit.
The included AC power supply cord is for
use with this unit only.
Do not use it with other equipment.
Approx.
6 mm
Connector
Appliance
inlet
4 AC power supply cord
(included)
Note
4
RQT7801
Connection
Connect the AC power supply cord only after all other connections
have been made.
Preparation
Be sure to set [SELECTOR] to TAPE/ .
OPR OFF
5
RQT7801
ENGLISH
Control guide
The shaded buttons, such as
,
function in exactly the same
way as the buttons on the main unit.
Time access button (TIME ACCESS)
CD display button (DISPLAY)
Numbered buttons ( 10, 19, 0)
Cursor buttons (
, , ,
)
CD search buttons ( ), ( )
Video index buttons ( V-INDEX )
Resume play button (RESUME)
Shift button (SHIFT)
Album skip ( ALBUM )
Program button (PROGRAM)
A-B repeat button (A-B REP)
Play mode select button (PLAY MODE)
Zoom button (ZOOM)
Multi screen button (MULTI SCREEN)
On-screen display button (OSD)
ENTERENTER
MULMULTI SCREENTI SCREEN
RESUMERESUME
A-B REPA-B REP
PROGRAM
DISPLADISPLAY
OSD
V-INDEX
PREVPREV
NEXTNEXT
ZOOMZOOM
SHIFTSHIFT
ALBUM
PBC /PBC /
CLEAR CLEAR
SELECTSELECT
PLAY MODE
TIME ACCESS
Main unit
Remote control
CD lid
CD lid open/close button ( CD OPEN/CLOSE)
Display
CD play, select button ( SELECT, PLAY)
Stop/program clear, PBC on/off button
( PBC/CLEAR, STOP)
CD pause button ( PAUSE)
Return button ( )
Enter button (ENTER)
Tuning control (TUNING)
Function selector (SELECTOR)
Volume control (VOLUME)
Headphones jack (PHONES)
DECK 2 cassette holder (DECK 2)
Pause button ( PAUSE)
Stop/eject button ( STOP/EJECT)
Fast forward/cue button ( FF/CUE)
Rewind/review button ( REW/REV)
Playback button ( PLAY)
Recording button ( REC)
DECK 1 cassette holder (DECK 1)
XBS adjustor (XBS)
Built-in microphone (MIC)
Preset equalizer buttons
Editing speed/FM mode/beat proof selector
(EDIT/FM MODE/BP)
Band selector (BAND)
Fine tuning control (FINE TUNING)
CD skip, previous, next buttons ( PREV), ( NEXT)
Album skip, menu selection buttons
( ALBUM , MENU + )
Operation /battery indicator (OPERATION/BATT)
6
RQT7801
CDs
Disc type
Video CD
(version 1.1)
Video CD
(version 2.0)
CD
Logo
Indicated in these instructions as
shown below
Operated in the same way as audio
CDs. These CDs allow playback of both
video pictures and sound, however are
not equipped with PBC .
Equipped with PBC , these CDs allow
playback of menus on the TV screen as
well as high resolution still pictures.
You can use functions described for
video CD version 1.1 by turning PBC off
(see page 7).
Discs recorded with MP3
MP3
CD
VCD 2.0
VCD 1.1
CD selection Basic play
1
Push [ CD OPEN/CLOSE]
to open the CD lid.
2
Insert a CD.
Push [ CD OPEN/CLOSE]
to close the CD lid.
The total number of tracks and total playing time are shown on
the unit.
3
Press [ SELECT, PLAY] on the main unit or [
SELECT] on the remote control to play.
CD starts playing.
The track number and its elapsed playing time are shown.
To start from a selected track, press the numbered buttons on
the remote control.
Play starts from the selected track.
To select 19, press the corresponding numbered button.
To select a two-digit number, press [ 10], and then the two
numbers you want.
For example:
Track 10 : [ 10] [1] [0]
Track 25 : [ 10] [2] [5]
The menu screen appears on the TV (with some discs, it may not
appear immediately). The actual menu screen that appears may
differ depending on the disc. Some discs may display the menu
screen after animated or still screens have been played.
On the PBC screen you can also select a menu item by using [
MENU] or [MENU +] and then pressing [ SELECT, PLAY] on
the main unit or [ SELECT] on the remote control. Use the
numbered buttons on the remote control to make this selection.
High-precision still screens are also automatically recognized
and played.
4
Adjust the volume.
VCD 2.0
MP3CDVCD 1.1
CDVCD 1.1
PBC (Playback control)
PBC is a signal recorded on version 2.0 CDs that enables you to
control playback. It increases video enjoyment by allowing you to
interact with the system via menus, search functions and other typical
computer-style interfaces.
Use discs that display the logo mark indicated above, or conform to
the Compact Disc Digital Audio (CD-DA) standard. The disc may
not play properly if it does not confirm to this standard.
Do not:
use irregularly shaped CDs.
attach extra labels and stickers.
use CDs with labels and stickers
that are coming off or with
adhesive exuding from under
labels and stickers.
attach scratch proof covers or
any other kind of accessory.
write anything on the CD.
clean CDs with liquids. (Wipe
with a soft, dry cloth.)
use CDs printed with label
printers available on the market.
Preparation:
Set [SELECTOR] to CD on the main unit.
The unit comes on.
Turn the television on, select video input with the television input
switch.
You can use menus displayed on the TV screen to control playback
when running interactive software.
VCD 2.0
VCD 1.1VCD 2.0
This unit can play CD-DA (digital audio), MP3 and video CD format CD-R
and CD-RW that have been finalized (a process that enables players to
play CD-R and CD-RW) upon completion of recording.
It may not be able to play some CD-R or CD-RW due to the condition of the
recording.
Finalizing is a process that enables CD-R/CD-RW players to play audio
CD-R and CD-RW.
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
XXXX XXXX XXXXX XXXX XX
XXXX XXXX XXXXX
XXXX XXXX XXXXX
XXXX XXXX
PBC /PBC /
STSTOPOP
CLEAR CLEAR
ENTERENTER
MULMULTI SCREENTI SCREEN
RESUMERESUME
A-B REPA-B REP
PROGRAMPROGRAM
DISPLADISPLAY
OSDOSD
V-INDEX-INDEX
PREVPREV
NEXTNEXT
ZOOMZOOM
SHIFTSHIFT
ALBUMALBUM
PBC /PBC /
CLEAR
SELECTSELECT
PLAPLAY MODE MODE
TIME TIME ACCESSACCESS
PAUSEAUSE
1,2
3
4
3
Numbered
buttons
SELECTOR
CD
RADIO
TAPE/
MENUMENU
ALBUMALBUM
PREVPREV NEXTNEXT
PREVPREV
NEXTNEXT
PBC /PBC /
CLEAR CLEAR
Label must
face upward.
7
RQT7801
ENGLISH
How to work with menus
VCD 2.0
To select a menu item
To move to the
next/previous item
To make a selection
during PBC playback
(Depending on disc)
To return to the
previous menu
To quit menu play
To advance in slow
motion
Press [ MENU] or [MENU +] and then press
[ SELECT, PLAY] on the main unit or [
SELECT] on the remote control.
Press the numbered buttons on the
remote control to select the menu item.
To select track 10 or over, press [ 10]
then the two numbers.
Press [ SELECT, PLAY] on the main
unit or [ SELECT] on the remote
control.
Press [ NEXT] or [ PREV] during
play.
While paused
Press and hold
[ NEXT] on the main
unit or
press [ ] on the remote control.
Press [ ].
While in stop mode
Press [ PBC/CLEAR, STOP] on the main
unit or [ PBC/CLEAR] on the remote
control. PBC OFF appears on the display.
To skip forward/
backward
Press [ PREV] (backward) or [
NEXT] (forward) during play.
To stop
Press [ PBC/CLEAR, STOP] on the main unit or [ PBC/CLEAR]
on the remote control.
To pause
Press [ PAUSE] on the main unit or [ ] on the remote control
during play.
Press [ SELECT, PLAY] on the main unit or [ SELECT] on the
remote control to resume play.
To turn off the CD
Set [SELECTOR] to TAPE/ .
no disc is displayed if there is no disc in the unit.
If interference occurs to radios or televisions, place the unit as far as
possible from the equipment.
Do not press [ CD OPEN/CLOSE] during play, pause or
immediately after you have inserted the CD or closed the CD lid.
The CD may get scratched.
Note
OPR OFF
Menus will vary depending on the software. Press the buttons in
response to what appears on the TV and in accordance with the CDs
instructions.
(Example)
MP3CDVCD 1.1
To search forward/
backward
Press and hold [ PREV] (backward) or
[ NEXT] (forward) (Press [ ] or
[ ] on the remote control) during play.
The search speed increases up to 4 steps.
On the main unit: Each time you press and hold, it will increase by
one step.
On the remote control: Each time you press, it will increase by one
step. The steps will continue to increase as
you press and hold the button.
CDVCD 1.1VCD 2.0
ENTERENTER
MULMULTI SCREENTI SCREEN
RESUMERESUME
A-B REPA-B REP
PROGRAMPROGRAM
DISPLADISPLAY
OSDOSD
V-INDEX-INDEX
PREVPREV
NEXTNEXT
ZOOMZOOM
SHIFTSHIFT
ALBUMALBUM
PBC /PBC /
CLEAR CLEAR
SELECTSELECT
PLAPLAY MODE MODE
TIME TIME ACCESSACCESS
2
1
2
RESUME
DISPLADISPLAY
OSDOSD
The slow motion advance speed decreases up to 3 steps.
When a video CD is being played using the on-screen menus audio
may not be output while searching.
When a video CD is played as a slide show (continuous changing of
still screens) using the on-screen menus, fast-forwarding or
rewinding of the CD may not be possible.
During RANDOM mode ( page 8), you cannot skip to tracks
already played.
During PROGRAM play or RANDOM mode ( page 8) you can
search only within the track.
Note
Remote control only
This function allows you to resume CD playback ( page 6) from the
point it was stopped at.
Press [RESUME] in the stop mode.
Resume will not work if the CD lid is opened and during PROGRAM
or RANDOM modes.
Note
CDVCD 1.1
Resume play
Remote control only
OSD displays the CD operation, mode, and display information on
the television screen.
Press [OSD].
Every time you press the button:
OSD ON OSD OFF
OSD indicators differ depending on the video CD software.
Note
MP3CDVCD 1.1VCD 2.0
Television OSD indicators (On Screen Display)
Remote control only
You can display the remaining play time for the current track.
Press [DISPLAY] during play or pause.
Every time you press the button:
Elapsed play time Remaining play time
CDVCD 1.1
CD display
Remote control only
Use the zoom function to expand a portion of the picture on your
screen.
1
While paused
Press [ZOOM].
The screen will expand a portion of the picture.
2
Press [SHIFT] + [ ], [ ], [ ] or [ ] to view different
portions of the picture.
To exit zoom function
Press [ZOOM].
VCD 1.1VCD 2.0
Zoom function
8
RQT7801
ENTERENTER
MULMULTI SCREENTI SCREEN
RESUMERESUME
A-B REPA-B REP
PROGRAMPROGRAM
DISPLADISPLAY
OSDOSD
V-INDEX-INDEX
PREVPREV
NEXTNEXT
ZOOMZOOM
SHIFTSHIFT
ALBUMALBUM
PBC /PBC /
CLEAR CLEAR
SELECTSELECT
PLAPLAY MODE MODE
TIME TIME ACCESSACCESS
2
1
4
3
5
PBC /PBC /
CLEAR CLEAR
ENTERENTER
MULMULTI SCREENTI SCREEN
RESUMERESUME
A-B REPA-B REP
PROGRAMPROGRAM
DISPLADISPLAY
OSDOSD
V-INDEX-INDEX
PREVPREV
NEXTNEXT
ZOOMZOOM
SHIFTSHIFT
ALBUMALBUM
PBC /PBC /
CLEAR
SELECTSELECT
PLAPLAY MODE MODE
TIME TIME ACCESSACCESS
5
2
1
1,2
4
3
PBC /PBC /
CLEAR CLEAR
CDs
Remote control only
1
Press [PLAY MODE] to select the desired mode.
Every time you press the button:
: Plays and repeats one song only.
(1-REPEAT)
: Repeatedly plays all tracks on the disc.
(ALL-REPEAT)
RANDOM : Plays all the tracks on the disc in random
order.
RANDOM : Repeatedly plays all the tracks on the disc in
random order. (RANDOM REPEAT)
off (no indication) : Plays all tracks on the disc.
For MP3: RANDOM and RANDOM REPEAT modes are not
possible.
(The original display or screen returns after about 2 seconds.)
Proceed to step 2 if you selected 1-REPEAT in step 1.
Proceed to steps 3 and 4 if you selected 1-REPEAT in step1.
2
When you selected 1-REPEAT in step 1
Select the track with the numbered buttons.
To select a track 10 or over, press [ 10] then the two numbers.
Play starts from the selected track.
3
When you selected 1-REPEAT in step 1
Press [ ALBUM] or [ALBUM ] to select an album
and press [ENTER].
4
Press [ PREV] or [ NEXT] to select a track.
5
Press [ SELECT].
The CD starts.
To stop play
Press [ PBC/CLEAR].
To cancel
Press [PLAY MODE] to clear the PLAY MODE indicator on the
display.
Set [SELECTOR] to RADIO or TAPE/ .
Open the CD lid.
You cannot select RANDOM or RANDOM REPEAT
play during PROGRAM mode.
CDVCD 1.1
Note
OPR OFF
MP3
MP3
CDVCD 1.1
MP3
CDVCD 1.1
RANDOM RANDOM
off (no indication)
1
MP3CDVCD 1.1
CD Play Modes
You can program up to 24 tracks.
Remote control only
1
Press [PROGRAM].
PGM appears.
Proceed to steps 3, 4 and 5.
2
Select the tracks with the numbered buttons.
To select track 10 or over, press [ 10] then the two numbers.
Repeat step 2 to program other tracks.
3
An album list appears.
Press [ ALBUM] or [ALBUM ] to select an album
and press [ENTER].
4
A track list appears.
Press [ PREV] or [ NEXT] to select a track and
press [ENTER].
Repeat this step to program other tracks.
To program from another album
Press [ ], and then repeat the steps 3 and 4.
5
Press [ SELECT] to start play.
To exit program mode
Press [PROGRAM] in the stop mode. (You can replay your
programmed tracks by pressing [PROGRAM] and [ SELECT].)
To cancel
Press [ PBC/CLEAR] in the stop mode while PGM is displayed.
CLEAR will now be displayed.
Open the CD lid to cancel this mode.
To check program contents
Press [ PREV] or [ NEXT] in the stop mode while PGM is
displayed.
Every time you press the button, the track number and program order
are displayed.
To add to the program
Repeat steps 2 - 4 while checking program contents.
You cannot program CD-DA tracks together with MP3 tracks.
Cd FULL appears when over 24 tracks are programmed.
MP3
Note
MP3
MP3
MP3
MP3CDVCD 1.1
Program play
Remote control only
While a disc is playing, if you specify a start point (point A) and an
end point (point B), that segment will be repeated.
1
(During playback)
Press [A-B REP] at the start point (point A).
2
Press [A-B REP] at the end point (point B).
The segment between A and B is played repeatedly.
To cancel A-B repeat
Press [A-B REP] during the A-B repeat playback.
For your reference
A-B repeat can only be done with the same track.
A-B repeat is not possible with video CD when the time difference
between A and B is less than 2 seconds.
A-B repeat is not possible during PROGRAM mode.
During A-B repeat, TIME ACCESS cannot be used.
CDVCD 1.1VCD 2.0
A-B repeat
9
RQT7801
ENGLISH
1,3
2
ENTERENTER
MULMULTI SCREENTI SCREEN
RESUMERESUME
A-B REPA-B REP
PROGRAMPROGRAM
DISPLADISPLAY
OSDOSD
V-INDEX-INDEX
PREVPREV
NEXTNEXT
ZOOMZOOM
SHIFTSHIFT
ALBUMALBUM
PBC /PBC /
CLEAR CLEAR
SELECTSELECT
PLAPLAY MODE MODE
TIME TIME ACCESSACCESS
V-INDEX-INDEX
ENTERENTER
MULMULTI SCREENTI SCREEN
RESUMERESUME
A-B REPA-B REP
PROGRAMPROGRAM
DISPLADISPLAY
OSDOSD
V-INDEX-INDEX
PREVPREV
NEXTNEXT
ZOOMZOOM
SHIFTSHIFT
ALBUMALBUM
PBC /PBC /
CLEAR CLEAR
SELECTSELECT
PLAPLAY MODE MODE
TIME TIME ACCESSACCESS
2,2
1,1
PREVPREV
NEXTNEXT
PBC /PBC /
CLEAR CLEAR
SELECTSELECT
Remote control only
You can locate the particular screen in a track that you want to watch
by selecting the video index number.
Check the users manual or other material such as the CD Jacket for
information on whether your video CD software contains video index
numbers.
Press [ V-INDEX] or [ V-INDEX] in the play mode to
select the video index number.
Play starts at the video index selected.
With some discs, it may not be possible to make a video index search
with motion picture.
Note
VCD 1.1
To find a particular scene using a video
index number
Remote control only
There are two multi-screen modes:
DISC MULTI-SCREEN and TRACK MULTI-SCREEN.
Preparation:
Make sure OSD is on ( page 7).
This function divides the screen up into several parts and displays the
picture from each of the tracks. You can select the track you want
from the various pictures on the screen.
1
(While playback is stopped)
Press [MULTI SCREEN].
Track 1 will be played for a few seconds, then displayed as a still
picture. This will then be repeated for subsequent tracks. Up to 9
tracks can be displayed on the screen at any given time.
To display subsequent tracks:
Press [ NEXT].
To display previous tracks:
Press [ PREV].
To cancel the multi-screen mode:
Press [ PBC/CLEAR].
2
Press the numbered buttons to select the desired
track number.
That track will start playing. The number of the selected track is
displayed on the units display.
For your reference:
If you press [ SELECT] or [MULTI SCREEN] while a track is being
displayed as described in step 1, that track will start playing.
You cannot use disc MULTI SCREEN in PROGRAM and RANDOM
modes.
A track is divided into 9 sections and those sections are shown on the
multi screen. Play can start from the section of your choice.
1
(During play)
Press [MULTI SCREEN].
The first five-second segment of the track is played, then the last
frame of this segment remains displayed on the multi screen.
To cancel the multi-screen mode:
Press [ PBC/CLEAR].
2
Press the numbered buttons to select the desired
section of the track.
Play begins from that section.
For your reference:
If you press [ SELECT] or [MULTI SCREEN] as a track is being
displayed, play begins from that section.
You cannot use the MULTI SCREEN function in PROGRAM and
RANDOM modes.
Note
Track multi screen
Note
Disc multi screen
VCD 1.1
Multi screen functions
This function allows you to specify a time on the current track and
start play from that point.
Remote control only
Preparation: Make sure OSD is on ( page 7).
1
Press the numbered buttons to select the desired
track number.
That track will start playing.
2
Press [TIME ACCESS].
The track duration appears on the TV screen.
3
Press the numbered buttons to enter the time of the
desired part.
Example:
22:40 : [2] [2] [4] [0]
00:25 : [0] [0] [2] [5]
Play starts from the selected time.
The time to be entered should be a portion of the current track
time. If, for example, you are playing track 2, and you enter
0:25, play begins from 25 seconds into track 2.
To cancel this function
Press [TIME ACCESS] again.
Note
CDVCD 1.1
To find a particular scene using the time
(TIME ACCESS)
10
RQT7801
ENTERENTER
MULMULTI SCREENTI SCREEN
RESUMERESUME
A-B REPA-B REP
PROGRAMPROGRAM
DISPLADISPLAY
OSDOSD
V-INDEX-INDEX
PREVPREV
NEXTNEXT
ZOOMZOOM
SHIFTSHIFT
ALBUMALBUM
PBC /PBC /
CLEAR CLEAR
SELECTSELECT
PLAPLAY MODE MODE
TIME TIME ACCESSACCESS
2
1
PBC /PBC /
CLEAR CLEAR
CDs
This unit can play MP3 files recorded on CD-R/RW with a computer.
Files are treated as tracks and folders as albums.
This unit can access up to 999 tracks, 195 albums and 20 sessions.
Disc format
Discs must conform to ISO9660 level 1 or 2 (except for extended
formats).
File format
MP3 files must have the extension .MP3 or .mp3.
To play in a certain order
Prefix the folder and file names with 3-digit
numbers in the order you want to play them.
For example:
001abcd.mp3, 002efgh.mp3, 003ijkl.mp3.
However, some software used for writing discs may
cause recording to occur in a different order.
MPEG Layer-3 audio decoding technology
licensed from Fraunhofer IIS and Thomson
multimedia.
When making MP3 files to play on this unit
This unit is not compatible with packet-write format.
When both MP3 and CD-DA data is recorded on the disc over a
number of sessions:
If the first session contains MP3 recordings, the unit will play from
the MP3 made in that session till the session before the first CD-
DA recordings.
If the first session contains CD-DA recordings, the unit will play
only the recordings made in that session. The subsequent
sessions will be ignored.
Maximum number of displayable characters:
Album/track title: 21
ID3 title/artist name: 24
Text data that the unit doesnt support cannot be displayed.
(ID3 is a tag embedded in MP3 track to provide information about
the track.)
You cannot use RANDOM and RANDOM REPEAT modes, search
function, and TIME ACCESS function.
Some MP3 may not be played due to the condition of the disc or
recording.
Recordings will not necessarily be played in the order you recorded
them.
File format indicator
.MP3: Indicates the disc contains MP3 files
Limitations on MP3 play
To stop play
Press [ PBC/CLEAR].
To return to album list while in track list
Press [ ].
Remote control only
1
When a MP3 format CD is inserted, its album list will be
displayed.
Press [ ALBUM] or [ALBUM ] to select an album
and press [ENTER].
You can also use the cursor buttons or [ PREV], [
NEXT] to select an album.
2
A track list is displayed.
Press [ PREV] or [ NEXT] to select a track and
press [ SELECT].
You can also use the cursor buttons to select a track.
Play starts.
Using menus to play MP3 discs
root
001
001.mp3
002.mp3
003.mp3
001.mp3
002.mp3
003.mp3
002
Example:
001 ENG POP
002 ENG JAZZ
003 ENG RNB
004 ENG MUSICAL
005 ENG SOUNDTRACK
ROOT
PAGE 01/12
001 CRY ME A RIVER
002 EAST OF THE SUN
003 I'VE GOT YOU
004 HEAVEN
005 RAINBOW
002 ENG JAZZ
PAGE 01/07
002 ENG JAZZ
RAINBOW
JAMES HENSON
001 CRY ME A RIVER
002 EAST OF THE SUN
003 I'VE GOT YOU
004 HEAVEN
005 RAINBOW
PAGE 01/07
Album Name
Track Name
Current album
name
ID3 title name
ID3 artist
name
11
RQT7801
ENGLISH
The radio Tapes
To improve reception
FM: Raise and extend the whip antenna.
If stereo reception is poor, set [EDIT/FM MODE/BP] to MONO.
MW:Turn the unit to face the direction with the best reception.
SW:Raise and extend the whip antenna and keep it vertical
(SW1: also turn the unit to face the direction with the best
reception).
Reference:
Radio broadcasts may be hard to receive in a moving vehicle or
building because their signals are weak. Whenever possible, use the
unit by a window.
For short-wave broadcasts (SW1, SW2), tune to the approximate
frequency with [TUNING], and then use [FINE TUNING] control for
more precise tuning.
When using [TUNING], be sure to set [FINE TUNING] control pointer
to the center position.
Note
Fine tuning control
1
Set [SELECTOR] to RADIO.
OPERATION/BATT lights while the radio is on.
2
Switch [BAND] to select FM, MW, SW1 or SW2.
3
Tune in the station by using [TUNING].
4
If FM has been selected in step 2,
Select between STEREO and MONO using the
[EDIT/FM MODE/BP] switch.
To turn off the radio
Set [SELECTOR] to TAPE/ .
OPR OFF
MW/SW1 SW1/SW2FM
2
4
3
1
TUNING
FM MW SW1 SW2
BAND
LH
FINE TUNING
OPERATION/BATT
SELECTOR
CD
RADIO
TAPE/
HIGH/
STEREO/II
MIC/
MONO/I
NORMAL/
STEREO/II
EDIT/FM MODE/BP
3
2
1
SELECTOR
CD
RADIO
TAPE/
(DECK1) (DECK2)
OPERATION/BATT
Use normal position/TYPE
I
tape only.
Tape can be played on either DECK 1 or DECK 2.
1
Set [SELECTOR] to TAPE/
2
Press [ STOP/EJECT] and insert the tape with the
side to be played facing out ( ). Close the tape deck
by hand.
3
Press [ PLAY]
Tapes exceeding 100 minutes are thin and can break or get caught
in the mechanism.
Tape slack can get caught up in the mechanism and should be
tightened before playing the tape.
Endless tapes can get caught up in the mechanism if used
incorrectly.
OPERATION/BATT indicator(s)
Lights while the tape is being played.
To stop play
Press [ STOP/EJECT].
To pause play
Press [ PAUSE].
Press again to resume play.
To fast-forward or rewind (while stopped)
Press [ REW/REV] or [ FF/CUE].
To cue or review (during play)
Press [ REW/REV] or [ FF/CUE].
To play relay (DECK 2 to DECK 1)
When DECK 2 play has finished, DECK 1 play starts automatically.
Insert the tapes into DECK 1 and DECK 2.
Press DECK 2 [ PLAY].
Press DECK 1 [ PAUSE], then press [ PLAY].
Caution
Sound quality may be effected and the cassette tape may become
stuck if you do not adhere to the following.
Do not use stickers not included with the cassette tape.
Place stickers on the cassette tape only as indicated.
OPR OFF
12
RQT7801
Recording tips
Your attention is drawn to the fact recording pre-recorded tapes or
discs or other published or broadcast material may infringe
copyright laws.
Use normal position/TYPE
I
tape only.
Preparation:
Wind the cassette just past its leader so that recording can begin
immediately.
1
Press [ STOP/EJECT] and insert the cassette to
be recorded in DECK1.
Insert the tape with the side to be recorded facing out ( ).
Close the tape deck by hand.
2
Set [SELECTOR] to the source to be recorded.
Tune in the station. ( page 11)
Insert the CD you want to record ( page 6).
Prepare the desired CD recording mode.
Remote control only
To record programmed tracks
( Program play on page 8)
: do steps 1-2
: do steps 1, 3-4
To record CD/tracks by using CD Play Modes
( CD Play Modes on page 8)
1. : do step 1
Make sure that the CD is stopped.
2. 1-REPEAT mode: do steps 1,3-4
3. 1-REPEAT mode: Press [ PREV] or
[ NEXT] to select the track.
Insert the tape inside DECK 2 with the side to be played
facing out. Close the tape deck by hand. ( page 11).
Set [EDIT/FM MODE/BP] to HIGH or NORMAL.
HIGH: High speed
NORMAL: Normal speed
Tape-to-tape recording:
CDVCD 1.1
MP3
MP3CDVCD 1.1
MP3
CDVCD 1.1
CD recording:
Radio recording:
3
Press [ REC] to start recording.
[ PLAY] is also depressed with [ REC].
Note for CD recording:
Press [ REC] after the track numbers and so on are shown on
the unit display.
Recording and CD play automatically begin simultaneously.
Press DECK1 [ PAUSE], then press [ REC].
Press DECK2 [ PLAY] to start recording.
Deck2 playback and Deck1 recording start simultaneously.
Recording stops and the buttons are released when the end of the
tape is reached. (DECK1)
To stop recording
Press [ STOP/EJECT].
To pause recording
Press DECK 1 [ PAUSE].
To resume recording, press DECK 1 [ PAUSE] again.
If the tape finishes before the CD
The CD continues playing. Press [ PBC/CLEAR, STOP] to stop it.
To record on the other side of the cassette
Turn the cassette over and press [ REC].
Tape-to-tape recording:
Radio and CD recording:
Recording
SELECT
ENTERENTER
MULMULTI SCREENTI SCREEN
RESUMERESUME
A-B REPA-B REP
PROGRAMPROGRAM
DISPLADISPLAY
OSDOSD
V-INDEX-INDEX
PREVPREV
NEXTNEXT
ZOOMZOOM
SHIFTSHIFT
ALBUMALBUM
PBC /PBC /
CLEAR CLEAR
SELECTSELECT
PLAPLAY MODE MODE
TIME TIME ACCESSACCESS
1
3
2
SELECTOR
CD
RADIO
TAPE/
HIGH/
STEREO/II
MIC/
MONO/I
NORMAL/
STEREO/II
EDIT/FM MODE/BP
PREVPREV
NEXTNEXT
PBC /PBC /
STSTOPOP
CLEAR
PLAPLAY
Do not change the editing selector during editing. The playback
sound may flutter.
Any changes made to the volume or sound quality during recording
will not affect the recording.
Erasure prevention
Break the tab.
Cover the tab with
adhesive tape when you
want to use the tape for
recording again.
Note
Side A
Tab for side B
Tab for side A
Changes to volume and tone will not affect the recording.
Wind the cassette just past its leader so that recording can begin
immediately.
When recording MW, set [EDIT/FM MODE/BP] to the position
where there is least noise.
Use the AC power supply cord or insert fresh batteries.
When erasing recorded sound,
Insert the tape in DECK 1.
Set [SELECTOR] to TAPE/ .
Set [EDIT/FM MODE/BP] to HIGH or NORMAL .
Press [ REC].
OPR OFF
Recording through the built-in microphone (MIC)
Set [SELECTOR] to TAPE/ .
Set [EDIT/FM MODE/BP] to MIC/MONO.
Insert the tape in DECK 1 with the side to be recorded facing out.
Close the tape deck by hand.
Press [ REC].
Face towards the sound source.
When recording through the built-in microphone, no sound will be
heard from the speakers.
Note
OPR OFF
13
RQT7801
ENGLISH
Using headphones
(not included)
To clean this unit, wipe with a soft, dry cloth.
Never use alcohol, paint thinner or benzine to clean this unit.
Before using a chemically treated cloth, read the instructions that
came with the cloth carefully.
If the surfaces are dirty
Recording to an external unit
Clean the heads regularly to assure good quality playback and
recording.
Use a cleaning tape (not included).
For a cleaner, crisper sound
Lens care
Radio
Frequency band
FM 87.5108 MHz
MW 5201610 kHz
SW1 2.37.0 MHz
SW2 7.022.0 MHz
Tape recorder
Track system 4 track, 2 channel, stereo
Recording system AC bias
Erasing system Multi pole magnet
Monitor system Variable sound monitor
Frequency range
Normal 4012000 Hz
CD
Sampling frequency 44.1 kHz
Decoding 16 bit linear
Beam source/wavelength Semiconductor laser/780 nm
Number of channels 2 channel, stereo
Wow and flutter Below measurable limit
D/A converter MASH (1 bit DAC)
Video
Signal system NTSC/PAL
Output level Composite video, 1 Vp-p (75 )
MP3
Sampling frequency 32 kHz, 44.1 kHz, 48 kHz
General
Power supply
AC 110127 V/220240 V, 50/60 Hz
Power consumption: 41 W (50 Hz)
Battery 12 V (Eight R20/LR20, D, UM-1 batteries)
DC IN 1213.2 V
Output power 330 W...PMPO
(DC 12 V/AC 117 V): 18 W x 2/11.9 W x 2...RMS (max.)
Speakers 2 Woofer; 12 cm Cone type, 4
2 Tweeter; 5.4 cm Cone type, 4
2 Super tweeter; 1.5 cm Ceramic type
Jacks
Output
VIDEO OUT
LINE OUT: 10 k
Headphones: 32
Remote control
Battery DC 3 V (Two R6/LR6, AA, UM-3 batteries)
Control keys 37 keys
Dimensions (WxHxD) 696 x 302 x 265 mm
Main unit: 278 x 302 x 265 mm
Speaker box: 209 x 295 x 225 mm
Mass 8.5 kg without batteries
Specifications are subject to change without notice.
Mass and dimensions are approximate.
Note
Power consumption in standby mode: 4.3 W
Clean the lens regularly to prevent
malfunctions.
Use a blower to remove dust and a
cotton swab if it is extremely dirty.
Recommended product: Lens cleaner kit
(SZZP1038C).
Lens
Four types of sound effects can be selected.
The selected sound effect button lights.
CLEAR: Lightens pop and other music
SOFT: Allows background music enjoyment
HEAVY: Adds punch to rock
VOCAL: Enhances vocals
FLAT: No sound effects used
You can adjust the XBS effect to boost the
bass by turning the XBS adjustor.
When you initially apply the power source
The preset equalizer will automatically reset to
HEAVY when the unit is turned on.
When the unit is in TAPE/ condition and when the
power source is connected
The last preset equalizer setting will be retained when you turn on
the CD, RADIO or TAPE function.
OPR OFF
Note
1. Set [SELECTOR] to the source to be recorded.
2. Turn on the VCR or other recording equipment and make all
necessary settings.
3. Start record on the VCR (or other recording equipment) and then
start play on the source of the recording.
XBS
HEAVY
VOCAL
SOFT
FLAT
CLEAR
MIN MAX
Specifications
Equalizer
Turn down the volume and
connect the headphones to the
PHONES jack.
Plug type: 3.5 mm stereo
Avoid listening for prolonged periods
of time to prevent hearing damage.
Note
L
R
(L)
(R)
VIDEO
OUT
LINE
OUT
Set the VIDEO SWITCH according to the VCR to be connected.
A video cassette recorder (VCR), or other recording equipment, can
also be connected.
For details, refer to the instruction manual of the units which are to
be connected.
When units other than those described above are to be connected,
please consult your audio dealer.
Using an external unit
ex. connecting to the VCR
Rear panel of this unit
VCR (not included)
VIDEO OUT
VIDEO IN
Maintenance
AUDIO
OUT
AUDIO IN
XBS adjustor
RQT7801-1G
M0804NM1104
Matsushita Electric Industrial Co., Ltd.
Web Site: http://www.panasonic.co.jp/global/
En
Common Problems
No sound.
Turn the volume up.
The speaker connections may have shorted. Turn the unit off, check and correct the connections and
then turn the unit on.
No operation when powered by
batteries.
• Replace with new batteries.
• Align the
and
polarities properly when inserting the batteries.
• Disconnect the AC power cord when powered by batteries.
Listening to the radio
Noise is heard.
Sound is distorted.
Change the position of the antenna or the unit.
A beat sound is heard.
Turn the TV off or separate it from the unit.
Separate the antenna from other cables and leads.
Playing discs
The display is wrong or play
won’t start.
There is a loss of picture
information or the picture is
distorted.
The disc may be upside down.
Wipe the disc.
Replace the disc if it is scratched, warped, or non-standard.
Condensation may have formed inside the unit due to a sudden change in temperature. Wait about
an hour for it to clear and try again.
The total number of tracks
displayed differs each time the
same disc is inserted.
Unusual sound is heard.
The disc may be scratched, or its data may be defective. Replace the disc.
CD-RW cannot be read.
The disc was incompletely formatted. Use the recording equipment to fully format the disc before
recording.
Picture is smaller than screen.
Picture appears too wide.
Picture appears in monochrome.
It is possible that the setting of the VIDEO SWITCH of the units rear panel does not agree with the
TV.
Set the VIDEO SWITCH on the units rear panel to the appropriate position.
Depending on the TV set used, the picture may shrink vertically and black bars may appear both at
the top and bottom of the screen. This is not an indication of malfunction.
Note
The picture of the video CD does
not appear on TV.
The video connection cable is not connected. Connect the video connection cable.
The TV is not set to video input mode. Set the TV to video input mode.
While playing a CD using
batteries, the OPERATION/BATT
indicator dims or goes out or the
sound may be cut off.
Should this happen, replace the batteries.
Remote control
Remote control doesnt work.
Check the batteries are inserted correctly.
Replace the batteries if they are worn.
Troubleshooting guide
Before requesting service, make the below checks. If you are in doubt about some of the check points, or if the remedies indicated in the chart
do not solve the problem, consult your dealer for instructions.
Reference pages are shown as black circled numbers .
The cassette deck
Poor quality sound.
Clean the heads.
Recording is not possible.
If the erasure prevention tabs have been removed, cover the holes with adhesive tape.
Not ejected or closed.
Use the AC power supply cord or insert fresh batteries, and press [ PLAY], then press
[ STOP/EJECT].
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14

Panasonic RXVT80 Operating instructions

Category
CD players
Type
Operating instructions

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI