Press and release MFB once
Press and hold the “ - ” button
Press and hold the “ + ” button
Press and release “ - ” button
Press and release “ + ” button
Press and release MFB once
Specifications
Charging
ACTIVears
™
Wireless Headphones
ACTIVears
™
allows you to answer and end calls directly
from the device’s interface. Refer to the chart below for
the appropriate functions.
Press and release MFB once
Press and release MFB once
Press and hold MFB for about
2 seconds or until you hear a
tone
Press and release MFB once
Press and release MFB twice
Press and hold MFB for about 2
seconds
Press and hold MFB for about 2
seconds
Press and release MFB twice
Press and release MFB twice
(MFB)
Power On & Off
Connecting
Multi-Pairing
Product Overview Handsfree
1. Keep your device within 3 feet from ACTIVears
™.
2. Navigate to your device’s Bluetooth configuration menu and enter
pairing mode.
3. Press and hold the multi function button for approximately 8
seconds until the LED light on ACTIVears
™
flashes red and blue.
4. Using your bluetooth device, scan for a list of available devices
and select “SKYNDI”.
5. If prompted, enter password or PIN code: “0000”.
6. After successfully pairing, a blue LED light on ACTIVears
™
will flash twice in 4-second intervals.
ACTIVears
™
can simultaneously be connected with up to two
Bluetooth devices. Here’s how:
1. Pair ACTIVears
™
with device A following the aforementioned
procedures.
2. After successfully pairing device A, reenter pairing mode on
ACTIVears
™
, pairing with device B.
3. ACTIVears
™
is now connected to two devices simultaneously.
Handsfree
ACTIVears
™
allows you to control your Bluetooth
device while listening to music. Please refer to the
chart below for the appropriate functions.
Bluetooth Version: CSR8635, v4.0+EDR
Bluetooth Profiles: Headset, Handsfree, A2DP, AVRCP
Operating Distance: 32.8 feet
Talk Time: 4 - 6 Hours
Standby Time: 150 Hours
Charging Time: 1.5 Hours
Charing Port: MicroUSB
ACTIVears
™
comes with a built-in rechargeable battery and
MicroUSB charging cable. Prior to use, we recommend fully charging
the unit, which may take up to 1.5 hours.
Charging Indicators:
Red Light: Charging
No Light: Fully Charged
Power On: Press and hold MFB for 4 seconds
Power Off: Press and hold MFB for 4 seconds
/
