DFI ES520, ES520-CD Installation Guide User manual

  • Hello! I am an AI chatbot trained to assist you with the DFI ES520 User manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
  • What is the power adapter rating for the ES520-CD system unit?
    How many USB 2.0 ports are available on the front panel?
    Does the ES520-CD have a built-in Wi-Fi module?
    How many SATA drives can be installed in the ES520-CD?
    What type of memory does the ES520-CD use?
    What is the maximum memory capacity of the ES520-CD?
    What are the dimensions of the ES520-CD?
    What operating systems are supported by the ES520-CD?
1
ES520-CD Installation Guide
1 ES520-CD system unit
1 Power adapter: 60W
1 Quick Installation Guide
1 CD disk includes:
- Drivers / Manual
Package Contents
Panel
Front View
DFI reserves the right to change the speci cations at any time prior to the product's release. For the latest revision and for a more
details of the installation process, please refer to the user's manual on the website.
www.d .com
Rear View
Power LED
HDD LED
USB 2.0
Power
Reset
Mic-in
Wi-Fi Module
Antenna Hole
Wi-Fi Module
Antenna Hole
COM (optional)
VGA
Line-out
LAN
USB 2.0
DC-in
COM
2
1. Remove the 4 mounting screws to open the cover on the bottom
of the system.
Installing a 2.5" SATA Drive
2. Fasten the 4 mounting screws that secure the HDD brackets rmly
to the system cover.
Mounting screw
Mounting screw
HDD bracket
3
3. Align the mounting holes of the SATA drive with the mounting
holes on the HDD brackets and then use the provided mounting
screws to secure the drive in place.
Mounting screw
Mounting screw
SATA drive
HDD bracket
4
4. Connect the SATA data cable and the SATA power cable to the
connectors on the SATA drive.
Mounting screw
5. After completing steps above, fasten the cover with 4 mounting
screws.
SATA power
cable
SATA data
cable
5
www.d .com
934-ES520D-0A0G
A34101438
Board Layout and Jumper Settings
Power-on Select JP5
Power-on via power button
(default)
1-2 On
Auto power-on 2-3 On
Intel
NM10
Intel Atom
DC-in
VGA
LAN 2
COM 1
1
Power-on Select
(JP5)
1
COM4
1
2
9
10
1
2
9
10
COM3
COM6
1
2
9
10
COM2
COM5
1
2
9
10
1
2
9
10
1
2
5
6
COM2
RS232/422/485
Select (JP3)
1
LAN 1
1
System Fan
1
Battery
1
2
12
Front Panel
1
11
1
8
DIO
LCD/ Inverter
Power
40
39
1
2
LVDS LCD
Panel
DDR3 SODIMM
CPU Fan
1
USB 2-3
1
2
9
USB 4-5
1
2
9
1
9
10
Front Audio
1
2
5
6
SPI Flash BIOS
Standby Power
LED
SATA 0
USB 0-1
1
DIO Power
Fintek
F81866
1
1
ON
4
5
Intel
WG82574L
Intel
WG82574L
SATA Power
Chassis Intrusion
USB 2-5 Power
Seletct (JP6)
USB 0-1 Power
Select (JP4)
Panel Power
Select (JP2)
1
Clear
CMOS (JP7)
1
3
Mini PCIe/mSATA Select (JP8)
10
12
D2550/ N2800/
N2600
LVDS Panel
Select (SW2)
1
8
USB 2.0
USB 2.0
Panel Power Select JP2
+12V 1-2 On
+5V 3-4 On
+3.3V (default) 5-6 On
Mini PCIe
CompactFlash
Socket
TOP
BOTTOM
LVDS Panel Select Channel SW2
800x600 6/18 bit Single 1-4 On
1024x768 6/18 bit Single 2-4 On, 1 Off
1024x768 8/24 bit Single 1,3,4 On, 2 Off
1280X768 6/18 bit Single 3-4 On, 1-2 Off
1280X800 6/18 bit Single 1,2,4 On, 3 Off
1280X960 6/18 bit Single 2,4 On, 1,3 Off
1280X1024 8/24 bit Dual 1,4 On, 2,3 Off
1366X768 6/18 bit Single 4 On, 1-3 Off
1366X768 8/24 bit Single 1-3 On, 4 Off
1440X900 8/24 bit Dual 2-3 On, 1,4 Off
1400X1050 8/24 bit Dual 1,3 On, 2,4 Off
1600X900 8/24 bit Dual 3 On, 1,2,4 Off
1680X1050 8/24 bit Dual 1-2 On, 3-4 Off
1600X1200 8/24 bit Dual 2 On, 1,3,4 Off
1920X1080 8/24 bit Dual 1 On, 2-4 Off
1920X1200 8/24 bit Dual 1-4 Off
USB Power: 0-1 (JP4)/ 2-5 (JP6)
+5V (default) 1-2 On
+5V_standby 2-3 On
Clear CMOS JP7
Normal (default) 1-2 On
Clear CMOS 2-3 On
COM 2 RS232/RS422/
RS485 Select
JP3
RS232 (default) 1-2 On
RS422 Full Duplex 3-4 On
RS485 5-6 On
Mini PCIe/mSATA Select JP8
Mini PCIe (default) 1-4-7-10 On
2-5-8-11 On
mSATA 2-5-8-10 On
3-6-9-12 On
/