Zaptoys International NEX-9474S-27TX User manual

Type
User manual

Zaptoys International NEX-9474S-27TX is a remote-controlled vehicle that can be operated with a transmitter. It is powered by batteries and requires 3 x 1.5V (AA) size batteries for the vehicle and 1 x 9V (006P, 6F22) size battery for the transmitter. The vehicle has a trim switch on the underside, between the two front wheels, that can be used to align the wheels for consistent straight-line driving. It also has an antenna tube holder where you can insert the antenna wire and tie a knot on top to secure it.

Zaptoys International NEX-9474S-27TX is a remote-controlled vehicle that can be operated with a transmitter. It is powered by batteries and requires 3 x 1.5V (AA) size batteries for the vehicle and 1 x 9V (006P, 6F22) size battery for the transmitter. The vehicle has a trim switch on the underside, between the two front wheels, that can be used to align the wheels for consistent straight-line driving. It also has an antenna tube holder where you can insert the antenna wire and tie a knot on top to secure it.

www.tuv.com
Appendix 5
Prüfbericht - Nr.:
Test Report No. 14011123 001 Seite 5 von 5
Page 5 of 5
This user manual is for whole set of transmitter and receiver. The transmitter descripted
in this user manual is of model 9474S.
  • Page 1 1

Zaptoys International NEX-9474S-27TX User manual

Type
User manual

Zaptoys International NEX-9474S-27TX is a remote-controlled vehicle that can be operated with a transmitter. It is powered by batteries and requires 3 x 1.5V (AA) size batteries for the vehicle and 1 x 9V (006P, 6F22) size battery for the transmitter. The vehicle has a trim switch on the underside, between the two front wheels, that can be used to align the wheels for consistent straight-line driving. It also has an antenna tube holder where you can insert the antenna wire and tie a knot on top to secure it.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI