APR-96
REMOVAL AND REPLACEMENT ON/OFF SWITCH
FOR FRYERS
(pre 2000 series models AA, BB, TS, & CPU)
REMOVAL:
1. Remove the control panel and support the panel so that it does not damage wiring or
other components.
2. Disconnect the wires on the switch.
3. Loosen the nut holding the ON/OFF switch, on the front of the control panel, and remove
the switch.
REPLACEMENT:
1. Replace ON/OFF switch onto the front of the control panel. Tighten nut holding.
CAUTION: DO NOT OVERTIGHTEN.
2. Reconnect the wires on the switch.
3. Reconnect the control panel.
SERVICE INSTRUCTIONS
www.keatingofchicago.com 1-800-KEATING
-
1
Keating AA User manual
- Type
- User manual
- This manual is also suitable for
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI