MASSEY FERGUSON 1655 Product Information Manual

Product Information Guide

1600 Series

Insert Picture

Preferably a CAD drawing

INTRODUCTION

MASSEY FERGUSON

®

1600 SERIES

110-1

INTRODUCTION

Massey Ferguson is proud to introduce the 1600 series compact tractors. This sleek new

series presents six new models.

The new styling of the Massey Ferguson 1600 series shares the Massey Ferguson family

appearance. The contoured one piece flip up hood allows easy access to the engine

compartment for service and maintenance. The deluxe seat with arm rests provides plenty of

comfort to operate all day. The newly designed controls makes the tractor even easier to use.

The versatility of compact tractors have allowed them to become an essential tool for many

applications, from farm work to landscaping. The ability to multi-task allows these tractors to

become a perfect fit for the homeowner or professional. A variety of attachments allow these

tractors to adapt to any task. Loaders and backhoes are available for every model. Front

mounted snow blowers, blades and rotary brooms are also available, as well as countless

three point hitch implements, including tillers, mowers and blades.

FEATURES AND BENEFITS

MASSEY FERGUSON

®

1600 SERIES

210-1

ENGINE

The Massey Ferguson 1600 series compact tractors use an Iseki liquid cooled, indirect

injection diesel engine. These Tier IV Interim engines deliver optimum power while maintaining

high efficiency levels and going beyond current emissions standards.

The 1635 utilizes a three cylinder engine, while the 1643, 1648, 1652, 1655 and 1660 use four

cylinder engines. All the 1600 series engines are naturally aspirated.

The engine in the 1635 has a longer stroke then the previous model. The crankshaft has been

induction hardened to increase output power while using the same size pin, reducing friction

and increasing fuel efficiency. The larger water pump allows for more coolant to run through

the cooling system.

The glow plug starting aid is standard equipment for use in cold weather. There is a field

installed engine coolant heater available for extreme cold weather climates.

FEATURES AND BENEFITS

MASSEY FERGUSON

®

1600 SERIES

220-1

TRANSMISSION

The Massey Ferguson 1600 series offers four types of transmissions, the three range hydro-

static, 8x8 SynchroShuttle, 12x12 PowerShuttle and DynaQPS™. With these proven trans-

missions there will be no problem finding the perfect tractor to meet any customer’s needs.

1635 1648 1652 1655

Hydrostatic

Platform

Cab

Platform

Cab

Platform

Cab

8x8

SynchroShuttle

Platform Platform

12x12

PowerShuttle

Platform

Cab

Platform Platform Cab

DynaQPS™

Cab Cab

1643

Platform

Cab

Platform

Cab

1660

Platform

Cab

FEATURES AND BENEFITS

MASSEY FERGUSON

®

1600 SERIES

220-2

Three Range Hydrostatic Transmission

The hydrostatic transmission is offered in the 1635, 1643, 1648, and 1652 platform and cab

models.

In order to change the non-synchronized ranges, the tractor must come to a complete stop,

and using the inline range shift lever, located on the left console choose the correct range.

The side by side pedal forward and reverse pedals make it easy to change directions and give

the operator more room on the platform. The brake pedals have been moved to the left hand

side for convenience.

The hydrostatic transmission is excellent for applications that require frequent direction

changes and speed variations. This transmission is easy to use for any operator.

FEATURES AND BENEFITS

MASSEY FERGUSON

®

1600 SERIES

220-3

Cruise Control

Cruise control is standard on all hydrostatic models. With cruise control the operator can

maintain constant forward speed. To engage cruise control, depress the forward pedal to the

desired speed and pull back the control lever. To slow down, depress the reverse pedal.

Cruise control can be disengaged by depressing the brakes or placing the control lever in the

off position.

1

5

4

3

2

1. Cruise Control

2. Range Selector

3. 4wd Engagement

4. Rear PTO Disconnect

5. Mid PTO Disconnect

FEATURES AND BENEFITS

MASSEY FERGUSON

®

1600 SERIES

220-4

8 x 8 SynchroShuttle Transmission

Available in the 1643, 1648, and 1655, this transmission provides an economical shuttle shift.

The two non-synchronized ranges and four non-synchronized gears present eight forward

and eight reverse speeds. Range and gear changes are made by fully depressing the clutch,

bringing the tractor to a complete stop and selecting the proper range/gear combination. The

gear and range shift levers are located on the left control console.

To change the direction of travel depress the clutch pedal and move the shuttle lever forward

or backward. The shuttle is located on the left side of the steering column.

This transmission is great for applications where frequent changes in direction are required,

such as loader work.

FEATURES AND BENEFITS

MASSEY FERGUSON

®

1600 SERIES

220-5

12 x 12 PowerShuttle Transmission

Available in the 1635, 1643, 1648, 1652 , 1655 and 1660.

This transmission utilizes three non-synchronized ranges and four synchronized gears, pro-

viding twelve forward and twelve reverse speeds with the power shuttle. To shift between the

three ranges the clutch must be fully depressed and the tractor completely stopped. Gear

changes can be made on the go, by simply depressing the clutch pedal and choosing the de-

sired gear. The shift levers are located on the left side control console, the range shift levers

are inline and the gear shift lever is the traditional “H” pattern.

The forward/reverse shuttle lever is located on the left side of the steering column and is con-

trolled by a hydraulic clutch pack, therefore, there is no need to use the foot clutch or stop to

change directions. Just reduce the engine speed and move the shuttle lever to the desired

direction of travel while using the brakes to slow the tractor. Shuttle modulation aids in makes

the transition smooth because it allows the tractor to decrease speed before changing direc-

tion.

FEATURES AND BENEFITS

MASSEY FERGUSON

®

1600 SERIES

220-6

DynaQPS™ Transmission

Available only in the 1648, 1652 and 1660 cab models.

The DynaQPS™ integrates the durability of the gear transmission, the convenience of the hy-

draulic shift and the left hand powershuttle. The three non-synchronized ranges, four gears

and forward/reverse powershuttle provide twelve forward and twelve reverse speeds. To

change ranges the clutch must be completely depressed and the tractor must be stopped, the

range selection lever is located on the left console. The four gears can be selected in each

range using the + and - buttons on the shift lever without the use of the clutch. The power-

shuttle functions the same as on the 12x12 PowerShuttle transmission, with a hydraulic

clutch pack, so there is no need to use the foot clutch when changing directions. The Dy-

naQPS™ transmission is excellent for loader work and other applications in which it is neces-

sary to change speeds and directions frequently. (Note: under heavy loads the tractor will

hesitate when shifting through gears).

FEATURES AND BENEFITS

MASSEY FERGUSON

®

1600 SERIES

230-1

FRAMES & AXLES

The rugged cast iron frame provides strength and durability for a long lasting machine. All

1600 series tractors come equipped with mechanical 4wd that provides better traction, im-

proving the overall performance of the tractor. The differential lock is standard equipment and

the dual brakes can be unlocked to improve turning radius or locked together to ensure a safe

stop.

FEATURES AND BENEFITS

MASSEY FERGUSON

®

1600 SERIES

230-2

Mechanical 4WD Front Axle

The 4WD front axle is standard equipment.

4WD can be engaged or disengaged using

the lever located on the left control console.

Just push the lever down to engage the 4WD

and pull the lever back up to disengage. The

1660 utilizes an engagement lever similar to

the one in the 1500 series.

Differential Lock

To engage the differential lock, use the foot

pedal located on the right side kick panel (left

side kick panel on HST models). The clutch

must be fully depressed and the tractor com-

pletely stopped, then the pedal can be de-

pressed and held until tractor is in motion.

When the rear differential lock is engaged the

rear axles will be locked together causing both

rear tires to turn at the same time, improving

performance in slick conditions. To disengage

the differential lock, depress the clutch pedal

and release the pedal.

Brakes

The wet disc brakes, controlled by dual pedals

provide excellent stopping ability. They can be

unlocked to improve turning radius or locked

together for a quicker stop. They should be

locked together when in transport.

FEATURES AND BENEFITS

MASSEY FERGUSON

®

1600 SERIES

240-1

THREE POINT HITCH/PTO/DRAWBAR

All 1600 series tractors have an ASAE Category I three point hitch that facilitates the use of

many implements. Telescopic lower link ends and telescopic stabilizers make attaching

implements and adjusting the amount of lateral movement easy. Top link draft sensing is

available as a field installed option for applications that require precise three point hitch

control.

All of the 1600 series tractors come equipped with independent power take off (PTO). A

separate hydraulic wet clutch is used to control the engagement of the PTO, making it possible

to engage the PTO independently of the transmission. The independent PTO allows for quick

and easy on the go engagement. The 540 rpm rear PTO is standard equipment. The 2000 rpm

mid PTO is available as a field installed option on the 1635, 1643, 1648 and 1652.

The adjustable drawbar allows the operator adjust the length or remove the drawbar

completely if necessary for certain applications.

FEATURES AND BENEFITS

MASSEY FERGUSON

®

1600 SERIES

240-2

Three Point Hitch Position Control

The position control, located in the right con-

sole will raise and lower the three point hitch.

As the control is moved to the rear of the trac-

tor the hitch will raise, when moved toward the

front of the tractor it will lower.

Three Point Hitch Rate of Drop Control

Used to adjust the speed at which the hitch

lowers, the rate of drop control is located on

the kick panel just below the seat. The knob

can be turned all the way to the lock position

to keep the hitch up when transporting imple-

ments.

Telescopic Lower Link Ends

The telescopic lower link ends are standard

equipment on all 1600 series tractors. The

ends slide out by simply pushing down on the

lever and pulling out the link end, making it

easy to hook up three point mounted imple-

ments. To lock the links ends back in position,

lower the implement to the ground and slowly

back up the tractor until the ends lock in

place.

FEATURES AND BENEFITS

MASSEY FERGUSON

®

1600 SERIES

240-3

Telescopic Stabilizers

The stabilizers allow the operator to adjust the

lateral movement of the lower links. This al-

lows for versatility for different applications,

some jobs may require the need to move,

while more precise work may need the imple-

ment to be locked into one position.

Hitch Leveling

The three point hitch can be leveled using the

crank type adjustment at the rear of the trac-

tor.

Top Link Draft Sensing

Top link draft sensing is a field installed option

for all 1600 series tractors. If draft sensing is

installed, the control lever will be located on

the right side console, next to the three point

hitch position control lever.

FEATURES AND BENEFITS

MASSEY FERGUSON

®

1600 SERIES

240-4

Rear PTO

The 540 rpm rear PTO is standard equipment.

The shaft meets ASAE standards with six

splines and 1 3/8” diameter. A hydraulic brake

engages automatically when the PTO is dis-

engaged to bring the PTO shaft to a stop.

Mid PTO

The 2000 rpm mid PTO is available as a field

installed option on the 1635 and 1643, 1648,

1652. The shaft meets ASAE standards with

21 splines and 1” diameter on the 1635 and

the 1 3/8” diameter on the 1643, 1648, and

1652. The mid PTO uses the same brake as

the rear PTO.

FEATURES AND BENEFITS

MASSEY FERGUSON

®

1600 SERIES

240-5

PTO Engagement Switch

The electric PTO switch is located on the right

side of the dash. To turn on the PTO, push

down and turn the switch, to turn it off, simply

push down on it.

PTO Disconnect

The mid and rear PTO disconnect are located

in the left console. These levers will determine

whether the PTO is engaged when the main

control switch is turned on. This makes it pos-

sible for the mid and rear PTO to be operated

at the same time or independently from one

another.

PTO Modulation Button

Next to the yellow PTO engagement switch is

the modulation button. When the button is en-

gaged (the light will be on), the PTO will start

slower and more gently for applications that

require a smooth start.

FEATURES AND BENEFITS

MASSEY FERGUSON

®

1600 SERIES

240-6

Drawbar

The drawbar can be adjusted to various

lengths or removed if necessary for different

applications.

FEATURES AND BENEFITS

MASSEY FERGUSON

®

1600 SERIES

250-1

HYDRAULICS

The open center hydraulic system has two pumps, one for three point hitch and auxiliary

hydraulics and the other is a separate pump dedicated to the power steering. The dedicated

steering pump allows the power steering to always perform properly.

All 1600 series tractors have a factory installed joystick with mid-mount couplers, giving the

tractor a smooth and complete look.

Cab models come equipped with one rear remote valve as standard equipment, but all models

can get up to three rear remote valves field installed.

FEATURES AND BENEFITS

MASSEY FERGUSON

®

1600 SERIES

250-2

Factory Installed Joystick

The factory installed joystick is standard

equipment on all 1600 series tractors. The

joystick is conveniently located on the right

hand side in the control console. Float posi-

tion is provided in the full forward position.

The joystick is raised on the console to pre-

vent unintentional operation.

Joystick Lockout

The factory installed joystick comes equipped

with a joystick lockout to prevent unintentional

operation. When using the joystick, it needs to

be in the unlocked position that is shown in

the picture. To lock the joystick, just pull the

lever up and over.

Mid Mount Valves

The four couplers are mounted directly under

the right front side of the platform. The loca-

tion allows for the use of short hoses making

loader installation and removal easy, as well

as providing a clean appearance.

FEATURES AND BENEFITS

MASSEY FERGUSON

®

1600 SERIES

250-3

Hydraulic Control Levers

The hydraulic control levers are located on the

right side control console and are tiered for

easy operation.

Auxiliary Remotes

Up to three rear remote valves are available

for all 1600 series tractors. For platform mod-

els they are optional field installed, and for

cab models, one valve comes as standard

equipment while an additional two valves can

be field installed.

Page is loading ...

MASSEY FERGUSON 1655 Product Information Manual

This manual is also suitable for

MASSEY FERGUSON 1655 Product Information Manual

Related papers

Other documents