American Standard 0403008.020 Operating instructions

Brand: American Standard

Model: 0403008.020

Type: Operating instructions

This manual is also suitable for

J58

COUNTERTOP

FINISHED FLOOR

FINISHED

WALL

31" (787mm)

SUGGESTED

34" (864mm)

ADA

24"

(610mm)

5-1/2"

(141mm)

34"

(864mm)

27"

(686mm)

(203mm)

(152mm )

(229mm)

FINISHED WALL

OR BACKSPLASH

18-1/2"

(470mm)

8-1/2"

(213mm)

3-1/4"

(82mm)

4"or 8"

(102 or 203mm)

10"

(254mm)

21"

(531mm)

(203mm)

1-1/4"

O.D.

WASTE

1-1/4" OD

TAILPIECE

SUPPLIES

REQUIRED

7-1/2"

(191mm)

1-3/4"(43mm)

10-1/8"

(258mm)

12"

(305mm)

1/2" (13mm) DIA. HOLES

FOR ANCHOR BOLTS

TROPIC PETITE

COUNTERTOP SINK

VITREOUS CHINA

TROPIC PETITE COUNTERTOP SINK

• Vitreous china

• Contemporary styled lavatory

• Rear overow

• Faucet ledge with large deck area

• Recommended Tropic faucets 7038.801

Widespread (illustrated) and 7038.201

Centerset not included

• Unglazed sink back must be mounted against

back wall

• Recommended with 9212.030 Tropic 30" vanity

and 9212.124 Marble Top

• Style coordinates with

Tropic Cadet

3 toilets

❏ 0403.008 Lavatory slab-203mm

(8") centers (Illustrated)

❏ 0403.004 Lavatory slab-102mm

(4") centers

Nominal Dimensions:

531mm x 470mm

(21" x 18-1/2")

Bowl sizes:

445mm (17-1/2") wide,

292mm (11-1/2") front to back,

152mm (5-1/2") deep

Compliance Certications -

Meets or Exceeds the

Following Specications:

• ASME A112.19.2 - 2008/CSA B45.1-08

To Be Specied:

❏ Color: ❏ White ❏ Bone ❏ Linen ❏ Black

❏ Faucet: ❏ 7038.801 Tropic Widespread

❏ 7038.201 Tropic Centerset

❏ Faucet Finish:

❏ 002 Polished Chrome

❏ 295 Satin Nickel

❏ Supplies:

❏ 1-1/4" Trap:

❏ Nipple:

* See faucet section for additional models available

NOTES:

DIMENSIONS SHOWN FOR LOCATION OF SUPPLIES AND “P" TRAPS

ARE SUGGESTED.

■ SUITABLE FOR REINFORCEMENT ONLY. ACTUAL DIMENSIONS MUST

BE TAKEN FROM FIXTURE.

FITTING NOT INCLUDED AND MUST BE ORDERED SEPARATELY.

PROVIDE SUITABLE REINFORCEMENT FOR ALL WALL SUPPORTS.

INSTALLATION INSTRUCTIONS SUPPLIED WITH LAVATORY.

IMPORTANT: Dimensions of xtures are nominal and may vary within the

range of tolerance established by ANSI Standard A112.19.2

These measurements are subject to change or cancellation. No responsibility

is assumed for use of superseded or voided pages.

MEETS THE AMERICANS WITH DISABILITIES ACT GUIDELINES

AND ANSI A117.1 ACCESSIBLE AND USABLE

BUILDINGS AND FACILITIES - CHECK LOCAL CODES.

Install lavatory 864mm (34") from finished floor.

Lavatory installed 51mm (2") minimum from front edge

of countertop provides 686mm (27") knee clearance.

American Standard 0403008.020 Operating instructions

Brand: American Standard

Model: 0403008.020

Type: Operating instructions

This manual is also suitable for

Download PDF

report

American Standard 0403008.020 Operating instructions

This manual is also suitable for

American Standard 0403008.020 Operating instructions

Related papers

Other documents