Calculated Industries 7418 User guide

Brand
Calculated Industries
Model
7418
Type
User guide
Model 7418
Digital 6"
Caliper
in
Functions:
Inch/mm - Sets caliper’s
display for decimal inches or
millimeters.
0 - Sets display to zero
at any selected position
of the caliper.
On - Turns on power.
The caliper defaults to
a setting of 0.00.
Off - Turns off power. The auto shut-off
will automatically turn off power after 5
to 7 minutes of inactivity.
Battery
Replacement:
Turn Off caliper.
Remove locking screw
and battery door
on the top of the unit.
Replace CR2032 (or
equivalent) battery,
positive side down in clip.
Replace battery door and
locking screw.
Measurements:
The A
CCUMASTER DIGITAL 6"
C
ALIPER can perform four
different measurements.
External
À
Internal
Ã
Step
Õ
Depth
In-between Value:
When measuring in decimal inches (or millimeters), your caliper precisely
displays 4 (or 2) significant digits. If the actual value of the last digit falls
between the displayable resolution (±0.0005" or ±0.01mm), the caliper is
designed to blink the last digit to alert you of this in-between value condition.
Visit AccuMASTER.com to see our entire line of AccuMASTER woodworking tools.
UG7418E-A
4840 Hytech Drive,
Carson City, NV
89706 USA
1-775-885-4900
E-mail: info@calculated.com
calculated.com
Digital 6" Caliper
Model 7418
Õ
Battery
Door
Locking
Screw
À
Ã
Thumb Wheel
IP54
Certified
Splashing
water and
dust-resistant
  • Page 1 1

Calculated Industries 7418 User guide

Brand
Calculated Industries
Model
7418
Type
User guide
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents