1. Pull the seat cover over the top of the seat
and adjust accordingly for a smooth fit.
2. Slide the seat flap (A) through where the back
of the seat and bottom of the seat meet.
3. Fit the bottom of the seat cover
over the bottom of the seat.
4. Pull the seat flap (A) tightly in place and hook
the two elastic straps onto the flap.
5. Wrap straps (B) located on each side of the
seat cover around to the back and clip
together. Adjust for snug fit.
6. Pull the seat flap strap (C) under the the seat and
clip in front below the pocket. Adjust for snug fit.
Washing Instructions:
• Brush off loose dirt with a dry brush.
• Wash with cold water, if necessary machine wash in
front loading unit with mild soap.
• Hang to dry.
Notice:
Please contact Kurgo directly with any product or
return inquiries. If you have any questions or concerns
please contact us directly before you contact the retailer;
we are great problem solvers. We hope that you will be
happy with your purchase and will think of Kurgo next
time you travel with your dog.
Caution:
Check with your vehicle manufacturer regarding side bag
airbag restrictions. Use of this seat cover may interfere
with deployment of side air bags.
Kurgo Products
• 2D Fanaras Drive, Salisbu
ry, MA 01952
• 877-847-3868
• kur
go.com
• [email protected]m7.14
INSTALLATION INSTRUCTIONS
back of seat
front
of seat
back
of seat
back of seat
See the complete line of
dog travel products
at kurgo.com
Become a fan of Kurgo on
Facebook and receive all the latest
updates, giveaways and contests.