2. Salus
  3. RT500RF

Salus RT500RF Easy User Manual

  • Hello! I am an AI chatbot trained to assist you with the Salus RT500RF Easy User Manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
To enable the Frost Protection mode, press FROST button for 3-4 seconds. Once Frost Protection is enabled,
the set point temperature is automatically set to 5°C to provide protection from the risk of freezing.
Whenever Frost Protection is activated, the Frost Protection indicator will ash.
To cancel, press FROST button again for 3-4 seconds.
STEP FIVE
AM
M T W T F
SET PROG
Press SELECT and program will move to the next program.
SELECT
STEP FOUR
AM
M T W T F
SET PROG
Press SELECT and temperature will ash.
Use up or down buttons to change temperature. OR
SELECT
STEP TWO
AM
M T W T F
SET PROG
Press SELECT key to select rst program.
Use up or down buttons to change hour.
MINUTES
DAY
Easy user guide
RT500/RT500RF
Programmable Room Thermostat
AND
OR
AM
M
SET
SET
SELECT
SELECT
OR
SELECT
SETTING THE TIME AND DAY
PROGRAMMING WEEKDAYS
Day and time are now set.
To set the clock press and hold the SELECT and SET buttons for 3/4 seconds.
Input correct hour using your up or down buttons, making sure it’s on the correct AM or PM.
Then press SELECT.
Use the up or down buttons to set the correct minutes.
Then press SELECT.
OR
Now you will see the day ashing. Use the up or down buttons to set the correct day.
Then press SELECT
and then SET.
AM
M
SET
SET
SELECT
NOTE: The RT500RF is time and temperature controlled.
When unit times out data will be saved to point of time out.
If the unit times out, data will be saved to that point.
STEP ONE
AM
M T W T F
SET PROG
OR
SELECT
Press SET and M T W T F will ash (Only in 5-2 day mode).
See manual for alternative mode settings.
PROGRAMMING WEEKEND
FROST PROTECTION
SLEEP MODE
STEP ONE
AM
SA SU
SET PROG
AM
M T W T F
To enter sleep mode hold the up and down buttons for 3 seconds.
The RT500 functions will be paused to save battery power. To wake the unit up, press any key.
After programming weekdays, press SET and then up arrow key SA SU will ash. Then press SELECT.
Repeat Steps TWO to FOUR as above.
STEP THREE
AM
M T W T F
SET PROG
Press SELECT and minutes will ash.
Use up or down buttons to change minutes. OR
SELECT
HOUR
AM
M
SET
SET
For more information please contact the SALUS technical team
Tel: 01226 323961
www
.salus-tech.com
AND
RedwellGB Heating Ltd
Seabraes House, 18 Greenmarket,
Dundee, DD1 4QB
Tel: 0330 0884 360
Web: www.redwellinfraredheating.com
/