Vacon 20 X - Control Keypad vacon • 1
Service support: find your nearest Vacon service center at www.vacon.com
1
1. VACON 20 X - CONTROL KEYPAD
1.1 mounting instructions
Document code: DPD00985A
1.1.1 Mounting onto the drive
Figure 1. Drive and the optional keypad kit.The optional keypad kit includes: keypad and cable.
Figure 2. Disconnection of the HMI cap from the drive.
1
vacon • 2 Vacon 20 X - Control Keypad
Figure 3. Mounting of the keypad.
Figure 4. Tighten the two screws of the keypad cable to the enclosure of the drive. Keypad
mounted onto the drive.
-
1
-
2
Vacon VACON 20 X Installation guide
- Type
- Installation guide
- This manual is also suitable for
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI