Henny Penny DT-221 Datasheet

Category
Deep fryers
Type
Datasheet
MODEL DT-221
© 2006 Henny Penny Corporation, Eaton, OH 45320 USA Revised 12/29/07
Fryer dump table
PROJECT QUANTITY ITEM NO
General Information
The Henny Penny DT-221 is a
heavy-duty, mobile dump table with a
specially designed dump pan for use
adjacent to Henny Penny fryers.
Standard features
Sturdy welded stainless steel
construction.
Stainless steel dumping pan
features flared sides that help
accumulate product with less waste
and damage.
Dump pan holds one 18 x 26 in.
(457 x 660 mm) sheet pan.
Dump pan detaches for easy
cleaning.
Removable pan rack inserts hold up
to five full size sheet pans.
Four swivel casters, two locking.
DT-221 fryer dump table, shown with standard
sheet pans (available separately) in lower racks.
Henny Penny Corporation
PO Box 60 Eaton OH 45320 USA
+1 937 456.8400 800 417.8417
+1 937 456.8434 Fax 800 417.8434 Fax
www.hennypenny.com
APPROVED APPROVED AS NOTED RESUBMIT
AUTHORIZED SIGNATURE DATE
24 in. (610 mm)
26 ½ in. (826 mm)
Bidding Specifications
Provide Henny Penny dump table model
DT-221 for accumulating fried product from
Henny Penny fryers.
Table frame, racks and dumping pan are of
high quality welded stainless steel.
Flared edges of dumping pan designed to
height of Henny Penny fryer deck.
Dumping pan and lower racks accept
standard sheet pans, available separately.
Ships with (4) heavy-duty swivel casters,
two locking.
Dimensions (handle extended)
Height: 33 3/8 in. (848 mm)
Width: 24 in. (610 mm)
Depth: 26 ½ in. (826 mm)
Crated weight: 69 lbs. (31 kg)
Crated dimensions
Length: 30 ¾ in. (781 mm)
Depth: 25 in. (635 mm)
Height: 33 in. (838 mm)
Volume: 14.7 cu. ft. (0.41 m³)
Laboratory certifications
33 3/8 in.
(848 mm)
  • Page 1 1

Henny Penny DT-221 Datasheet

Category
Deep fryers
Type
Datasheet

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI