HERO Passion Pro Owner's manual

PREFACE

Thank you for selecting a Hero MotoCorp Passion Pro. We wish you many miles of

continued riding pleasure in the years ahead.

This vehicle is fitted with a lighting feature known as “Automatic Headlamp ON”. The feature

is mandated for all 2 Wheelers by Ministry of Road Transport & Highways (Government of

India) vide notification GSR 188 (E) dated 22nd February 2016. This feature helps in

conspicuity for improving rider safety. The headlamp of this vehicle will always be lit ON when

the engine gets ON.

Your vehicle is conforming to latest (Bharat stage-IV norms) regulation for emission, safety &

noise levels. We are also using non asbestos brake shoes/pads and engine gaskets which are

environment friendly in nature.

This booklet is your guide to the basic operation and maintenance of your new

Hero MotoCorp Passion Pro. Please take time to read it carefully. As with any fine machine,

proper care and maintenance are essential for trouble-free operation and optimum

performance.

We at Hero MotoCorp, are committed to demonstrate excellence in our environment

performance on a continual basis, as an intrinsic element of our corporate philosophy. To

achieve this we commit ourselves to continue product innovations to improve environment

compatibility, comply with all applicable legislation including environment legislation and

strengthen the green supply chain.

Your Authorised Hero MotoCorp dealer will be glad to provide further information or

assistance and is equipped to handle your future service needs.

Let us make this world a safer, healthier and more environment friendly place.

ALL INFORMATION, ILLUSTRATION, PHOTOGRAPH, DIRECTIONS,

SPECIFICATIONS AND OTHER CONTENTS COVERED IN THIS OWNER'S

MANUAL ARE BASED ON THE LATEST PRODUCT INFORMATION AVAILABLE

AT THE TIME OF ITS PRINTING APPROVAL, AND THE ACCURACY OR

CORRECTNESS OF THE SAME IS NOT UNDERTAKEN OR GUARANTEED.

Hero MotoCorp Ltd RESERVES THE RIGHT TO MAKE CHANGES IN ITS

CONTENTS AT ANY TIME WITHOUT NOTICE AND/OR INCURRING ANY

OBLIGATION, WHATSOEVER. NO ONE IS ALLOWED TO REPRODUCE ANY

PART OF THIS PUBLICATION WITHOUT OBTAINING PRIOR WRITTEN

PERMISSION FROM Hero MotoCorp Ltd.

NOTE

Pg. No.Pg. No.

CONTENTS

Pg. No.

îEngine oil/Engine oil top up process 30

îEngine oil replacement process 30

îMaintenance schedule 27

VEHICLE IDENTIFICATION 1

PRODUCT SPECIFICATION 2

VEHICLE SAFETY 4

îImportant safety information 4

îProtective apparel 5

SAFE RIDING TIPS 6

ACCESSORIES & MODIFICATIONS 7

îImportance of maintenance 25

îFuel tank 19

îSide stand indicator/Switch 17

BRAKING/PARKING 24

MAINTENANCE 25

îService reminder indicator 14

îFuel valve 18

îLeft handlebar controls 14

îFuel gauge/odometer/trip meter 14

TOOL KIT/FIRST AID KIT 24

îRight handlebar controls 15

RIDING 23

îSteering lock/i3s (idle stop start system) 16

îMaintenance safety/Safety precautions 26

îInstruments & Indicators 12

îSeat lock/Helmet hanger 20

STARTING THE ENGINE 22

ANTI-THEFT TIPS 7

PRE-RIDE INSPECTION 21

TIPS FOR HEALTHY ENVIRONMENT 8

VEHICLE VIEWS 9

PARTS FUNCTION 12

îIgnition switch 13

îSpark plug 32

îThrottle controlled ignition system (TCIS) 37

îBrake wear indicator 43

îAir cleaner drain tube 34

îSide stand 49

îOil filter screen & centrifugal filter 31

îThrottle operation/Valve clearance 35

îCarburetor (idle speed) 37

îDrive chain 38

îFront brake (Disc Type) 41

îFront brake (Drum Type) 42

îRear brake (Drum Type) 43

îBattery 46

îTyres 45

îDrive chain slider 40

îAir cleaner 33

îClutch 37

îFuse replacement 48

îStop lamp switch 48

îRear wheel (Drum type) 52

CATALYTIC CONVERTER 53

îFront wheel removal (Disc type) 51

BASIC TROUBLESHOOTING 55

HERO GENUINE PARTS

WARRANTY DETAILS

ZONAL/REGIONAL/AREA OFFICES

ROAD SIGNS 57

WASHING THE MOTORCYCLE 52

îSuspension 50

EVAPORATIVE EMISSION CONTROL 53

îHeadlamp adjustment 49

îFront wheel removal (Drum type) 50

VEHICLE IDENTIFICATION

1

Model: Passion Pro VIN

Cast wheel/Kick start/Drum

Spoke wheel/Kick start/Drum

Variants

Cast wheel/Electric start/Drum/i3s

Spoke wheel/Electric start/Drum/i3s

Vehicle Identification Number (VIN)

Location: Stamped on the right side of the

steering head tube.

Engine No.

Location: Stamped on the lower side of the

left crankcase.

Cast wheel/Electric start/Disc/i3s

AB

AC

Engine

MBLXXS12XYZXYYYYY

XXXXACY

ZXYYYYY

VIN and Engine No. may be required:

1. During registration of the vehicle.

2. For dealing with Legal & Insurance Departments.

VIN: MBLXXS12XYZXYYYYY

MBL XXS12 Y

Manufacturer

code Vehicle

Description Model Year

X

Check

Digit

Engine No.: XXXXACYZXYYYYY

XXXXAC Y Z

Engine

Description Year of

Manufacturing Assembly Plant

ZX YYYYY

Plant

Code Month of

Manufacturing Production

Serial Number

X YYYYY

Month of

Manufacturing Serial Number

028

714

H17

R18

S12

2

SPECIFICATIONSITEM

Dimensions

Overall length

Overall width

Overall height

Wheelbase

Saddle height

Ground clearance

Kerb weight

1980 mm

765 mm

1075 mm

1235 mm

795 mm

165 mm

112 kg (Kick Start/Drum)

Weight

Engine oil

Fuel tank

Fuel reserve capacity

Front fork oil disassembly

Maximum power

Maximum torque

Bore and stroke

Compression ratio

Displacement

Spark plug gap

Valve clearance (cold)

Idle speed

Front Suspension

Rear Suspension

1.05 litres at disassembly and 0.85 litre at draining

12.5 litres (Minimum)

1.0 litre (Usable)

163±1.75 ml

6.15 kW (8.36 Ps) @ 8000 r/min

0.82 kgf-m (8.05 N-m) @ 5000 r/min

50.0x49.5 mm

9.9:1

97.2 cc

0.6-0.7 mm

0.10 mm

1400±100 r/min

Telescopic Hydraulic Shock Absorbers

Swingarm with 5 step adjustable Hydraulic

Shock Absorbers

Capacities

Engine

Intake (cold)

Exhaust (cold)

Chassis and suspension

Spark plug NGK-CR7HSA, BOSCH-UR4AC,

Champion-P-RZ9HC (Federal Mogul)

PRODUCT SPECIFICATION

115 kg (Electric Start/Drum)

116 kg (Electric Start/Disc)

3

PRODUCT SPECIFICATION SPECIFICATIONSITEM

*MFR stands for Multi-Focal Reflector

**MF stands for Maintenance Free

12V-5/21W-*MFR

Trail length 85 mm

Tyre size 2.75x18-4PR/42P

3.00x18-6PR/52P

Front

Rear

Primary reduction

Final reduction

st

Gear ratio, 1

rd

3th

4

Battery

Alternator

Starting system

Headlamp (High/Low)

Tail/Stop lamp

Turn signal lamp

Meter illumination

Neutral indicator

Turn signal indicator

Position lamp

Hi Beam indicator

Side stand indicator

Fuse

3.722 (67/18)

3.071 (43/14)

3.181 (35/11)

1.706 (29/17)

1.238 (26/21)

0.958 (23/24)

**MF Battery, ETZ-3:12V-3Ah (Kick Start),

ETZ-4:12V-3Ah (Electric Start)

115 W

Kick/Electric Start (Optional) [i3s idle stop start system]

7A/10A (Kick start), 10A/15A ( Electric start)

Transmission

Electricals

Spoke Wheel/Cast Wheel (Optional)

Front Wheel

Rear Wheel

nd

2

Brakes Disc. Dia. 240 mm (Optional)

Dia. 130 mm

Front (Disc type)

Front (Drum type)

Rear (Drum type)

12V-35/35W Trapezoidal Halogen Bulb-*MFR

L.E.D.

12V-3.0W

L.E.D.

12V-1.12W

L.E.D.

12V-10Wx4 (Amber bulb) with clear lens- MFR*

Caster 26°

L.E.D.

i3s indicator

MOTORCYCLE SAFETY

IMPORTANT SAFETY INFORMATION

Your motorcycle can provide many years of

service and pleasure if you take responsibility

for your own safety and understand the

challenges you can meet on the road.

There is much that you can do to protect

yourself when you ride. You will find many

helpful recommendations through out this

manual. Following are a few that we consider

most important.

Even if you have ridden other motorcycles,

practice riding in a safe area to become

familiar with how this motorcycle works and

handles, and to become accustomed to the

motorcycle's size and weight.

Before riding your motorcycle

Make sure that you are physically fit, mentally

focused and free of alcohol and drugs. Check

that you and your pillion are both wearing an

approved motorcycle helmet and protective

apparel. Instruct your pillion on holding onto

the grab rail or your waist, leaning with you in

turns, and keeping their feet on the footrest,

even when the motorcycle is stopped.

Take time to learn & practice your

motorcycle

It is a proven fact, Helmet significantly reduces

the number and severity of head injuries. So

always wear a helmet and make sure your pillion

rider does the same. We also recommend that

you wear eye protection, sturdy boots, gloves

and other protective gear.

Always wear a helmet

Always pay due attention to other vehicles

around you, and do not assume that other

drivers see you. Be prepared to stop quickly or

perform an evasive maneuver.

Some drivers do not see because motorcycles

they are not looking for them. To make yourself

more visible, wear bright reflective clothing,

position yourself so that others can see you,

signal before turning or changing lanes, and use

horn which will help others to notice you.

Make yourself easily visible

Ride within your limits

Ride defensively

Do not drink and ride

Riding under the influence of alcohol or drugs

is dangerous. Alcohol can reduce your ability

to respond to changing conditions and reduce

the reaction time. Do not drink and ride.

Keep your vehicle in safe condition

For safe riding, its important to inspect your

vehicle before every ride and perform all

recommended maintenance. Never exceed

load limits, and use accessories that have been

recommended by Hero MotoCorp for this

vehicle.

Pushing the limits is another major cause of

vehicle accidents. Never ride beyond your

personal abilities or faster than conditions

demand. Remember that fatigue and

negligence can significantly reduce your ability

to make good judgements and ride safely.

4

îSturdy boots with non-slip soles to help

protect your feet and ankles.

Helmets and eye protection

îLeather gloves to keep your hands warm

and help prevent blisters, cuts, burns, and

bruises.

îA two wheeler riding suit or jacket for

comfort as well as protection. Bright

coloured reflective clothing can help make

you more noticeable in traffic. Be sure to

avoid loose clothes that could get caught on

any part of your motorcycle.

Your Helmet is your most important piece of

riding gear because it offers the best

protection against head injuries. A helmet

should fit your head comfortably and securely.

A bright coloured helmet can make you more

noticeable in traffic, as can reflective strips.

An open-face helmet offers some protection,

but a full-face helmet offers more. Always

wear face shield or goggles to protect your

eyes and help your vision.

Additional riding gear

In addition to a helmet and eye protection, we

also recommend:

For your safety, we strongly recommend that

you always wear an approved helmet (ISI

marked), eye protection, boots, gloves, long

pants and a long sleeve shirt or jacket

whenever you ride. Take care of loose/

hanging clothes while solo/pillion riding.

Although complete protection is not possible,

wearing proper gear can reduce the chance of

injury when you ride.

Following are suggestions to help you choose

proper riding gear.

If you decide to continue riding, first evaluate

the condition of your motorcycle. If the engine

is still running, turn it off. Inspect for fluid

leaks, check the tightness of critical nuts and

bolts, and check the handlebar, brake levers,

brakes, and wheels. Ride slowly and

cautiously. Your motorcycle may have

suffered damage that is not immediately

apparent. Have your motorcycle thoroughly

checked at a qualified service facility as soon

as possible.

Personal safety is your first priority. If you or

anyone else has been injured, take time to

assess the severity of the injuries and whether

it is safe to continue riding. Call for emergency

assistance if needed. Also follow applicable

laws and regulations if another person or

vehicle is involved in the crash.

If you are involved in a crash

PROTECTIVE APPAREL

5

îBe sure you and your pillion always wear a

helmet, eye protection and other protective

apparel when you ride.

îNot wearing a helmet increases the chance of

serious injury or death in a crash.

WARNING

!!

SAFE RIDING TIPS

Do's:

îWhile riding, sit in a comfortable position

with your legs close to fuel tank.

îAlways conduct simple pre-ride inspection

(page 21).

îAlways wear a helmet (ISI marked) with

chin strap securely fastened and insist on a

helmet for your pillion rider.

îRide defensively and at a steady speed

(between 40-50 km/hr).

îDuring night time, dip headlamps of your

motorcycle for oncoming traffic, or when

following another vehicle.

îFor stopping motorcycle, use both brakes

simultaneously, keeping throttle in the close

position.

îRespect road signs and obey traffic rules for

your own safety and that of others on the

road (page 57).

îGive way to others on the road and signal

before you make a turn.

îTo make yourself more visible, wear bright

reflective clothing that fits well.

îTightly wrap loose/hanging clothes & avoid

entangling with moving parts.

îGet your motorcycle serviced regularly by

the Authorised Hero MotoCorp workshop.

îBefore riding make sure in which mode you

are riding whether with i3s switch “ON’ or

“OFF”.

îAvoid sudden acceleration, braking and

turning of your motorcycle.

îDo not cross the continuous white/

yellow line in the center of the road, while

overtaking.

îConcentrate on the road and avoid talking

to the pillion rider or others on the road.

îNever take your hands off the steering

handle while riding.

îNever ride under the influence of alcohol or

drugs.

îNever use cell phone while riding the

motorcycle.

Don't:

îNever shift gears without disengaging the

clutch and closing the throttle.

îNever touch any part of the hot exhaust

system like muffler.

îDo not litter the road.

îDo not attach large or heavy items to the

handlebars, front forks, or fenders.

6

îAlways lock the steering and never leave the

key in the ignition switch.

îMany times stolen motorcycles are identified

by information in the Owner's Manuals that

are still with them.

îUse an additional anti-theft device of good

quality.

ANTI-THEFT TIPS

ADDRESS: _______________________________________

We strongly advise you not to remove any

original equipment or modify your motorcycle

in any way that would change its design or

operation. Such changes could seriously

impair your motorcycle's handling, stability

and braking, making it unsafe to ride.

Removing or modifying your lamps, mufflers,

emission control system or other equipment

can also make your motorcycle illegal.

Modifications

îPark your motorcycle in a locked garage

whenever possible.

NAME: _____________________________________________

îPut your name, address and phone number

in this Owner's Manual and keep it in your

motorcycle at all times.

_______________________________________________________

PHONE NO : _____________________________________

7

îImproper accessories or modifications can

cause a crash in which you can be seriously

hurt or killed.

îFollow all instructions in this owner's

manual regarding accessories and

modifications.

WARNING

!!

ACCESSORIES & MODIFICATIONS

Modifying your motorcycle or using non-

Hero MotoCorp accessories can make your

motorcycle unsafe. Before you consider

making any modifications or adding an

accessory, be sure to read the following

information.

Accessories

Make sure that the accessory does not obscure

any lamps, reduce ground clearance, limit

suspension travel or steering travel, affect your

riding position or interfere with operating any

controls.

îBe sure electrical equipment does not

exceed the motorcycle's electrical system

capacity (page 3). A blown fuse can cause

a loss of lights.

îDo not pull a trailer or sidecar with your

motorcycle. This motorcycle was not

designed for these attachments, and their

use can seriously impair your motorcycle's

handling.

TIPS FOR HEALTHY ENVIRONMENT

8

îEmission pollution: Get emission of your motorcycle checked by Authorised agencies atleast

once every 3 months or as notified by the government from time to time.

The following tips shall ensure a healthy motorcycle, healthy environment, and a healthy you.

îRegular servicing: Get your motorcycle serviced at an Authorised Hero MotoCorp

workshop, as per the service schedule, for an optimum performance and keep the emission

level under check.

îGenuine engine oil: Hero 4T Plus SAE 10W 30 SL grade (JASO MA2) engine oil

recommended by Hero MotoCorp and make sure you change it every 6000 kms. (with

top up every 3000 kilometres) to keep the engine fit and environment healthy.

îHealthy engine: The engine is the lifeline of every vehicle. To keep it healthy, it should be

tuned regularly, which will also help reduce pollution and improve vehicle performance &

fuel efficiency.

îGenuine spares: Always insist on Hero MotoCorp genuine parts as spurious or

incompatible spares and accessories can upset or deteriorate your motorcycle’s running

condition.

îNoise pollution: Noise beyond a certain decibel is pollution. Whether it is from horns or

defective mufflers, excessive noise will cause headaches and discomfort.

îFuel saving & reduce pollution: Switch "OFF" the engine while waiting at traffic signal points

to save fuel and reduce pollution, if the waiting period is long.

9

(7) Side stand indicator

(4) Passing switch

(11) Turn signal indicator

(3) Clutch lever

(1) Horn switch

(2) Turn signal switch

(5) Rear view mirror

(9) High beam indicator

(10) Speedometer

(6) Dimmer switch

(8) Neutral indicator

(15) Master cylinder (optional)

(14) Reset button

(17) Front brake lever

(13) i3s indicator (optional)

(22) Leg guard

(20) Ignition switch with steering lock

(18) Throttle grip

(16) i3s switch (optional)

(21) Fuel tank cap

(12) LCD panel

(19) Electric starter switch (optional)

*Accessories and features shown may not be part of standard fitment.

17

18

19

20

21

22

15

610 14

13

11

789

1

5

2

4

TOP VIEW MOTORCYCLE VIEWS

16

12

3

10

(1) Fuel valve

(2) Carburetor

(3) Gearshift pedal

(5) Main stand

(4) Rider foot rest

(6) Side stand

(8) Saree guard with women

pillion step

(10) Reflex reflector

(7) Left side cover

(9) Rear turn signal lamp (14) Side stand switch

(11) Tail/Stop lamp

(12) Rear grip

(13) Seat lock/Helmet hanger

(15) Front turn signal lamp

15

10

11

LEFT SIDE VIEW MOTORCYCLE VIEWS

12

13

14

124567 9

8

3

*Accessories and features shown may not be part of standard fitment.

MOTORCYCLE VIEWS

11

(2) Battery compartment (inside)

(4) Rider foot rest

(5) Rear brake pedal

(1) Pillion foot rest

(3) Kick starter pedal (7) Starter motor (optional)

(9) Front disc (optional)

(8) Caliper (optional)

(6) Oil level dipstick (10) Front suspension

(12) Front visor

(13) Rear suspension

(11) Headlamp

RIGHT SIDE VIEW

13

10

11

12

12345688 97

*Accessories and features shown may not be part of standard fitment.

PARTS FUNCTION

Instruments and Indicators

The indicators are in the speedometer panel

above the headlamp. The functions are as

below.

12

Sl. No. Description Function

(6) Odometer Shows accumulated distance traveled

Indicates approximate fuel quantity in the form of

digital segments. The fuel gauge segments will swing

to the maximum scale on the fuel gauge LCD panel

once when the ignition switch it turned "ON".

(10) Side stand indicator Light glows when the vehicle is parked on the side stand

(11) High beam indicator Light glows when headlamp is in “Hi” Beam

(1) Neutral indicator Light glows when vehicle is in neutral

(2) Speedometer Indicates driving speed

(3) Turn signal indicator Flashes when turn signal switch is operated

(8) Reset button To reset the tripmeter to zero before starting a new trip

(7) Service reminder indicator Displays when the next service is due (page 14)

(5) Tripmeter Shows the distance traveled during a trip

(4) Fuel gauge

5

3

7

4

8

6

11

1 2

9

10

(9) i3s indicator Indicator glows for few seconds and turns “OFF”

indicating that i3s system is functional

13

“OFF” Position/

Lock Open

“LOCK” Position

“ON” Position

Ignition switch

2

1

3

(1) Ignition switch

(2) Ignition key

(3) Steering lock position

The engine can be started, Turn signal lamps,

Horn, Tail/Stoplamp and Passing Switch can be

operated. Fuel Gauge, Odometer and Tripmeter

reading will be functional.

Key cannot be removed

Engine cannot be started and no electrical

system will be functional. Key can be removed

Key can be removed

Key Removal

Steering can be locked

Function

“LOCK”

“ON”

“OFF”

Key Position

Fuel gauge

The fuel gauge (1) is of a Liquid Crystal

Display (LCD) type.

The approximate amount of fuel quantity

available in the fuel tank is indicated by the

number of segments (2) in the display.

If only one segment (3) is displayed and

blinks, this indicates that the fuel quantity is

low and is in reserve. The fuel tank should be

refilled as soon as possible.

Odometer

The Tripmeter (5) shows distanced traveled

per trip. The Tripmeter can be reset to zero by

pressing the RESET button (6).

The Service Reminder Indicator (1) is to

indicate user to bring the vehicle to an

Authorised Hero MotoCorp workshop for

The Odometer (4) shows accumulated

distance traveled.

Tripmeter

Service reminder indicator

service. The indicator shall start blinking when

the vehicle covers kilometers as specified in

the maintenance schedule. The indicator will

keep on blinking throughout the kilometer

interval for a particular service and will stay

‘‘ON’’ thereafter.

The Service Reminder Indicator can be reset

at an Authorised Hero MotoCorp workshop.

2

1

LEFT HANDLEBAR CONTROLS

1. Passing switch

Gives an indication for passing ahead.

Functions in DC when the passing switch

knob is pressed in the following condition.

îHeadlamp switch is “ON” but on low beam.

(1) Fuel gauge (2) Segments

2

1

(1) Fuel gauge (2) Segments

NOTE

After getting the vehicle serviced, make sure that

the Service Reminder Indicator has been reset.

14

536

4

7

(6) Reset button (7) Service reminder indicator

(3) Segment (4) Odometer (5) Tripmeter

Ensure starter switch (1) is operated when the

vehicle is in neutral gear. If the vehicle is

engaged in gear press the clutch lever before

operating the starter switch. Release starter

switch after the engine has started.

4. Horn switch

Press the switch to operate the horn.

There is a clutch switch provided for the safety

of the rider. The motorcycle cannot be started

by electric starter switch until the clutch lever is

operated when the vehicle is engaged in gear.

RIGHT HANDLEBAR CONTROLS

(1) Electric Starter Switch (For electric

start variant)

5. Clutch Switch (For electric start variant)

Select “ ” for high beam and “ ” for

low beam.

2. Dimmer switch

IMPORTANT: To switch “OFF” the turn

signal after completing the turn, gently push

inside.

3. Turn signal lamp switch

Shift the turn signal knob sideways for

right/left indications and leave it to come back

to its normal position on its own.

3

4

15

(1) Electric starter switch (2) i3s switch

2

5

1

2

2. i3s Switch (For i3s variant)

There is an i3s switch provided to enable (2)

the rider for turning i3s mode “ON” or “OFF”

based on the traffic conditions.

the engine and let it idle for 2-3 minutes.

16

îDuring electric or clutch start, the engine will

cut-off if engine reaches 900 r/min if the

relay is engaged for more than 5 seconds.

îNever hold electric starter switch

continuously more than 5 seconds as

continuous cranking of engine will drain the

battery.

CAUTION

!!

(1) i3s switch

(2) i3s indicator

2

1

Steering lock with Ignition switch, turn the

ignition key (1) to "OFF" position & turn the

handle bar towards left or right & push the key

downwards & turn towards "LOCK” position.

After locking take out the key.

STEERING LOCK

1

(1) Ignition key

i3s indicator (2) will glow on the speedometer

console for 2 seconds and turn “OFF”. Start

Keep the i3s switch (1) to “OFF” position.

Turn the ignition key to “ON” position. the

i3s (IDLE STOP START SYSTEM)

Starting & Warm up the engine:

NOTE

îUse choke during cold conditions.

îThe engine will stall if the i3s switch is in

“ON” position during warmup.

17

Initial Activation of the i3s system:

In this condition, the engine can be restarted

either with kick or electric start only.

Driving with i3s Switch in “ON”

position:

Keep the i3s switch (1) to “ON” position.

Turn the Ignition key to “ON” position. The

i3s indicator (2) on the speedometer console

will glow for 2 seconds and turn “OFF”. Start

the vehicle and allow the engine to run in

neutral gear position with the r/min less than

2000 r/min. The engine will cut off in 30

secs. After the rst stop start every subsequent fi

stop will be in 5 secs.

While driving, if the engine is kept idling (while

waiting in a traf c signal ), the engine will cut off fi

in 5 secs. (The vehicle should be in neutral at

less then 2000 r/min with clutch lever/throttle

is in released position) By pressing the clutch

lever, the engine will start again and gear can be

engaged to move the vehicle.

Driving with i3s Switch in “OFF”

position:

While driving in a traffic jam/or very dense

traffic where the vehicle has to encounter a

stop and go situation, the i3s switch can be

changed to “OFF” position. Once this is done,

the i3s system will not work and the vehicle

will be in normal operating conditions as other

vehicles and no special functions will be

performed.

NOTE

·if the relay is engaged for more than 5

seconds.

îIf the vehicle is driven without battery or with

the dead battery, the i3s system will not

work. The i3s indicator on the speedometer

console will start to glow continuously. The

vehicle will be in normal operating

conditions as other vehicles and no special

functions will be performed.

îIf the battery voltage is low, the i3s system

will not work. The i3s indicator on the

speedometer console will start to blink, if the

r/min is less than and the i3s 2000 r/min

indicator goes off if the r/min is more than

2000 r/min. The vehicle will be in normal

operating conditions as other vehicles and

no special functions will be performed.

îDuring electric or clutch start, the engine will

cut-off

·if engine reaches 900 r/min

SIDE STAND INDICATOR/SWITCH

For the safety of the customer a side stand

indicator (1) is provided.

When the vehicle is parked on side stand

(Ignition switch “ON”), an indicator glows in

the speedometer panel.

Page is loading ...

HERO Passion Pro Owner's manual

HERO Passion Pro Owner's manual

Related papers

Other documents