CYLINDA IH 715 RF User guide

Category
Hobs
Type
User guide
GB1
IH 710
IH 715
EN2
IMPORTANT SAFETY INSTRUCTIONS ................................................................................ 3
INSTALLATION ....................................................................................................................5
ELECTRICAL CONNECTIONS ............................................................................................... 7
CARE AND MAINTENANCE OF THE GLASS CERAMIC HOB ............................................... 8
TROUBLESHOOTING GUIDE ............................................................................................... 8
AFTER-SALES SERVICE........................................................................................................ 9
ENERGY SAVING TIPS ......................................................................................................... 9
SAFEGUARDING THE ENVIRONMENT................................................................................ 9
DECLARATION OF CONFORMITY .................................................................................... 10
PRODUCT DESCRIPTION................................................................................................... 11
HOB DIMENSIONS (mm) ................................................................................................... 11
CONTROL PANEL DESCRIPTION....................................................................................... 12
SPECIAL FUNCTIONS......................................................................................................... 12
Child safety function............................................................................................................................12
Multiple zone function........................................................................................................................12
Gentle heat function............................................................................................................................13
Fast boiling function............................................................................................................................13
Time switch function ...........................................................................................................................13
Hold function..........................................................................................................................................14
Enabling and removing the hold function ..................................................................................14
INSTRUCTIONS FOR USE................................................................................................... 15
TABLE OF CONTENTS
EN3
YOUR SAFETY AND THAT OF OTHERS IS PARAMOUNT
This manual and the appliance itself provide important safety messages, to be read and
always observed.
WARNING:
All messages relevant to safety specify the potential risk to which they refer and
indicate how to reduce the risk of injury, damage and electric shocks due to
incorrect use of the appliance. Make sure to comply with the following:
The appliance must be disconnected from the power supply before
carrying out any installation operation.
Installation and maintenance must be carried out by a specialised
technician, in compliance with the manufacturers instructions and the
local safety regulations in force. Do not repair or replace any part of the
appliance unless specifically stated in the user manual.
The appliance must be earthed.
The power cable must be long enough for connecting the appliance, fitted
in the cabinet, to the power supply.
For installation to comply with the current safety regulations, an
omnipolar switch with minimum contact gap of 3 mm is required.
Do not use multi-sockets or extension cords.
Do not pull the appliances power cable.
The electrical parts must not be accessible to the user after installation.
The appliance is designed solely for domestic use for cooking food. No
other use is permitted (e.g. heating rooms). The Manufacturer declines any
liability for inappropriate use or incorrect setting of the controls.
The appliance and its accessible parts become hot during use. Care should
be taken to avoid touching heating elements. Children less than 8 years
old shall be kept away unless continuously supervised.
The accessible parts can become very hot during use. Children must be
kept away from the appliance and watched over to ensure they do not
play with it.
Do not touch the appliance heating elements during and after use. Do not
allow the appliance to come into contact with cloths or other flammable
materials until all the components have cooled sufficiently.
Do not place flammable materials on or near the appliance.
Overheated oils and fats catch fire easily. Pay attention when cooking food
products rich in fat and oil.
IMPORTANT SAFETY INSTRUCTIONS
EN4
This appliance can be used by children aged from 8 years and above and
persons with reduced physical, sensory or mental capabilities or lack of
experience and knowledge if they have been given supervision or
instruction concerning use of the appliance in a safe way and understand
hazards involved. Cleaning and user maintenance shall not be made by
children without supervision.
If the surface is cracked, switch off the appliance to avoid the possibility of
electric shock.
The appliance is not intended to be operated by means of an external
timer or separate remote control system.
Unattended cooking on a hob with fat or oil can be dangerous and may
result in fire. NEVER try to extinguish a fire with water, but switch off the
appliance and then cover flame e.g. with a lid or a fire blanket.
Danger of fire: do not store items on the cooking surfaces.
Do not use steam cleaners.
Metallic objects such as knives, forks, spoons and lids should not be placed
on the hob surface since they can get hot.
EN5
IMPORTANT:In order to prevent the electronic circuits from overheating, and therefore
from being damaged, we recommend the following:
Do not install the hob near a dishwasher or washing machine, so that the
electronic circuits do not come into contact with steam or moisture, which
could damage them.
If an oven is installed beneath the hob, make sure that it is equipped with a cooling system.
If the temperature of the electronic circuits exceeds the maximum permitted temperature,
the hob will switch off automatically; in this case, wait for a few minutes until the internal
temperature of the electronic circuits reaches a tolerable level, at which point it will be
possible to switch the hob on again.
Switch the hob off after use.
INSTALLATION
The hob must be set into a worktop between
20 mm and 50 mm deep
There must be nothing between the hob and
the oven (cross rails, brackets, etc.).
The distance between the lower face of the
glass ceramic hob and the cupboard or
separating panel must be at least 20 mm.
If the hob is to be installed next to a column
unit, leave a distance of at least 100 mm from
the edge of the hob.
Make an opening in the worktop of the
dimensions shown in the Product Description
Sheet supplied separately.
Apply the supplied gasket to the hob (unless it
has already been fitted), after having cleaned
its surface.
Rear wall
Front
A
EN6
1 2
3
EN7
Electrical connection must be made before connecting the appliance to the electricity
supply. The appliance must be installed by a qualified electrician who is fully aware of
current safety and installation regulations. Specifically, installation must be carried out in
compliance with the regulations of the local electricity supply company. Make sure that the
voltage indicated on the rating plate corresponds to the voltage in your home. Regulations
require that the appliance be earthed: use conductors (including the earth conductor) of the
appropriate size only. The manufacturer declines all liability for injury to persons or animals
and for damage to property resulting from failure to observe the above regulations. For the
electrical connection use a H05RR-F type cable as indicated in the table below:
POWER SUPPLY VOLTAGE
The appliance must be connected to the electricity supply by means of an all-pole
disconnect switch with minimum contact gap of 3 mm.
ATTENTION:the power supply cable must be long enough to allow the hob to be removed
from the worktop and must be positioned so as to avoid damage or overheating caused by
contact with the base.
CONNECTING TO THE TERMINAL BOARD
N.B.:the yellow/green earth wire must be connected to the terminal with the symbol
and must be longer than the other wires.
Remove approx. 70 mm of the cable sheath from the power supply cable (B).
Strip approx. 10 mm of sheath from the wires. Then insert the power supply cable
into the cable clamp and connect the wires to the terminal block as indicated in the
connection diagram placed close to the terminal block itself.
Secure the power supply cable (B) by means of the cable clamp.
Close the terminal board with the cover (A) securing it with the screw provided.
After the electrical connection, fit the hob from the top and hook it to the support
springs, following the diagram.
ELECTRICAL CONNECTIONS
Conductors Amount x size
220-240V ~ +
3 X 2.5 mm
2
220-240V 3~ +
4 X 1.5 mm
2
380-415V 3N ~ +
5 X 1.5 mm
2
380-415V 2N ~ +
4 X 1.5 mm
2
A B
EN8
HOB NOT WORKING
When pressing the control buttons, did you follow the instructions in the section
“Using the hob” in the enclosed “Product Description Sheet”?
Is there perhaps a power failure?
Did you dry the hob carefully after cleaning it?
1. If a cooking zone has been selected and an “F” or an “ER” appear on the display
followed by a number, contact the After Sales Service and inform them.
- With the exception of the message “F03” or “ER03” that identifies the
incorrect cleaning of the controls area.
- To solve the problem follow the instructions in the “Cleaning and maintenance
of the glass-ceramic hobI paragraph.
2. If one of the following codes is displayed when the hob On button is pressed: F12,
F13, F22, F25, F31, F36, F47, E2, E5, E6, E7, E9 contact the After-sales Service and
inform them of the code displayed.
3. If the hob does not work following intensive use, the hob internal temperature is too
high. Wait a few minutes until the hob cools down. The display shows the code “F21”.
IMPORTANT:If you are not able to turn the glass ceramic hob off after using it, disconnect
it immediately from the power supply.
CARE AND MAINTENANCE OF THE GLASS CERAMIC HOB
Clean the hob, when it is cool, after each use. This will prevent
the build-up of dirt and make cleaning easier.
IMPORTANT:never clean the appliance with high pressure
water or steam cleaning equipment.
Use a clean cloth, absorbent kitchen wipes and washing
up liquid or a specific glass ceramic cleaner.
Remove baked-on dirt with the special scraper tool
(if provided) and specific cleaning products.
Food spills should be cleaned off before they bake onto
the glass ceramic surface.
Foods with high sugar content (toffee, fruit juice, jam,
etc.) that boil over while cooking, or spattered sugar
stains must be immediately removed using a scraper.
Do not use abrasive products, bleach, oven-cleaner
spray or pan scourers.
The hob should be treated periodically with a proprietary
brand of protective wax for glass ceramic hobs.
TROUBLESHOOTING GUIDE
EN9
PACKING
The packaging material is 100% recyclable and marked with the recycling symbol ( ).
PRODUCTS
This appliance is marked in compliance with European Directive 2002/96/EC on Waste
Electrical and Electronic Equipment (WEEE). By ensuring that this appliance is scrapped
suitably, you can help prevent potentially damaging consequences for the environment
and health.
The symbol on the appliance or accompanying documentation indicates that this
product should not be disposed of as unsorted municipal waste but must be taken to a
collection point for the treatment of WEEE.
Disposal must be carried out in accordance with local environmental regulations for
waste disposal.
For more detailed information about treatment, recovery and recycling of this product,
please contact your local authority, the household waste disposal service or the shop
where you purchased the product.
AFTER-SALES SERVICE
Before calling the After-Sales Service, make sure you can
give the following information:
- type of fault or problem;
- exact model (written on the label affixed to the
instruction);
- service number that follows the word SERVICE on
the rating plate under the hob and on the label
affixed to instruction/warranty;
- your complete address and phone number.
If any repairs are required, please contact an authorised
Cylinda service.
ENERGY SAVING TIPS
Use pots and pans whose bottom diameter is equal
to that of the cooking zone or slightly larger.
Only use flat-bottomed pots and pans.
If possible, keep pot lids on when cooking.
Cook vegetables, potatoes, etc. with little water in
order to cut down cooking time.
SAFEGUARDING THE ENVIRONMENT
NO!
EN10
DECLARATION OF CONFORMITY
This cooktop is suitable for contact with foodstuffs and
complies with EEC (CE) Regulation n. 1935/2004.
The appliances are designed solely for use as cooking
appliances. Any other use of the appliances (e.g. for room
heating) is considered as improper use and potentially
dangerous.
The appliances are designed, built and sold in compliance with:
safety objectives of the “Low Voltage” Directive 2006/95/EC
(which replaces 73/23/EEC and subsequent amendments)
the protection requirements of Directive “EMC” 2004/108/EC;
EN11
PRODUCT DESCRIPTION
1. Radiant cooking zone Ø 145 mm
2. Radiant triple cooking zone Ø 210 mm
3. Radiant cooking zone Ø 145 mm
4. Radiant cooking zone Ø 180 mm
5. Display
IMPORTANT:To avoid permanently damaging
the glass ceramic hob, do not use:
- pots with bottoms that are not perfectly
flat,
- metal pots with enamelled bottom.
Any aesthetic defects (scratches, marks etc.)
must be reported at the time of installation.
HOB DIMENSIONS (mm)
TYPE: PLEFK 230 V ~ /400 V 3 N ~ 50 Hz 6.4 kW
EN12
A. On/Off
B. Pause
C. Select cooking zone and set level
D. Special functions bar
E. Timer bar
F. Child safety device
CONTROL PANEL DESCRIPTION
SPECIAL FUNCTIONS
Child safety function
The child safety function blocks all use of the hob to prevent children from using it.
Enabling and removing the child safety function
To switch on the child safety function, press the button. All hob commands are
disactivated with the exception of the child safety key and the on/off key.
Control of the hob is blocked at the settings active prior to the child safety function
being enabled. Levels or special functions set for cooking zones prior to activation
of the child safety function are “frozen” and are not modifiable.
If none of the cooking zones are being used, activating the child safety function
will switch off the hob. When it is switched back on again, the child safety function
remains. Press and hold the key for three seconds to disable it. In the event the hob
switches off during a power failure, the child safety function will not be enabled when
the hob is switched back on again.
Multiple zone function
Enables the outer rims of the hotplates as well.
This function switches on the outer rim of the hotplates as well (if available) meaning
larger pots can be used with more optimum distribution of the heat provided by the
element below the cooking zone.
Enabling and removing the multiple zone function
Press the key to enable this function. It applies to cooking zones only, if available.
This function can be selected at any level and with any of the special functions
enabled. Press the and keys at the same time to remove it.
F C C D
E
C C B A
EN13
Gentle heat function
Temperature is kept low evenly across the cooking zone. Recommended cooking
times are provided for the following foods (in containers): to leaven dough, to soften
butter, to warm baby milk or baby food, to make yohgurt and to melt chocolate.
Fast boiling function
A more powerful setting to bring water rapidly to the boil.
The fast boiling function sets the cooking zone at a hotter temperature than level 9
for short periods. Water can be boiled in less time with this function.
Enabling and removing the fast boiling function
The function can be set for all cooking zones switched on by pressing the key.
To remove this function, press the key for the required zone to lower the power
level or press the and keys at the same time.
Time switch function
The time switch function can be used as a short-time alarm or to programme a specific
cooking zone.
The time switch function can be used as a short-time alarm with no association to
any specific cooking area, or it can be allocated to a selected zone and the relative
operation programmed.
Enabling and removing the time-switch function
To use the time-switch function as a short-time alarm, press the key on the special
functions bar. Press the and keys on the timer bar to set the time. You can set
times of up to 99 minutes. When the set time elapses, a long beep sounds. To switch
the buzzer off, press .
To use the time-switch function and set the time a cooking zone should switch off at,
a power level or the fast boiling / gentle heat functions must be set for the relative
cooking zone.
When you press the time-switch key, the time bar display starts to flash. By pressing the
OR keys to select a cooking zone, one of the dots at the four corners of the timer
display lights up to indicate the zone selected. Use the and keys on the timer bar
to set the required time. The display will stop flashing after a few seconds meaning the
selected cooking zone has been correctly programmed.
Another cooking zone can now be programmed. The timer can be set separately for
each of the cooking zones.
The relative dots light up at the corners of the timer bar display to indicate which
cooking zones the timer has been set for.
The shortest time set is usually shown. When you select a cooking zone, the timer bar
display shows the time set for that zone. To disable the timer for a cooking zone, press
the and keys at the same time.
EN14
Hold function
With the hold function you can temporarily hold the cooking processes currently
underway to prevent food from burning or liquids overflowing from pots due to
unwanted overboiling. When the hold function is enabled, all cooking areas switched
on are brought to the same keep-warm temperature as the special keep-warm
function.
Enabling and removing the hold function
Press the key to enable the hold function. A dot lights up on the key to indicate it
has been switched on. Two flashing vertical bars appear on the displays of all cooking
zones. If the gentle heat function is being used in one of the cooking zones, the keep-
warm temperature will be the same as the gentle heat temperature, given that the
latter is the cooler of the two. To switch off the hold function, press the hold key again.
All levels previous to the hold function being switched on are restored when the
hold function is removed. Any times set using the timer will continue to count down
during the entire time the hold function is enabled. The hold function switches off
automatically after 2 hours. DO NOT LEAVE THE HOB UNATTENDED FOR ANY REASON
WHATSOEVER EVEN WHEN THE HOLD FUNCTION IS ON.
EN15
To switch on the hob, press and hold the key for at least two seconds. A dot lights up next
to the key.
A beep sounds when the hob switches on. The display shows 0 for each cooking zone.
It the hob has already been on and the cooking zones have not cooled to the appropriate
temperature, an Hsymbol is shown on the display for any cookings zones that are still hot.
Select the required cooking zone within 25 seconds, by pressing the or keys to switch
it on.
The cooking zone will stay selected for 6 seconds. After this, you need to select it again by
pressing or .
The hob features special functions for each different cooking zone.
If within about 25 seconds none of the cooking zones are used, the hob switches itself off
automatically for safety reasons.
IMPORTANT:for safety reasons, the hob is equipped with an automatic cut-off function
after 1 hour at the maximum power setting or after 6 hours at minimum power or gentle
heat setting.
During normal use of the cooking zones, once a zone has been selected the power level can
be set from level 1 to 9 using the or keys. Pressing the key from 0 will set the hob
straight to 9.
Pressing the and keys at the same time switches off the cooking zone.
After the cooking zone has been switched off, an H appears on the associated display to
indicate that it is still hot.
This will stay on until the temperature in the cooking zone falls to a safe level.
If the hob is switched off while the hotplates are still warm, the H sign will stay on until the
cooking zone has cooled.
To use the special functions when the cooking zone is in use, press the relative key on the
special functions bar. To help understand how the appliance works, a deep beep sounds
when you try to select an operation that is not allowed. The special fast boiling and gentle
heat functions can be enabled separately for each cooking zone. The special gentle heat
function is indicated with clockwise rotation movement on the display of the cooking zones
it has been enabled for.
The fast boiling function is indicated on the display with three horizontal bars that light up
one after the other from the bottom up.
To change the special function simply select the required cooking zone and press the
relative key for the new special function you want to set.
INSTRUCTIONS FOR USE
5019 600 00365
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17

CYLINDA IH 715 RF User guide

Category
Hobs
Type
User guide

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI