Pulsar AWZ515 Operating instructions

Pulsar
Brand
Pulsar
Model
AWZ515
Category
Security device components
Type
Operating instructions
Relay modules
DC power
AWZ 515 v.1.0/III
PK4 relay module
CODE:
NAME:
DESCRIPTION
The PK4 (AWZ515) relay module is to be used in low-voltage installations. It is intended for controlling
and status indication in e.g. alarm or access control systems. It may be used to control devices of high power
consumption via OC outputs of alarm systems. Moreover, it ensures galvanic isolation of signals, power
sources relating to the outputs of the module. It features a serial fuse in the circuit of the relay
(BELL+, SYGNAL+).
Tel. +48-14-610-19-40, fax: +48-14- 610-19-50, www.pulsar.pl, e-mail:sales@pulsar.pl
Pulsar
®
F1
F 1,5A
F1
F 0,5A
AUX-
COM2
AUX+
NC2
NO2
PGM1
COM3
PGM2
NC3
NO3
COM4
NC4
NO4
COM1
NC1
NO1
BRAK AUX+
PGM1
PGM2
BELL/Wlamanie
BELL+
BELL-
SYGNAL +
SYGNAL -
EN
SPECIFICATIONS
Voltage of the relay’s coil 10÷14V DC (-/+5%),
Current of the relay’s coil
25mA@12VDC
Number of relays 4
Voltage of the relay’s contacts 30VDC / 50VAC max.
Current of the relay’s contacts 2A max.
Contacts of relay
C/NC/NO (leads Φ2.05 mm: AWG 24-12)
ON/OFF time 15ms/8ms (-/+5%)
Operating conditions 2nd environmental class, -10°C÷ 40°C
Enclosure open-frame design, IP00
Dimensions W=75, L=43, H=23 [mm, +/-2]
Net/gross weight
0,063 / 0,092 [kg]
Installation: Mounting pins x 4
Declarations, warranty CE, 2 year from the production date
Notes leads on connections:Ø 0,41÷1,63 (AWG 26-14),
Ø 0,51÷2,05 (AWG 24-12) - relay contacts
  • Page 1 1

Pulsar AWZ515 Operating instructions

Pulsar
Brand
Pulsar
Model
AWZ515
Category
Security device components
Type
Operating instructions
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents